Categories

Best Cylinder Block Design

Kegco Premium Commercial Grade Dual Gauge Two Product CO2 Draft Beer Regulator

  • Dual stage construction & adjustable output pressure. Dual stage construction provides stable output pressure regardless of how much CO2 gas remains inside the CO2 cylinder, eliminating unpredictable catastrophes such as an end-of-tank-dump (EoTD). The output pressure is adjustable from 0-65 PSI based on customers’ different needs..
  • Modular manifold block design. Two manifold blocks are included. Each block comes with its own high-precision needle valve and can be operated independently. You may use one block for one aquarium or use both for two aquariums..
  • Safety and precision in mind. Our regulator has a built-in safety valve. It will open automatically to release the pressure when it exceeds 100 PSI. The integrated needle valve is precise. The CO2 output can be adjusted to as low as 1 bubble every 3 seconds..
  • Solenoid runs on 12V DC instead of conventional 120V AC. This regulator adapts to 12V DC, which is more stable and consumes less power. The solenoid is safe to touch and is very quiet. This solenoid is designed to work with an automatic timer..
Check Stock

OTC 1205 Universal Cylinder Sleeve Puller for Wet-Type Sleeves in Heavy-Duty Engines

  • This tool removes cylinder sleeves faster than ordinary pullers because it requires little setup time - cone adjustment positions puller jaws quickly....
  • To break 'frozen' sleeves loose, adjustable bridge is positioned on the cylinder block then bearing-mounted forcing nut is tightened.
  • Next, bridge is removed and slide hammer assembly is attached - with a few sharp hammer blows from the 5 lb. hammer, sleeve is pulled - an average of....
  • Does not require any special adapters to pull sleeves due to adjustable jaw design.
  • adjustable jaws allow use on cylinder sleeves ranging from 3....
  • High-grade materials ensure quality performance over the lifetime of the tool.
Check Stock

G1/4 Threaded Pneumatic 4 Way 7 Port Aluminum Air Hose Inline Manifold Block Splitter, Pneumatic Air Compressor Manifold Fitting (Pack of 2)

  • Operating Temperature: 0 - 60 Degree Celsius.
  • Air cylinder manifold is the starting points for air cylinder systems. Can be mounted in line or at a take-off point easily with the G1/4 diameter threaded hole design..
  • It takes one row of air from a pump, air cylinder, compressor, vacuum engine or other such system and splits it into many..
Check Stock

FZONE Pro Series Aquarium Dual Stage CO2 Regulator Adjustable Output Pressure with DC Solenoid and Integrated High Precision Needle Valve and Bubble Counter

  • Dual stage construction & adjustable output pressure. Dual stage construction provides stable output pressure regardless of how much CO2 gas remains inside the CO2 cylinder, eliminating unpredictable catastrophes such as an end-of-tank-dump (EoTD). The output pressure is adjustable from 0-65 PSI based on customers’ different needs..
  • Modular manifold block design. Two manifold blocks are included. Each block comes with its own high-precision needle valve and can be operated independently. You may use one block for one aquarium or use both for two aquariums..
  • Safety and precision in mind. Our regulator has a built-in safety valve. It will open automatically to release the pressure when it exceeds 100 PSI. The integrated needle valve is precise. The CO2 output can be adjusted to as low as 1 bubble every 3 seconds..
  • Solenoid runs on 12V DC instead of conventional 120V AC. This regulator adapts to 12V DC, which is more stable and consumes less power. The solenoid is safe to touch and is very quiet. This solenoid is designed to work with an automatic timer..
Check Stock

SRC40 Swing Clamp Cylinder 90 Degrees Large Rotary Actuator Pneumatic Clamping Cylinder (SRC40x90L)

  • Excellent Material: This pneumatic swing clamping cylinder is made of pure aluminum block through CNC machining center, non-die-casting aluminum, high density and high strength, support long time work..
  • Hard Oxidation Treatment: The mirror inner wall surface of this pneumatic swing clamping cylinder is hard anodized to prolong the service life of the cylinder..
  • Protective Layer: The hard protective layer of this pneumatic swing clamping cylinder is not easy to be worn, not easy to be corroded, and can be used in harsh working environments..
  • Features: This pneumatic swing clamping cylinder has high consistency of water inlet and outlet, quick joint installation, and is not easy to leak.
  • left-turn-L and right-turn-R are optional..
  • Use Pressure Range: The pressure range of this pneumatic swing clamping cylinder is 1-7kgf/cm(Kpa)..
Check Stock

Isky Racing Cams 100-GRM Groove-O-Matic Engine Block Ringing Tool

  • Pilots in the cylinder bore & is easily adjustable for bore diameter and depth of cut for the copper 0-ring groove.
  • Fast and profitable way to "0-Ring" the cylinder block face.
Check Stock

XS-Power 93-01 HONDA PRELUDE H22A1 H22a4 h22a HEADER GASKET exhaust manifold gasket

  • Sturdy & Durable: This complete cylinder head is made of premium aluminum material, which can endure high pressure, and overheating, not easy to be....
  • Precisely Matched: It adopts advanced casting skills to build a high strength and stiffed cylinder head assembly, with an accurate dimension to help....
  • Superior Performance: The engine cylinder heads feature a compact structure, sits above the cylinders on top of the cylinder block. It traps or....
  • Complete & Assembled: Each of our cylinder head has gone through very strict quality inspections before being taken out of the factory and all of them....
  • Vehicle Fitment: This is a Cylinder Head, 2.4L SOHC 22R 22RE 22REC Engine Type, which is compatible with 1985-1995 4Runner 2.4L SOHC 8v 4Cyl, 1985....
Check Stock

kweiny Diesel Common Rail 18mm Fuel Injector Cap Block Off Tool

  • Main Usage: Identification of faulty diesel fuel injectors and diagnosis of engine cylinder knocking sounds.
  • Compatibility: Fit with 2006-2011 6.6L Chevy/GMC Duramax (LBZ & LMM) and for Dodge/Cummins 2007-2017 6.7L, Renault engine system, and other vehicles with a 18mm fuel line nut.
  • Working principle: Block the fuel supply to the detected cylinder, and sealed diesel common rail pipe. Make the detected cylinder temporarily stop working.
  • Specification: M18x1.5mm internal thread nut.
  • Material: Carbon tool steel, surface antirust..
Check Stock

kweiny Diesel Common Rail 14mm Fuel Injector Cap Block Off Tool

  • Main Usage: Identification of faulty diesel fuel injectors and diagnosis of engine cylinder knocking sounds.
  • Compatibility: Fit with 2001-2005 6.6L Chevy/GMC Duramax and for Dodge/Cummins 2003-2007 5.9L, for Bosch diesel common rail system, and other vehicles with a 14mm fuel line nut.
  • Working principle: Block the fuel supply to the detected cylinder, and sealed diesel common rail pipe. Make the detected cylinder temporarily stop working.
  • Specification: M14x1.5mm internal thread nut.
  • Material: Carbon tool steel, surface antirust..
Check Stock

TOP NOTCH PARTS CYLINDER PISTON HEAD POLISHED PORT COVER CAM SHAFT CAMSHAFT FITS HONDA TRX400EX TRX 400EX 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008

  • Replaces OEM Part # 14000-HN1-000, 13011-KCY-670, 13101-KCY-670, 12100-KCY-670, 12200-KCY-670, 12310-HN1-010.
  • FITS HONDA TRX 400EX CYLINDER BLOCK, CYLINDER HEAD POLISHED INTAKE AND EXHAUST PORT, VALVE COVER & PERFORMANCE CAMSHAFT.
  • CAMSHAFTDOES NOT USE THE AUTO-DECOMPRESSION MECHANISM.
  • PURCHASE INCLUDES: 1X CYLINDER HEAD. 1X VALVE COVER. 1X CYLINDER. 1X CAMSHAFT. 1X PISTON. 1X PISTON PIN. 2X CIRCLIPS. 1X COMPLETE SET OF RINGS. 1X....
Check Stock

J-35597-A 5874 Cylinder Liner Installer Tool Fits for 60 Series Detroit Diesel Engines DD60 Tool Alternative

  • 【Great Compatibility】Perfectly fits for Detroit Diesel 60 Series engines. Alternative to OEM part number J-35597-A and 5874..
  • 【High Performance】 Specifically designed to easily and correctly install the cylinder liners without damage, saving your time and energy..
  • 【Easier Work】Simply attach the installer tool with three cylinder head bolts to after inserting the liner into the cylinder block. As the drive....
  • 【Superior Material】Made from quality & high strength carbon steel, prevent corrosion and rust, impact resistance, sturdy and durable. High....
  • 【100% Satisfaction Guarantee】If you're not satisfied with our 5874 Cylinder Liner Installer, simply return it for a full refund in 30 days. While....
Check Stock

150CC GY6 Complete Engine Motor, Air Cooled Scooter ATV Go Kart Engine Motor 8 poles Speed, 4-stroke GY6 Engine w/CVT Transmission Electric Starter Air Cooled for 150cc Full Size ATVs Go Karts

  • 【Cylinder Bore】:Upgrade from 57.4mm to 61mm, Cylinder kits with more power.
  • 【Full sets of parts】: Complete parts is suitable for motorcycle maintenance shop, motorcycle parts supermarket and personal use with nice price..
  • 【Apply to】: GY6 4 stroke 125cc/150cc engine for most of chinese scooter, atv and go karts.
  • 【Parts included】:GY6 180cc Cylinder Head Comp with valves, 61mm Bore Cylinder Block, Set of 61mm Piston Assy, Piston, Rings and Wrist Pin, Gaskets..
  • 【Package in cluded】Cylinder head sets and cylinder kits.
Check Stock

GY6 125cc/150cc Engine Upgrade to 180cc with Cylinder Head Valves and Rebuilt Kit, 61mm Big Bore kits with Piston and Ring Assy for 152QMI 157QMJ Engine Chinese Scooter Moped ATV Go Kart Quad

  • 【Cylinder Bore】:Upgrade from 57.4mm to 61mm, Cylinder kits with more power.
  • 【Full sets of parts】: Complete parts is suitable for motorcycle maintenance shop, motorcycle parts supermarket and personal use with nice price..
  • 【Apply to】: GY6 4 stroke 125cc/150cc engine for most of chinese scooter, atv and go karts.
  • 【Parts included】:GY6 180cc Cylinder Head Comp with valves, 61mm Bore Cylinder Block, Set of 61mm Piston Assy, Piston, Rings and Wrist Pin, Gaskets..
  • 【Package in cluded】Cylinder head sets and cylinder kits.
Check Stock