Categories

Best Cylinder Honing Tool Holder

ProVision PV2 Flexible Fiberscope / Inspection Scope w/ 36 In Non-Obedient Cable

  • 【Scope of application】Cylinder honing tools are suitable for degreasing engine cylinders with diameters from 3/4 in to 2‑1 / 2 in and 1‑1 / 4 in to 3‑1 / 2 in. The manufacturer's part number is 88233.
  • 【Excellent performance】This tool can be used to remove carbon deposits and hot glaze in the cylinder bore. This special tool can be used for small-bore cylinders, such as motorcycles, brakes, and clutch cylinders, ideal for removing rust deposits in old renovations..
  • 【High quality】The cylinder honing three jaws are made of high-quality iron materials, high strength, high hardness, rust and resistance, not easy to wear and not easy to age, and are made of special technology to enhance their stability and performance to ensure excellent durability and long service life ..
  • 【Ergonomics design】The engine cylinder grindstone adopts ergonomics design, which can be comfortably held, effortless to use, easy to operate, labor-saving, and high-efficiency, bringing you a lot of convenience. Flexible shaft, easy to use, and automatic centering. The knurling wheel can adjust the spring pressure of the stone on the cylinder hole..
  • 【Use steps】Spray lubricant on the stone or cylinder hole. Set the whetstone on the drill bit, insert the engine whets....
Check Stock

Osborn 77378SP NovoFlex Honing Tool Silicon Carbide 1200 Max RPM 2.5 Hole Diameter 2.75 Item Diameter 0.25 Shank Diameter

  • Honing Tool: NovoFlex Flexible Honing tools have round, abrasive beads fastened to the ends of flexible filaments.
  • Self-Centering Tool: This self-centering tool will conform to the bore surface providing a consistent, even surface finish over the life of the tool.
  • Flexible Honing Tool: The actual NovoFlex tool will be approximately 10% larger than the hole size but will easily fit in as it is extremely flexible.
  • Cylinder Hone Brush: The brush is perfect for honing brake cylinders.
  • the ATB NovoFlex Flexible Honing Tool will even provide an "edge break" which is....
  • Size: 1200 Max RPM, 2.5" Hole Diameter, 2.75" Item Diameter, 0.25" Shank Diameter.
Check Stock

New Cylinder Engine Hone Kit 2\ to 3\ Honing Machine + 32 PCS.

  • Cylinder Engine Hone Kit 3-1/2" To 6-1/2" + 32 Stones+ 4x Extra Carriers.
  • Stone Grit::120, 180, 220, 320 , Machine Type:Honing Machine Function:HoningModel Year:2021.
  • Heavy Duty CYLINDER ENGINE HONE KIT - 3-1/2" To 6-1/2"HONING MACHINE WITH HONING STONES + Extra Set Of 4x Stone Carriers (As Shown In First Image) COARSE 120, MEDIUM 180, FINE 220, Extra Fine 320 COMPLETE HONING MACHINE - HONE KIT.
  • SIZE – 3-1/2" To 6-1/2" Heavy Duty CYLINDER ENGINE HONE KIT WITH HONING STONES COMPLETE HONING MACHINE - HONE KIT With HONING STONES 8x COARSE 120, 8x MEDIUM 180, 8x FINE 220, 8x SUPERFINE 320.
Check Stock

Block Cylinder Engine Hone KIT 2.5\-5.5\ HONING Machine with 4X HONING Stone

  • New Cylinder Engine Hone Kit 62 to 138 mm + 32 Stones+ 4x Extra Carriers.
  • Stone Grit::120, 180, 220, 320 , Machine Type:Honing Machine Function:HoningModel Year:2021.
  • Heavy Duty CYLINDER ENGINE HONE KIT - 62 to 138 mm HONING MACHINE WITH HONING STONES + Extra Set Of 4x Stone Carriers (As Shown In First Image) COARSE 120, MEDIUM 180, FINE 220, Extra Fine 320 COMPLETE HONING MACHINE - HONE KIT SIZE – 62 to 138 mm.
  • Heavy Duty CYLINDER ENGINE HONE KIT WITH HONING STONES COMPLETE HONING MACHINE - HONE KIT With HONING STONES 8x COARSE 120, 8x MEDIUM 180, 8x FINE 220, 8x SUPERFINE 320.
Check Stock

New Cylinder Engine Hone Kit 34 to 60MM + 32 Set of Stones+ 4X Extra Carriers

  • New Cylinder Engine Hone Kit 88 to 165mm + 32 Stones+ 4x Extra Carriers.
  • Stone Grit::120, 180, 220, 320 , Machine Type:Honing Machine Function:HoningModel Year:2021.
  • Heavy Duty CYLINDER ENGINE HONE KIT - 88 to 165mm HONING MACHINE WITH HONING STONES + Extra Set Of 4x Stone Carriers (As Shown In First Image) COARSE 120, MEDIUM 180, FINE 220, Extra Fine 320 COMPLETE HONING MACHINE - HONE KIT SIZE – 88 to 165mm.
  • Heavy Duty CYLINDER ENGINE HONE KIT WITH HONING STONES COMPLETE HONING MACHINE - HONE KIT With HONING STONES 8x COARSE 120, 8x MEDIUM 180, 8x FINE 220, 8x SUPERFINE 320.
Check Stock

New Cylinder Engine Hone Kit 62 to 138 mm + 32 Stones+ 4X Extra Carriers

  • New Cylinder Engine Hone Kit 34 TO 60MM + 32 Set Of Stones+ 4x Extra Carriers.
  • Heavy Duty CYLINDER ENGINE HONE KIT - 62 to 88 mm HONING MACHINE WITH HONING STONES.
  • Extra Set Of 4x Stone Carriers (As Shown In First Image) COARSE 120, MEDIUM 180, FINE 220, Extra Fine 320 COMPLETE HONING MACHINE - HONE KIT SIZE – 62 mm to 88 mm.
  • Heavy Duty CYLINDER ENGINE HONE KIT WITH HONING STONES COMPLETE HONING MACHINE - HONE KIT With HONING STONES 8x COARSE 120, 8x MEDIUM 180, 8x FINE 220, 8x SUPERFINE 320.
Check Stock

ABN Brake Cylinder Hone – 1-1/8in 3 Stone Piston Honing Tool Cylinder Bore Hone with 3/4in to 2-1/2in Honing Range

  • MAKE BREAK REPAIR JOBS EASIER: Remove carbon, rust, and heat glaze deposits from your caliper and piston cylinder walls with the ABN | 1-1/8 Inch Cylinder Bore Honing Tool Small Engine Cylinder Hone Kit.
  • Compatible with your electric drills, simply lubricate with brake fluid and run at low speeds moving up and down the sides of your engine cylinders.
  • BUILT TO LAST: Constructed of premium metal materials provide this brake caliper hone tool with maximum strength, durability, and longevity.
  • The flexible shaft and spread-control tension nut allow faster cutting and maneuverability.
  • 3 stone design makes insertion easy by self-centering.
  • Stone sleeves add strength and protect your abrasive stones when not in use.
  • PERFECT SIZE FOR YOUR NEEDS: Rigid honing tools for a drill features 3 carbide stones that help you remove glaze build up on your brake cylinders.
  • 220 medium grit stones measure at 1-1/8 by 3/16 by 1/8 inches (2.8 by .5 by .3cm).
  • Square ends of stones make this small brake hone tool ideal for step-cut and blind-end cylinders.
  • ADJUSTABLE RANGE: Easily adjust the range and pressure placed against your cylinders for well-controlled tension and maximum effectiveness in creating a smoother, cleaner surface.
  • Spring and knurled adjusting nut increase tensi....
Check Stock

Berkel HONING TRUING STONE 4000B9-00600

  • Honing Machine 45mm - 65mm + **FREE EXPRESS SHIPPING**.
  • Stone Size : 3" x 5/16" x 5/16" (16 pieces Honing Stones).
  • Stone Grid: 1. Superfine 320, 2. Fine 220, 3. Medium 180, 4. Coarse 120..
  • VINTAGE HALL TOLEDO STYLE PISTON CYLINDER HONING FLOWER KIT.
  • HIGH GRADED CYLINDER ENGINE HONE KIT / HONING KIT..
Check Stock

New Set of 6 Sunnen CV616 CK10 Hone Stones EHU518

  • Honing Machine 62mm - 88mm + **FREE EXPRESS SHIPPING**.
  • Stone Size : 3" x 3/8" x 3/8" (16 pieces Honing Stones).
  • Stone Grid: 1. Superfine 320, 2. Fine 220, 3. Medium 180, 4. Coarse 120..
  • VINTAGE HALL TOLEDO STYLE PISTON CYLINDER HONING FLOWER KIT.
  • HIGH GRADED CYLINDER ENGINE HONE KIT / HONING KIT..
Check Stock

Flex-Hone 4\ (101MM) 320 Grit Silicon Carbide Commercial Grade

  • This brand new sealed in package Commercial Version engine cylinder hone is for 3.825" to 4.055" BORES..
  • 320 grit, Excellent for re-ringing jobs or final bore utilizing performance or Moly rings..
  • Tool is labeled as 4.000" diameter but is actually slightly larger to apply the required wall for force honing a 4.000" bore.
  • Tool is self centering and easy to use, Hone can be used with a 3/8" or 1/2" chuck portable drill or drill press or other.
  • Made in USA by the one of the best cylinder hone manufacturers..
Check Stock

EWK 2\ to 7\ 3 Stones Engine Cylinder Hone Tool Adjustable Cylinder Deglazer Piston Honer 220 Grit

  • 【 Awesome Engine Rebuild 】 EWK cylinder hone tool is perfect to deglaze the walls of cylinders in gasoline and diesel engines. Idea for remove burrs and properly roughen the cylinder walls to produce an oil holding cross hatch pattern and provide an adequate seal..
  • 【 Smooth Surface Deglazing 】Fits 2” to 7 (50.8mm to 177.8mm) diameter brake caliper bores, engine cylinders of automotive, motorcycle and industrial equipment. The 3 pieces adjustable 3” stones are perfect to work with 1/4” power drill for effectively creating friction on cylinder bore..
  • 【 Highly Flexible 】 Adjustable tension screw, controls the spring pressure of stones against cylinder bore to meet different piston diameters. The self-aligning and flexible shaft ensures a smooth movement to get you a nice even hatch pattern bore..
  • 【 Durable & Long Lasting & Replaceable 】 Made of premium steel, maximize the cylinder honing tool with extra strength and durability. The 220 grit stones are replaceable and will worn out gradually depends on how often you use it..
  • 【 EWK Assurance】Excellent WorKing experience guaranteed! EWK provides you premium quality tools and the best service with 12 months warranty. If there is any problem or concern with our products, please contact ....
Check Stock

ATPEAM Engine Cylinder Hone Tool Adjustable Deglazer Set for Grinding Holes from 2 to 7 Diameter with Extra 3-Piece 3 Long Stones 220 Grit

  • High Quality: Constructed of premium metal materials provide this brake caliper hone tool with maximum strength, durability, and longevity.
  • Function: Remove carbon, rust, and heat glaze deposits from your caliper and piston cylinder walls with the 1-1/8 Inch cylinder bore honing tool small....
  • 3 Stone Design: The flexible shaft and spread-control tension nut allow faster cutting and maneuverability.
  • 3 stone design makes insertion easy by....
  • Adjustable Range: Easily adjust the range and pressure placed against your cylinders for well-controlled tension and maximum effectiveness in creating....
  • Wide Application: Compatible with your electric drills, simply lubricate with brake fluid and run at low speeds moving up and down the sides of your....
Check Stock

8milelake Engine Cylinder Hone Deglazer 2 inches-7 inches Adjustable 3 inches Blade with 220 Grit Stones Piston Cylinder Hone

  • This Engine Cylinder Hone Deglazer is use to to deglaze the walls of cylinders in gasoline and diesel engines, help to remove the carbon, rust..
  • Constructed of premium steel and provide this Piston Honing Tool a good strength and durability, and the 220 grit stones are replaceable , easy to use....
  • It use for deglazing engine cylinders 2 inches to 7inches in diameter, with 3 pieces adjustable 3” stones. and fit for engine cylinders of....
  • Knurled wheel adjusts spring pressure of stones against cylinder bore, and fasten the screw down can add more spring pressure, turn the opposite to....
Check Stock