X-PRO Long Case 150cc 4-stroke GY6 Air cooled Moped Scooter Engine with CVT Automatic Transmission, Electric/Kick Start…

  • 【Parameters】Engine type: Gy6 single-cylinder four-stroke, engine oil type: Sf15w-40 without oil, carburetor type: pd24j, carburetor type: horizontal vacuum carburetor, spark plug type: a7tc, ignition type: cfw, cooling: air cooling, oil number: >=87#, compression ratio: 9.2:1, clutch: shoe type automatic centrifugal dry clutch, transmission: cvt, ignition system: Cdi, starting method: electric/kick.
  • 【Specification】 Displacement: 150cc, maximum power (Kw/R/Min): 6kw/7500r/Min, rated power (Kw/R/Min): 5.2kw/7000r/Min, maximum torque (Nm/R/Min) : 7.6nm/6500r/Min, minute steady idle speed 1600±150r/Min, piston diameter: 57.4mm, piston stroke: 57.8mm, bore and stroke 2.26" X 2.28" (57.4mm X 57.8mm), lubrication capacity: 0.26 gallons (1200ml), cylinder working volume: 0.03 gallons (149.6ml), speed: 8 poles.
  • 【Features】 Large-flow oil pump: reduce friction pair wear and prolong engine service life.
  • aluminum cylinder head and cylinder block: improve heat dissipation, reduce weight, and increase engine torque.
  • crankshaft: engine low-speed high torque, crankshaft connecting rod adopts large diameter bearing, Increase the reliability of the bearing.
  • lubricating oil filter: help to remove solid pollutants in the lubricating oil, greatly reduce the wea....
Check Stock

901901 Piston Bumper fit for Porter Cable FR350 FC350 (2 Pack)

  • 901901 Piston Bumper fit for Porter Cable FR350 FC350..
  • This part acts as a cushion when the piston/driver retracts back into the cylinder after being fired..
  • This Piston Bumper is located Cylinder Cap of nail guns..
  • Fit For FC350 Type 1, FC350 Type 2, FC350 Type 3, Fit For FR350 Type 1, FR350 Type 2, FR350 Type 3, Does NOT WORK for the FR350A model..
Check Stock

Piston Bumper Stop 901901 Compatible with Porter Cable FC350 FR350

  • Compatible with FC350 Clipped Head Framing Nailer Kit,FC350 Type 1 Framing Nailer Clip,FC350 Type 2 Framing Nailer Clip,FC350 Type 3 Framing Nailer Clip.
  • Compatible with FR350 Round Head Framing Nailer Kit, FR350 Type 1 Framing Nailer Round, FR350 Type 2 Framing Nailer Round,FR350 Type 3 Framing Nailer Round.
  • This Part Acts as a Cushion When The Piston/Driver Retracts Back Into The Cylinder After Being Fired.This Piston Bumper is Located Cylinder Cap of Nail Guns..
  • Warning:It does not fit FR350 MAG Type 1 nailers!!!.
Check Stock

901901 Piston Bumper Compatible with Porter Cable FR350 FC350 (1)

  • Piston Bumper Part Number: 901901, 886151, this Piston Bumper is located Cylinder Cap of nail guns..
  • Compatible with FC350 Type 1, FC350 Type 2, FC350 Type 3, FR350 Type 1 Round Head Framing Nailer, FR350 Type 2 Round Head Framing Nailer, FR350 Type 3 Round Head Framing Nailer..
  • The Product Function: This part acts as a cushion when the piston/driver retracts back into the cylinder after being fired..
  • Purchase Notes:Pleases make sure the part number of new replacement matches your original equipment before ordering. If you encounter any problem, feel free to let us know. We will be more than happy to reply your message within 24 hours..
Check Stock

Raybestos BH381116 Professional Grade Hydraulic Brake Hose

  • Raybestos Brake Hose is designed to transfer the brake fluid from the master cylinder to the slave cylinder for braking.
  • This hose meets federal standards to ensure performance and safety, while providing longer hose life.
  • It utilizes premium fittings to ensure a good hydraulic seal.
  • Designed to transfer the brake fluid from the master cylinder to the slave cylinder for braking.
Check Stock

VEVOR Hydraulic Cylinder Liner Puller 15 Ton Liner Puller Tool, Both Dry-Type and Wet-Type Fit Diameter of 80mm-140 mm, Universal Cylinder Liner Puller Tool Set for auto Repair and Disassembly

  • 15t Hydraulic Puller: Max Capacity: 15T. This hydraulic cylinder puller is suitable for all cylinders with a diameter of 80-140 mm. Both dry type and wet type can be used. It's ideal for the disassembly of internal combustion engine and cylinder liner..
  • Superior Quality: The hydraulic puller is made of premium steel and processed by precision forging. It is sturdy, corrosion-proof, and has stable performance. The support seats, lead screw, and screw nut are all thickened, which will be more durable..
  • Complete Puller Kit: A complete set of tools required for removing the internal combustion engine and cylinder liner. Every part is included, and they are easy to assemble. Our cylinder-pulling artifact can easily remove the cylinders without damage the original parts..
  • Easy Operation: This 15t cylinder liner puller is very simple to use. All you need to do is adjust the inner diameter of the cylinder liner that you need to pull out, and you can use it directly—no need to take down the crankshaft..
  • Wide Application: Suitable for the removal of internal combustion engines and cylinder liners. Also, suitable for pulling hubs, flanges, gears, bearings, and more. It is a great helper for the auto repair shop, garage, automobile maintenance..
Check Stock

VEVOR Liner Puller Cylinder Liner Puller, Diesel Engines Liner Puller Tool, Both Dry-Type and Wet-Type Fit Diameter of 75 mm-138 mm, Universal Cylinder Liner Puller Tool Set for Auto Repair

  • 75-138 MM Cylinder Liner: This cylinder puller is suitable for all cylinders with a 75-138 mm diameter. Both dry type and wet type can be used. It's ideal for the disassembly of diesel cylinder liner quickly and securely..
  • Premium Pull Plate: Our products are equipped with a total of 7 pcs pull plates (75-80 mm, 85-90 mm, 95-100 mm, 105-110 mm, 115-120 mm, 125-130 mm, 135-138 mm), which have a more extensive disassembly range and more comprehensive functions. 7 pcs pull plates are all cut from 45# steel, thickened, and hardened..
  • Rigid Construction: The manual liner puller is made of premium steel and processed by quenching. It is sturdy, corrosion-proof, and has stable performance. The lead screw and screw nut are all thickened, which will be more durable..
  • Complete Puller Kit: A complete set of tools required for removing the cylinder liner, including pull plates, bearing, cross arm, branch pipe, connecting rod, nuts, and pull root. And it's easy to operate..
  • Wide Application: This tool is designed to quickly remove the cylinder liner and reduce the damage to the cylinder in the process. It is a great helper for the auto repair shop, garage, automobile maintenance..
Check Stock

Stanley Hardware 73-0860 Center Mount Garage Door Dead Bolt

  • Decorative Home Hardware That Adds A Finishing Touch To Any Room.
  • Inside lock with heavy duty steel spring bolt.
  • Key cylinder has a solid brass 5 pin tumbler with cylinder ring.
  • Will replace most locking mechanisms of this type.
Check Stock

Clearwater Cylinder Head - Complete 4.0L OHV Cylinder Head Assembly with Valves & Springs - New Aftermarket Replacement For Jeep Cherokee Laredo - Fits Cast Numbers 0630, 7120, & 0331 - No Core Return

  • SUPERIOR CYLINDER HEAD: As the key to controlling airflow in and out of the cylinders and fuel deployment, our expertly crafted cylinderheads are robust and able to withstand high pressures and extreme temps while retaining their shape, form, and integrity to ensure efficient engine performance..
  • BUILT BETTER: Constructed from durable cast iron, our aftermarket automotive cylinder head is thicker and stronger than the OEM stock factory head in all the critical areas to provide long-lasting, dependable functionality. Head assembly includes valves and springs.
  • MADE FOR YOUR VEHICLE: Jeepers will love this durable and sturdy aftermarket 4.0 liter OHV cylinder head that is precisely designed to work with your Jeep Cherokee Laredo, model years 1991- 2007. This new and complete cylinder head assembly is a perfect-fit replacement for cast numbers: 0630, 7120, and 0331..
  • INSTALLATION READY: We thoroughly clean, inspect, and pressure test all our cylinder heads to ensure the perfect seal between the valve and the seat, performing machine work as needed using the latest state-of-the-art equipment. Each assembled head arrives complete and ready to be installed..
  • Compatible with vehicle type: 1992-2006 Wrangler 4.0L.
Check Stock

XS-Power 93-01 HONDA PRELUDE H22A1 H22a4 h22a HEADER GASKET exhaust manifold gasket

  • Sturdy & Durable: This complete cylinder head is made of premium aluminum material, which can endure high pressure, and overheating, not easy to be....
  • Precisely Matched: It adopts advanced casting skills to build a high strength and stiffed cylinder head assembly, with an accurate dimension to help....
  • Superior Performance: The engine cylinder heads feature a compact structure, sits above the cylinders on top of the cylinder block. It traps or....
  • Complete & Assembled: Each of our cylinder head has gone through very strict quality inspections before being taken out of the factory and all of them....
  • Vehicle Fitment: This is a Cylinder Head, 2.4L SOHC 22R 22RE 22REC Engine Type, which is compatible with 1985-1995 4Runner 2.4L SOHC 8v 4Cyl, 1985....
Check Stock

Bluestorm Gear Cirrus 26 Automatic/Manual Inflatable PFD Life Jacket for Adults | US Coast Guard Approved

  • US COAST GUARD-APPROVED TYPE-V WITH TYPE III PERFORMANCE PERSONAL FLOTATION DEVICE (PFD) inflates automatically upon water immersion via replaceable CO2 cylinder (includes 1 cylinder with purchase) or manually with a pull of the “jerk to inflate” cord or back-up oral inflation tube..
  • LIGHTWEIGHT, COOL AND COMFORTABLE: Life jacket’s ergonomic collar and mesh upper back strap are great for all-day comfort.
  • mesh back strap helps pull the collar down and away from the neck while the long shell design puts the secure waist belt in a lower, more comfortable position on the body.
  • INTERNAL SPARE CO2 CYLINDER POCKET WITH AVAILABLE ACCESSORY ATTACHMENT POINT keeps sunglasses or other gear secure while boating, fishing, kayaking, angling, day sailing and other on-the-water activities.
  • MANUAL ONLY CONVERSION CAP: Locks the Max5 Camo into Manual Only inflation mode for times the PFD will be submerged in water (Duck Hunters, Dock and Shore Workers). The person wearing the life vest must operate this particular vest manually to inflate.
  • 26 LBS OF BUOYANCY: almost twice the minimum buoyancy rating than Type III foam vest personal flotation devices.
Check Stock

Pneumatic Air Cylinder, Double-Acting Cylinder 10mm Diameter 100mm Stroke Pressure 1Mpa Made of Stainless Steel

  • 【SPECIFICATION】 Fluid: Air, Type: Double-acting, Cylinder Diameter: 10mm, Stroke: 100mm, Pipe Size: M5 * 0.8, Pressure: 1Mpa.
  • 【MATERIAL】 The cylinder made of high quality stainless steel, the pneumatic cylinder has long service life.
  • 【FEATURE】 This is a double-acting cylinder which uses the force of air to move in both extend and retract strokes..
  • 【PRACTICAL】 Pneumatic cylinder is quieter, cleaner, and do not require large amounts of space for fluid storage.
  • 【SERVICE】 If you have any questions or need any suggestions about the products we have sold, please feel free to contact us, we will provide you with quality after-sales service..
Check Stock

Cylinder Piston Gasket Cylinder Head Set Fits Yamaha Blaster 200 YFS200 1988-2006

  • Bore 66.00mm x Stroke 57.00mm /Cylinder Displacement is 195cc, The Compression is 6.6:1.
  • This product includes Piston Kit, Gasket Kit, OE Type Cylinder and Head Cylinder.
  • THIS ITEM HAS TO BE INSTALLED BY PROFESSIONAL MECHANICS SPECIALIZED IN ATV AND UTVs.
Check Stock