Categories

Best Cylinder Valve Retainer

labwork Universal Overhead Valve Spring Compressor Valve Removal Installer Tool for Quick Removal of Valve Springs

  • This product is designed for quick removal of the valve spring without removing the cylinder head,fit for most cars and light trucks..
  • Offset pliers facilitate clamping and compression of valve springs..
  • Surface blackened treatment,rust-proof and corrosion-resistant..
  • Perfect for removing valve springs,spring retainers by compressing the valve spring retainer and exposing the valve keeper,remove keepers,uncompress the tool then remove spring..
  • If you have any problem after receiving it,please contact us and we will solve it for you..
Check Stock

BBR Tuning Racing Series DIO Cylinder Body & High Performance 21mm OKO Carburetor Assembly

  • RACE READY PERFORMANCE: With the BBR Tuning Racing Series DIO Cylinder Body & Reed Assembly with OKO 21mm Carburetor w/ Velocity Stack you’ll get the power and speed your build’s been looking for. A ported cylinder body with a high performance reed valve intake system, this race assembly was made for race engines in mind..
  • PORTED CYLINDER: Unlike other cylinders, the BBR Tuning Racing Series DIO Cylinder Body is ported to allow maximum fuel and air mixing within your motor. The exhaust port can fit nearly any performance muffler as well as any stock exhaust muffler you want to run, which the intake port is specifically designed to accept the reed valve assembly included with this kit.
  • BOOSTS POWER: With a 32mm opening, you’ll be able to fit hardcore racing carburetors like the BBR Tuning High Performance 2-Stroke OKO Style Carburetor without a single problem. With the right carburetor, this reed will deliver tons of fuel and air to your motor and give you higher speeds and even more torque..
  • COMPLETE KIT: The BBR Tuning Racing Series DIO Cylinder Body & Reed Assembly is paired with a 21mm OKO Race carburetor is racer’s dream setup- get ready for a bike that’ll scream whenever you hit the gas!.
  • INCLUDES: Modified BBR Tuning Racing Series DIO Cyl....
Check Stock

7Penn Vertical Meat Stuffer – 3L Sausage Stuffer Machine with Vertical Stuffer Nozzles, Manual Sausage Press Machine

  • ...d snack sticks with the 7Penn | Hand Crank Sausage Stuffer Stainless Steel Sausage Casing Machine and Accessories.
  • Customize your seasoning and meat blend and use your preferred meat casings to make the perfect domestic or wild game sausages, hotdogs, and rope bratwurst.
  • EASILY LOAD AND CLEAN: Summer sausage stuffer cylinder tilts out when compression plate is withdrawn completely.
  • 8-inch (20.3cm) tall stainless steel sausage stuffer barrel features a 5.5-inch (14cm) diameter and holds up to 3 liters (7 pounds) of ground meat.
  • Piston, nozzle retainer, sausage filler barrel, and plastic sausage stuffer nozzles are removable for easy cleaning.
  • VARIOUS SIZED NOZZLES: 4 plastic nozzles are included to allow versatility with your sausage making supplies.
  • 15mm (.6 inch) nozzle works well for mini smokies, while the 20mm (.79 inch) nozzle is designed for snack sticks and breakfast sausages.
  • Make hotdogs and rope sausage with the 32mm (1.25 inch) nozzle or bologna and pepperoni rings with the 40mm (1.57 inch) nozzle.
  • Each 7-inch (17.8cm) long nozzle attaches to your meat sausage stuffer machine with the steel nozzle retainer.
  • BUILT TO LAST: Stainless steel gears provide durability and longevity to your new sausage casing stuffer sausage machine.
Check Stock

Tuimiyisou Scuba Diving Tank Valve 250BAR Underwater Gas Cylinder Valve for Underwater Sports Activities Surf&Diving-Swimming&Diving Gloves

  • The Diving Cylinder Valve has a special design which allows for easy and comfortable cylinder handling.
  • Our Tank Valve is made of chrome-plated brasswhich is durable for long term use and it can provide a longer service life and a lower replacement frequency.
  • This Underwater Cylinder Valve will let you know more about the fun of diving and you will have more interest in it.
  • This Diving Tank Valve is engineered with high flow characteristics to maximize regulator performance.
  • The Cylinder Valve has positive hand wheel grip for easy identification of on/off direction.
Check Stock

New 60 cu ft Aluminum Argon Cylinder with CGA580 Valve

  • New, high-quality 20 cf steel helium cylinder with CGA580 valve.
  • 5.24" diameter and 14.76" height (Cylinder).
  • Heavy-duty brass constructed helium balloon inflation valve.
  • Inflation valve complete with regulator and gauge.
  • All cylinder ship empty. Please consult your local compressed gas supplier for filling needs..
Check Stock

GOOFIT Completed Cylinder Head Replacement for 4 Stroke Chinese TaoTao Coolster 110cc Engine ATV Pit Quad Go Kart Dirt Bike

  • intake valve mounting hole distance:45mm/1.77".
  • Exhaust valve mounting hole distance:45mm/1.77".
  • Spark plug:A7TC(Please Be Carefully Check The Goods Appearance,Size,Shape Before Ordering)..
  • Completed Cylinder Head Replacement for 4 Stroke Chinese TaoTao Coolster 110cc Engine ATV Pit Quad Go Kart Dirt Bike.Not Replacement for 125cc Cylinder Head with 23mm and 28mm Intake and Exhaust valves.
  • 52.4mm LIFAN 110CC 125cc Cylinder Engine.
  • Cylinders are used to hold gasoline and air,Where the mixture burns,Expands dramatically,And pushes the piston,Which transmits this force to the crankshaft..
  • High quality cylinder replacement part.High toughness,Corrosion resistance,Rustproof and durable.Has a good heat dissipation structure design,Providing reliable performance and long life service..
  • Warranty:We are always available to help our customers.If you are not satisfied with the order,please leave us a message.Wish you have a happy shopping experience,we are committed to providing the best service..
Check Stock

NON AFM DOD Kit with Camshaft Lifter 5.3 Head Gasket Oil Pump Valley Cover for 2005-2014 Chevy Silverado Suburban GMC Sierra 5.3L Engine

  • ...0 5.3L V8, for 2008-2014 Gmc Yukon 5.3L V8, for 2005-2006 Isuzu Ascender 5.3L V8, for 2005-2009 Saab 9-7x 5.3L V8.
  • NO AFM kit include head gasket, valve cover gasket, valve stem seals, exhaust & intake manifold gasket, front camshaft seal, o-rings, other small gaskets, cylinder head bolts, camshaft, oem gm balancer bolt, non afm roller lifters, lifter trays w/ bolts, front cover gasket set, non afm valley pan cover, high pressure oil pump, camshaft retainer plate gasket.
Check Stock

COMP Cams 127020 Mutha' Thumpr NSR 234/254 Hydraulic Roller Cams for Ford 4.6/5.4L Modular 3-V

  • SOHC - Mutha' Thumpr NSR (NO SPRINGS REQUIRED): Very rough idle, biggest cam for stock heads. Great power above 4900 rpm. Compatible with stock valve springs, benefits from converter and gears, requires cam phaser upgrade and custom tuning..
  • 273/306 Advertised Duration, 234/254 Duration @ .050 inch, .450 inch/.450 inch Lift, 109 Lobe Separation.
  • Part #26113-24 valve springs available but not required.
  • Steel retainer part #710-24 and titanium retainer part #702-24 also available.
Check Stock

AKWH 15810-RKB-J01 VTEC Solenoid Spool Valve with Gasket Replacement for Hon-da Ody-ssey V6 3.5L 2005-2007 Pilot FWD Acc-ord V6 3.0L 2006-2008 15810RKBJ01

  • ...ol Valve OEM Part Number: 15810-RKB-J01 15810RKBJ01. Replacement for 2005-2007 Acc-ord Hybrid, 2005-2007 Ody-ssey EX / EXL / EXL-T, 2006-2008 Pil-ot 2WD MODELS ONLY OF TRIMS: LX / LXVP / EX / EXL / EX-SE P/N 15810-RKB-J01.
  • VTEC Solenoid Spool Valve Replacement for: 2006 Hon-da Ody-ssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2006 Hon-da Ody-ssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
  • 2006 Hon-da Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2005 Hon-da Acc-ord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
  • 2005 Hon-da Ody-ssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2005 Hon-da Ody-ssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head..
  • VTEC Solenoid Spool Valve Replacement for: 2008 Hon-da Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2007 Hon-da Acc-ord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
  • 2007 Hon-da Ody-ssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2007 Hon-da Ody-ssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
  • 2007 Hon-da Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2006 Hon-da Acc-ord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head..
  • VTEC (which stands for Variable Valve Timing and Lift Electronic Control) is an electronic and mechanical system in some Hon-da engines that allows the engine to effectively have multi....
Check Stock

10 CF Acetylene MC and 20 CF Oxygen Cylinder Set

  • 10 cu ft Steel Acetylene Cylinder Size MC CGA520 Valve Installed.
  • 20 cu ft Steel Oxygen Cylinder CGA200 Valve Installed.
  • Professional Safety and Performance Features.
  • All cylinder ship empty. Please consult your local compressed gas supplier for filling needs..
Check Stock

XMT-MOTO Scooter GY6 50CC To 80CC Big Bore Cylinder For VIP Roketa Taotao Baja Silver

  • 【Cylinder Bore】: 47mm / Non-EGR Cylinder.
  • 【Apply to】: GY6 4 stroke 49cc 50cc 60cc 80cc engine upgrade for most of chinese scooter, atv and go karts.
  • 【Parts included】:GY6 80cc Cylinder Head with 64mm valve, 47mm Bore Cylinder Block, Set of 47mm Piston Assy, Piston, Rings and Wrist Pin, Full Set of Engine Gasket, 6pins CDI, Ignition coil, 4pin AC regulator, relay, A7TC Spark Plug, Set of Intake Manifold and Muffler Bolts, and Exhaust locking ha, Set of 8.5 Gram roller , Rocker Arms, Valve Seals, Oil Pump Assy with Driving Gear, Camshaft, Camshaft chain 82, belt 699*18*30, Chain adjuster, Oil screen, spring, cover and oil seal, Starter clutch.
  • 【Fit to】Roketa, Sunl, Baja, Taotao, Panterra, Redcat Tank Giovanni Wildfire Xtreme Seaseng Qlink Yiben Jonway Jmstar, Vento.
Check Stock

Powermate PX P024-0293SP Heavy Duty Air Hammer

  • Steel sleeve inside cylinder absorbs direct shock increasing wear resistance of tool.
  • Double threaded hammer cylinder allows a more solid impact.
  • Soft-touch grip for firm hold and reduced vibration.
  • Professional touch trigger adds comfort and gives user better start/stop control.
  • Handle exhaust keeps heat away from work surface.
  • Quick-change chisel retainer makes changing chisels quick and easy.
  • Includes 4 carbon steel long chisels - Cold chisel, ripping chisel, punch, and panel cutter.
  • Perfect for cutting, chipping, piercing, scraping.
Check Stock

Aluminum Can Crusher Heavy Duty Pneumatic Cylinder Soda Beer Can Crusher Eco-Friendly Recycling Tool Countertop Button Valve

  • Air Cylinder Can Crusher, Just press the button of the valve to smash almost all kinds of aluminum cans..
  • Safe and relialbe: Safety mechanical valve used to avoid misoperation. a special rubber spacer is included to press the valve.
  • Sturdy and Durable: all steel material for the frame and piston, easy to crush any aluminum cans.
  • Bore ID of cylinder: 63mm, Stroke of Cylinder: 200mm, Maximum Can to be cushed: OD 2.8 inch,Height 7 inch.
  • Air compressor is needed to drive the Can crusher..
Check Stock