Vent Motor Assembly Part # 85598000

  • SM550 Universal Range Hood Vent Bathroom Fan Motor: 120 volts, 60Hz, 50CFM, 0.29A , 3000 Rpm. Replace Nutone Broan 65100 Bathroom Vent Fan Motor and Blower Wheel.
  • Kit contains: 1 x motor, 1 x fan = 4.5 (flat/paddle style).
  • Shaft approx. 3/16" x 1 3/4", wire length = 6" with 2-prong plug , Mounting studs 1 7/8" on center,5/8 Coil stack.
  • This motor is a replacement for motors Nutone Broan, Uppco, Ventorola E498-1, Bay Motors, Sears 569, Dayton and many other units. This motor is reversible CCW & CW Rotation . Replaces 65100, VFM100, C65878,33-100,82423K,EM550,K111,EM750,784A,f784a,676d/2676f,763rln and more.
  • Premium quality.For any reason you're not completely satisfied, you can ask for a replacement or full refund, no questions asked.
Check Stock

LAFVIN 5 Sets 28BYJ-48 ULN2003 5V Stepper Motor + ULN2003 Driver Board for Arduino

  • Stepper motor with a standard interface..
  • A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • Drive Module Board Size(in): 1.37*1.18*0.6.
  • 5 line 4 phase can be used for ordinary ULN2003 chip driver, connect to the 2 phase , support the development board,With convenient use, direct docking.
  • Package Content: 5 set 28BYJ-48 Stepper Motor + Uln2003 Driver Board +20pcs female to male Dupont cable (as a gift).
Check Stock

diymore 5-Set DC12V 28BYJ-48 Stepper Motor with ULN2003 Drive Boards Blue(12V)

  • Stepper motor driver board with ULN2003..
  • A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • Stepper motor with a standard interface, when used directly pluggable..
Check Stock

BEMONOC Garage Door Motor 12V DC Right Angle Reversible Electric Gear Motor 45 RPM High Torque

  • Dc gear motor Dimensions: 175 * 62mm/ 6.88 * 2.44in(L * D).
  • ✔Out Shaft: 10mm shaft with 2 flats where flat to flat is 8mm and threaded end to fit a M6 tightening nut.
  • ✔Mounting: M6 screw holes, include 3 screws.
  • Main Material: Metal, Electronic component.
  • ✔Notice: the motor duty cycle is 100%, it can run continuously, it's our fault to make a wrong label, hope you can understand, any other questions....
Check Stock

MybotOnline 5 Sets Stepper Motor 28BYJ-48 ULN2003 5V Stepper Motor + ULN2003 Driver Board

  • Stepper motor with a standard interface, motor diameter: 1.1", wire length: 9.05".
  • A, B, C, D four-phase LED indicates the status of stepper motor work.
  • Compatible with ArduinoIDE UNOR3 MEGA 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi.
  • Gift: 1x 10-pin male to female multicolor breadboard jumper wires,each cable length: 7.87"(20 cm).
  • Packing in a box: 5 sets Uln2003 stepper motor + driver board + 10 pin jumper wire.
Check Stock

6 PCS 28BYJ-48 ULN2003 5V Stepper Motor + ULN2003 Driver Board for Arduino

  • ❃❃ The stepping motor is a kind of mechanical and electrical device that converts electrical pulses into angular displacement. Come with a standard interface, when used directly pluggable..
  • ❃❃ Drive Module Board Size(in): 1.37 * 1.18 * 0.6(in).
  • ❃❃ A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • ❃❃ 5 line 4 phase can be used for ordinary ULN2003 chip driver, Connect to the 2 phase, Support the development board, With convenient use, direct docking..
  • ❃❃ Great packing in a box : 6 PCS ULN2003 Stepper Motor + Driver Board (with a little gift)..
Check Stock

Longruner 5X Geared Stepper Motor 28byj 48 Uln2003 5v Stepper Motor Uln2003 Driver Board with ArduinoIDE (no Wire)

  • 5pcs Stepper motor and driver board compatible with 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi..
  • Stepper motor with a standard interface. A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • Motor diameter: 1.1 inches.Wire length:9.05 inchs. Stepping angle: 5.625 x 1/64.Reduction ratio: 1/6.Drive Module Board Size:1.26 inchsX1.38inchs. Cable length: about 20cm /8-inch..
  • Great packing in a box : 5 set Uln2003 Stepper Motor + Driver Board..
Check Stock

Stepper Motor 12V Dc Reducer Self-Locking Worm Gear Stepping Geared Motors Mini Gearbox 24 Volt Micro Electric Motor Tool 42By Motor (Speed(RPM) : Ratio 1-50, Voltage(V) : 12V)

  • Fundamental Parameters: This brushless electric motor is powerful and efficient. Model: MY1020D, Input Voltage: 48V DC, Output Power: 1800W, Rated Current: ≤ 33A, Rated Speed: 4500 RPM, Maximum Speed: 5600 RPM, Sprocket: T8F-9 Teeth, Horsepower: 2.45 HP, Rated Torque: 3.7 N.m/523.96 oz.in, Maximum Current: 39A, No-load Current: ≤ 4.2A, Peak Efficiency: ≥ 80%, Working Temperature: 003c 120 °C/248 ℉..
  • 1800W Brushless Motor: The brushless dc motor adopts a 100% copper core for low noise operation and excellent speed regulating performance. The high-precision rotor is made of high tech, finish for water resistance and high working efficiency..
  • Sturdy Aluminum Construction: The electric go kart motor features an aluminum alloy shell to resist heat, cold, and corrosion, which is not easy to rust. This dc electric motor is a forward and backward rotation motor so that you can switch the rotation..
  • Speed Controller Included: This brushless go kart motor comes with a controller to provide speed control in the desirable ranger, speed adjustment way: Potentiometer. Model: BY12WF02-C, Current: 33A, Phase Degree: 120°, Conversion Efficiency: ≥ 85%, Under Voltage Protection Voltage: 41V..
  • Multiple Application: Brushless motor is much better than the brushe....
Check Stock

4400RPM 2500W 60V Electric Scooter Motor Brushless DC Motor Kits Electric Gokart Mid Motors with 45A Speed Controller, Throttle, Foot Pedal E-Scooter E-Bike Dirt Bike Motorcycle

  • Fundamental Parameters: This brushless electric motor is powerful and efficient. Model: MY1020D, Input Voltage: 48V DC, Output Power: 1800W, Rated Current: ≤ 33A, Rated Speed: 4500 RPM, Maximum Speed: 5600 RPM, Sprocket: T8F-9 Teeth, Horsepower: 2.45 HP, Rated Torque: 3.7 N.m/523.96 oz.in, Maximum Current: 39A, No-load Current: ≤ 4.2A, Peak Efficiency: ≥ 80%, Working Temperature: 003c 120 °C/248 ℉..
  • 1800W Brushless Motor: The brushless dc motor adopts a 100% copper core for low noise operation and excellent speed regulating performance. The high-precision rotor is made of high tech, finish for water resistance and high working efficiency..
  • Sturdy Aluminum Construction: The electric go kart motor features an aluminum alloy shell to resist heat, cold, and corrosion, which is not easy to rust. This dc electric motor is a forward and backward rotation motor, so you can switch the rotation..
  • Speed Controller Included: This brushless go kart motor comes with a controller to provide speed control in the desirable ranger, speed adjustment way: Potentiometer. Model: BY12WF02-C, Current: 33A, Phase Degree: 120°, Conversion Efficiency: ≥ 85%, Under Voltage Protection Voltage: 41V.
  • Multiple Application: Brushless motor is much better than the brushed mot....
Check Stock

VICOOL FBK-250 (New) Replacement Fireplace Blower KIT for Lennox Superior FBK-250; Rotom #HBRB250

  • ...Unit, 3-prong power cord, rheostat & thermostat, galvanized mounting bracket, noise reduction padding, & installation instructions. Wall switch for blower NOT REQUIRED.
  • Blower Total Length (NOT included mounting bracket) = 12.5″ Width = 3.73″ Height = 3.23″ Flange Opening = 9 1/2″.
  • Thermostat Temperature (approximately): Activate at 120°F / 50°C, shutoff at 90°F / 32°C.
  • Certifications: Rheostat, Thermostat, Motor UL Approved.
  • Cross Reference Numbers: Blower Kit FBK250, FBK-250, Rotom HB-RB250, 80L86,EDVPFNE, EDVCRNE, EDVCLNE, EDVSTNM, EDVSTPM, EDVPFNM, EDVPFPM, EDVCRNM, EDVCRPM, EDVCLNM, EDVCLPM, EDVSTNE, EDVPFNE, EDVCRNE, EDVCLNE, EDVSTNM, EDVSTPM, EDVPFNM, EDVPFPM, EDVCRNM, EDVCRPM, EDVCLNM, EDVCLPM, EDVSTNE, EDVPFNE, EDVCRNE, EDVCLNE, HC, DR-400, DR-500, DR-600, DR-800, D-400, D-500, D-600, D-800, DT-400, DT-500, SSDVST, SSDVPF, SSDVST Series, SSDVPF Series, UVF Series, UVFRC Series, etc.
  • Fit the following Lennox and Superior fireplaces: BC-36-2, BC36, BCI-36, BR-36, BR-36-2, BRI-36, LMDVT-3328, LMDV-3530, LMDV-4035, LMDVR-3328, MPDT-3328, LMDV-3530, LMDV-4035, MPDT-3530, MPDT454....
Check Stock

Kiro&Seeu 2PCS DC5V 28BYJ-48 Geared Stepper Motor with ULN2003 Drive Boards Blue for Arduino (5V)

  • Stepper motor driver board with ULN2003..
  • A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • Stepper motor with a standard interface, when used directly pluggable..
Check Stock

DGZZI 2Set 28BYJ-48 DC 5V Geared Stepper Motor + ULN2003 Driver Test Module Board for Arduino

  • A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • Stepper motor with a standard interface, when used directly pluggable..
  • 5 line 4 phase can be used for ordinary..
  • ULN2003 chip driver, connect to the 2 phase, support the development board, With convenient use, direct docking..
  • Package includes: 2* 28BYJ-48 Stepper Motor + 2* Uln2003 Driver Board.
Check Stock

CenryKay 5pcs ULN2003 28BYJ-48 4-Phase Stepper Motor with 5V Drive Board and 10pcs Dupont Wire Male to Female Breadboard Jumper Wires Compatible with Arduino

  • A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • Stepper motor with a standard interface, when used directly pluggable..
  • The motor is gear-reduced, the noise is extremely low, and it can be driven with 5V running smoothly..
  • Drive Module Board Size(in): 1.37*1.18*0.6.
  • Great packing in a box : 5 set Uln2003 Stepper Motor + Driver Board+Dupont Wire ..
Check Stock