Categories

Best D Ring Bumper

EAG Assembled Front Bumper with LED lights Compatible with 1999-2004 Grand Cherokee WJ

  • FITMENT - Fit for 1999-2004 Grand Cherokee WJ..
  • WINCH PLATE & D-RING SHACKLES - Built-in winch plate for up to 12,000lbs. winches. High strength D-ring mounts are welded on both inside and outside. Two 4.75 ton D-ring shackles and black isolator included..
  • LED LIGHTS - Two 12W LED Lights, integrated LED models and wiring harness included..
  • CONSTRUCTION - Use of laser-cutting, CNC folding and robotic assembly welder. Manufactured from durable 5/32" steel sheet. Textured black powder coat finish..
  • EASY INSTALLATION - EAG modular front bumper is engineered to be a direct bolt-on upgrade replacement for your vehicle original stock bumper reusing the factory mounting points..
Check Stock

Smittybilt 76651D-01 SRC Classic Rear Bumper

  • Fitment - Tioyar front & rear bumper combo fits for 1997-2006 Wrangler TJ (including: Freedom, Sports, Rubicon, Shahara)..
  • Front and rear bumper materials: 5/32 inch thick low carbon hard steel and 2 inch x 0.120 inch precision tolerance steel tube, with stronger bumper,....
  • Built-in led light design: beautiful and elegant. The front bumper is equipped with 2x20W LED aluminum lights+2x18W LED aluminum lights. The rear....
  • Front bumpers have two 4.75-ton high-strength D-ring mounting seats welded into the bumper. A total of 2x4.75T D-rings are provided. The maximum....
  • Easy to install without drilling or cutting. Follow the instructions to install!.
Check Stock

motormic Unique D Ring Shackles 2 Pack Orange - 3/4' Clevis with 7/8' Pin Safety Max 57,000 lbs Break Point - 2 Black Isolators, 8 Washers - Heavy Duty use Tow Strap, Winch, Off Road, Towing

  • New Innovative Design for D Ring Shackle: 3/4-Inches with 7/8 Inch Screw Pin and UNIQUE SAFETY CLIP to protect against LOSING AND ACCIDENTALLY UNSCREWING. Black Silicone Isolator to prevent scratching when mounted. The D shackle comes with 4 rubber washers for fit connection on the hitch receiver or on every bumper..
  • D Ring Made With Top Quality Materials - Heavy Duty D Ring x 2 made from Drop Forged Steel and Zinc Coating plated for corrosion resistance. MOTORMIC ORANGE D RING rated at 9,500 lbs./ 4.75-ton loading capacity for pulling or towing..
  • Set Of Two D Rings With Black Protection Sleeves: Silicone made, work as added bumper protection and reduce the noise when mounted on the vehicle. Black rubber washers added on shackels - prevent scratching on D RING SHACKLE and mounting while using..
  • Lifting Shackles Fitted For Both Professional and Home Towing: Tow hooks for truck, Motormic shackel works for emergency towing, rescue and tie downs, connects easily to any type of winch rope, snatch blocks and snatch straps..
  • Full Customer Support : We are always ready to answer any question and solve any situation very fast to fulfill even the highest expectations. MOTORMIC, YOU CAN COUNT ON US!.
Check Stock

EAG Full Width Front Bumper with LED Lights and Light Frames Fit for 76-86 Wrangler CJ

  • LED LIGHT AND LIGHT SURROUNDS - Two 12W LED lights included.EAG patent metallic gray ABS light surrounds included. Direct bolt-on design for secure rattle free installation..
  • WINCH PLATE & D-RING SHACKLES - Built-in winch plate for up to 12,000 lbs. winches. High strength D-ring mounts are welded on. NOTE: D-ring shackles are NOT included..
  • CONSTRUCTION - Use of laser-cutting, CNC folding and robotic assembly welder. Manufactured from durable 5/32" steel sheet and 2" x .120 wall steel tubing. Textured black powder coat finish..
  • EASY INSTALLATION - EAG front bumper is engineered to be a direct bolt-on upgrade replacement for your wrangler original stock bumper reusing the factory mounting points. No cutting or modifications required..
Check Stock

Hooke Road Wrangler TJ Bumper Combo Front + Rear Bumpers with D-Rings & Receiver Hitches Compatible with Jeep Wrangler TJ 1997-2006

  • Hooke Road Front Bumper + Rear Bumper Kit Fit for Jeep Wrangler TJ 1997-2006.
  • Two Stage Textured Black Powder Coat Finish.
  • High Strength D-Ring Mounts w/ D-Rings Included.
  • Front Bumper:D-Rings & 2x LED Accent Lights included.
  • Built-in winch plate for up to 12,000lb. winch.
  • 2 Year Hooke Road Manufacturer's Warranty & Life time customer support.
Check Stock

WARN 100770 Winch Accessory: Epic Sidewinder, Black

  • Sidewinder that replaces winch’s hook and shackle to provide faster, easier, more direct link to recovery point and rigging accessories.
  • Quickly attaches to most bumper recovery points, D-ring shackles, recovery straps, rope extensions, and soft shackles.
  • Directly attaches to bumper D-ring mount tabs with at least 1-3/8" clearance from face to center hole.
  • Body is made from ultra-durable forged 6061-T6 billet aluminum and is corrosion, impact, salt, weather, and UV-resistant.
  • Compatible for winches up to 18,000 lbs. with a minimum 64,000 lb. ultimate breaking strength.
Check Stock

WARN 100635 Winch Accessory Epic Sidewinder Gunmetal

  • Sidewinder that replaces winch’s hook and shackle to provide faster, easier, more direct link to recovery point and rigging accessories.
  • Quickly attaches to most bumper recovery points, D-ring shackles, recovery straps, rope extensions, and soft shackles.
  • Directly attaches to bumper D-ring mount tabs with at least 1-3/8" clearance from face to center hole.
  • Body is made from ultra-durable forged 6061-T6 billet aluminum and is corrosion, impact, salt, weather, and UV-resistant.
  • Compatible for winches up to 18,000 lbs. with a minimum 64,000 lb. ultimate breaking strength.
Check Stock

EAG Stinger Stubby Front Bumper with Winch Plate Fit for 1984-2001 Cherokee XJ/Comanche MJ

  • FITMENT - Compatible with 1984-2001 Cherokee XJ / 1984-2001 Comanche MJ.
  • STINGER BAR - This rock crawler bumper's benefit is the bolt-on stinger bar, which will help to prevent your Cherokee from flipping forward when coming down off an obstacle during hardcore off-roading. And it provides excellent protection for the grilles..
  • CONSTRUCTION - Use of laser-cutting, CNC folding, and robotic assembly welder. Manufactured from durable 5/32" steel sheet and 2" x .120 wall steel tubing. Textured black powder coat finish..
  • WINCH PLATE & D-RING SHACKLES - Built-in winch plate for up to 12,000 lbs. winches. High strength D-ring mounts are welded on. Two 4.75 ton D-ring shackles and black isolators included..
  • SIMPLE BOLT-ON INSTALLATION - EAG engineered this Cherokee stinger bumper to be a direct bolt-on replacement, no drilling or cutting required..
Check Stock

ECCPP Front and Rear Bumper Fit for 2007-2013 for Chevrolet Silverado 1500 Texture Black with D-ring & LED Lights & Winch Plate

  • [Perfect Fitment] 2007 2008 2009 2010 2011 2012 2013 for Chevy Silverado 1500.
  • [High Strength D-Ring Mounts] the D-Ring mounts are welded both inside and outside for extra strength,Perfect for Off-Road Protection..
  • [Heavy Duty Construction] The Rear bumper & front bumper are manufactured from durable 5/32" steel sheet and 2"X0.120" steel tubing.Include two 4.75....
  • [Front Bumpers Built in winch plate] for mounting winch which is more than 9,000Lbs.Built in safety catch for those uneven parking situations..
  • [Easy Installation] Designed to be a direct bolt-on aftermarket bumper using just basic hand tools, so there is no drilling or cutting required for....
Check Stock

Hooke Road Wrangler JK Front Bumper + Rear Bumper Combo w/All LED Lights Compatible with Jeep Wrangler JK & Unlimited 2007-2018 2/4 Doors

  • Fitment - Hooke Road front & rear bumper combo Compatible with Jeep Wrangler JK & Unlimited 2007-2018 2/4 Doors Sahara Rubicon Sport.
  • Winch Plate & Hitch Receiver & D-rings - Two solid D-ring shackle mounts are welded into bumpers from the inside and outside for increasing strength. 4.75 ton capacity D-rings (9500lb. rated) included. (Front Bumper) built-in winch plate for up to 12,000 lb. (winch not included). (Rear Bumper) built-in hitch receiver for up to 9500 lb..
  • Heavy Duty Construction & Corrosion Resistance Finish - The bumpers are manufactured from durable 1/8" steel sheet and 1.9"X0.06" steel tubing. Two stage finish using E-Coat pre-coating and high-grade textured black powder coating for long lasting corrosion resistance.
  • Easy Bolt-on Installation - Desiged to be a direct bolt-on aftermarket bumper using just basic hand tools, no drilling or cutting required for a clean straight forward installation. (Installation instruction included).
  • Package Include - 1 x wrangler jk front bumper.
Check Stock

Roadmaster 035 Tow Bar adapter for 3/4 Inch Bumpter Mounts (1 Pair)

  • Connects Roadmaster motorhome mounted tow bars to bumper mounts that are 3/4" thick.
  • Includes one pair of adapters with base pins.
  • Please confirm that the bumper manufacturer has approved the bumper for flat towing.
Check Stock

Hooke Road Cherokee XJ Metal Front Bumper and Rear Bumper Combo Compatible with Jeep Cherokee XJ 1984-2001

  • FITMENT: Full Width Front and Rear Bumper Kit Compatible with Jeep Cherokee XJ 1984-2001 Models. Moderate installation needs minor cutting to install front bumper...
  • DESIGN: The front bumper Integrated grille guard hoop provides superior protection..
  • EXTEA LIGHTING: 2×18W LED spotlights and 2×18W LED floodlights included..
  • CORROSION RESISTANCE: The bumpers were made of heavy duty 9-gauge(5/32 inch) steel. Textured black powder coat finished. Premium E-coating process for 5-year corrosion protection under normal use..
  • FOR OFFROAD: Front bumper has built-in winch plate for up to 12000 lbs use. Rear bumper has 2" standard hitch receiver. Include 4 D-rings and D-Ring isolators..
Check Stock

EAG Black Steel Front Bumper and Rear Bumper Combo 2PCS Fit for 1984-2001 Cherokee XJ

  • FITMENT - Compatible with 1984-2001 Cherokee XJ.
  • D-RING MOUNTS - Shackle mounts are welded onto the bumper from the inside and outside for maximum strength. D-ring shackles are not included..
  • REAR BUMPER - 2" Class 3 receiver hitch rated 5,000 lbs equipped with safety chain loops..
  • RUGGED CONSTRUCTION - Manufactured from durable 5/32" steel sheet and 1.65 " x .098 wall steel tubing. Textured black powder coat finish..
  • INSTALLATION - Directly bolt-on installation. Front Fender Trimming may be required for 1996 and earlier models..
Check Stock