Categories

Best Damaged Thread Removal Devices

Diamond Mortar Raking Bit,HIGHDRIL 5/16" x 1" (8mm x 25mm) 5/8-11 Thread Diamond Mortar Router for Old Mortar,Blown,Damaged Bricks or Natural Stone Removal

  • 1pc Diameter 8mm(5/16"),working length 25mm(1"),Grit 45/50,5/8-11 thread.
  • Use the 25mm long bit in preparation for repointing work and the longer 100mm bit for behind pipes or complete brick removal.
  • High quality diamonds with vacuum brazed technology,longer life, faster stock removal and less vibrations than tungsten routers.
  • Ideal for fitting air bricks or wall vents, removing old mortar prior to repointing or removing blown, damaged bricks or natural stone.
  • Machine:Angle grinders 5/8-11 thread,Ideal for both professional contractors and DIY users.
Check Stock

uxcell Metric Machine Tap M12X1.25mm H2 HSS Uncoated 4 Straight Flutes Thread Tapping DIY Tool 2pcs

  • Thread Size: M12X1.25mm. High-speed steel taps are with high hardness and toughness for wear resistance, well suited for general purpose applications..
  • Can make new threads or re-thread damaged or jammed threads. Uncoated taps feature just the base substrate without any additional coatings, and fit a wide range of applications..
  • Suitable for most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc.. Appropriate addition of coolant (e.g., water) can extend the service life when tapping..
  • Standard metric thread design, clear and tidy, provide rapid chip removal for efficient threading..
  • The taper taps can be applied for threading machine and electric drills, use to cut thread inside hole, creating a female surface which functions like a nut..
Check Stock

uxcell 5 Pairs Metric Hand Threading Tap Set M6 Thread 1mm Pitch Taper & Plug Milling Taps Straight Flutes High Speed Steel

  • Metric Taps: M6 x 1 metric taps set. Taper style: starts the thread square with the workpiece. Plug style: generally used in through holes..
  • Applications: The hand threading tap kit is used to re-thread damaged or jammed threads. Suitable for threading mild steels, aluminum, iron, copper, hard plastic..
  • Easy to Use: Hand tapping, mainly used with tap wrenches. Standard thread milling taps are used to thread through holes or shallow and blind holes..
  • Features: Straight flute design, downward chip removal. High speed steel tool is high hardness, high strength, good toughness, and wear resistance..
  • Tips: Add appropriate tapping oil for higher quality internal threads and more durable taps. Without any additional coatings, good for general purpose applications..
Check Stock

uxcell 5 Pairs Metric Hand Threading Tap Set M4 Thread 0.7mm Pitch Taper & Plug Milling Taps Straight Flutes High Speed Steel

  • Metric Taps: M4 x 0.7 metric taps set. Taper style: starts the thread square with the workpiece. Plug style: generally used in through holes..
  • Applications: The hand threading tap kit is used to re-thread damaged or jammed threads. Suitable for threading mild steels, aluminum, iron, copper, hard plastic..
  • Easy to Use: Hand tapping, mainly used with tap wrenches. Standard thread milling taps are used to thread through holes or shallow and blind holes..
  • Features: Straight flute design, downward chip removal. High speed steel tool is high hardness, high strength, good toughness, and wear resistance..
  • Tips: Add appropriate tapping oil for higher quality internal threads and more durable taps. Without any additional coatings, good for general purpose applications..
Check Stock

uxcell 5 Pairs Metric Hand Threading Tap Set M2 Thread 0.4mm Pitch Taper & Plug Milling Taps Straight Flutes High Speed Steel

  • Metric Taps: M2 x 0.4 metric taps set. Taper style: starts the thread square with the workpiece. Plug style: generally used in through holes..
  • Applications: The hand threading tap kit is used to re-thread damaged or jammed threads. Suitable for threading mild steels, aluminum, iron, copper, hard plastic..
  • Easy to Use: Hand tapping, mainly used with tap wrenches. Standard thread milling taps are used to thread through holes or shallow and blind holes..
  • Features: Straight flute design, downward chip removal. High speed steel tool is high hardness, high strength, good toughness, and wear resistance..
  • Tips: Add appropriate tapping oil for higher quality internal threads and more durable taps. Without any additional coatings, good for general purpose applications..
Check Stock

uxcell 5 Pairs Metric Hand Threading Tap Set M1.4 Thread 0.3mm Pitch Taper & Plug Milling Taps Straight Flutes High Speed Steel

  • Metric Taps: M1.4 x 0.3 metric taps set. Taper style: starts the thread square with the workpiece. Plug style: generally used in through holes..
  • Applications: The hand threading tap kit is used to re-thread damaged or jammed threads. Suitable for threading mild steels, aluminum, iron, copper, hard plastic..
  • Easy to Use: Hand tapping, mainly used with tap wrenches. Standard thread milling taps are used to thread through holes or shallow and blind holes..
  • Features: Straight flute design, downward chip removal. High speed steel tool is high hardness, high strength, good toughness, and wear resistance..
  • Tips: Add appropriate tapping oil for higher quality internal threads and more durable taps. Without any additional coatings, good for general purpose applications..
Check Stock

NPT Thread Forming Taps - 5 Pieces 1/8 1/4 3/8 1/2 3/4 Pipe Taps Set with Storage Box Drill Bits for Cleaning or Re-thread Damaged or Jam Pipe Threads High-speed Steel Material

  • High quality materials: If you need to clean or re-thread damaged or jammed pipe threads, look no further than our NPT Thread Forming Taps. This 5-piece set includes 1/8", 1/4", 3/8", 1/2", and 3/4" pipe taps, each made of high-speed steel material for durability and long-lasting use. Our taps are forged from composite steel (GCR15) material, hardened to a higher hardness (traditional 45# carbon steel hardness is 44.
  • 5 pcs NPT Pipe taps used for clean and or re-thread damaged or jam pipe threads, Cuts internal threads in pipes. It is used for the repair of rusted, broken and slippery threads of water pipe joints. They are available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP) and come in the following sizes: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, and 3/4" - 14 npt..
  • Nominal size of the tap is that of the pipe fitting being tapped. Our pipe taps feature a square universal chuck that can be used with either a manual wire twister or a tap machine, making them convenient and fast to use. The round shank with square end and straight flute tools allow chips to collect in the flutes as they cut, making them well-suited for most applications in shallow cuts..
Check Stock

Hegebeck Thread Milling 3/8-16 Thread Taps Extrusion Taps H2 Thread Drill Thread Milling Plug for Manual Equipment Special Processing Consoles 1 Pcs

  • Thread Size: M4 x 0.7mm. High-speed steel taps are with high hardness and toughness for wear resistance, well suited for general purpose applications..
  • Can make new threads or re-thread damaged or jammed threads. Ti-coated taps provide capability, durability and long service life. Fits a wide range of applications..
  • Suitable for most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc.. Appropriate addition of coolant (e.g., water) can extend the service life when tapping..
  • Standard metric thread design, clear and tidy, provide rapid chip removal for efficient threading..
  • The mini metric taps are mainly used for clocks, watches, low hardness wood and soft metal hole processing..
Check Stock

Whitecap Industries G-3460SSC Stainless Steel Gas Spring - 12\ to 20\

  • 【Material】 - M8 thread is made of PA66A5,simple design, good quality, durable..
  • 【Feature】 - Gas spring strut joint connector end fitting..
  • 【Advantage】 - Gas spring end fitting connector can be used over and over again,easy removal..
  • 【Application】 - Gas spring end fitting connector is a good replacement of gas springs ball strut, and the gas springs are ideal motion control devices for lifting, holding, counterbalancing, and providing support for applications such as horizontally hinged doors, lids, hoods and canopies..
Check Stock

6mm x 0.75 Metric Taper and Plug Tap Right Hand Thread M6 x 0.75mm Pitch

  • ...ndicular to each other and tapping smoothly. It also has a smoothing effect on the thread (removes burrs). Suitable for thick steel, rubber, aluminum, copper, and wood..
  • Good Helper: Standard metric thread design, clear and tidy, provide rapid chip removal for efficient threading. Can make new threads or re‑thread damaged or jammed threads.Number Of Threads: 3. Thread Tolerance Grade: 0.014. Through Hole/Blind Hole: Through Hole. Material: High speed steel. Tap Style: Straight groove. Thread Code: Standard thread..
  • Suitable for: Suitable for most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc. Appropriate addition of coolant (e.g. water) can extend the service life when tapping..
  • Replacement for: The mini metric taps are mainly used for clocks, watches, low hardness wood and soft metal hole processing. Mainly used for hand use, tapping the vast majority of materials in through holed conditions..
Check Stock

EWK 5 Pcs Metric Lug Nut & Bolt Remover Extractor Twist Socket Set with Drift Punch Bar

  • 【 Wide Applications 】 EWK 5 Pcs Twist Socket Set meets a wide range of deep stubborn lug nut removal needs. Including 4 different twist sockets:....
  • 【 Tight Grip and Bite 】 Lug nut remover has plum-shaped internal thread to extract any heavily stripped nuts. The Spiral teeth provides excellent....
  • 【 Easy Removal 】 Simply use a hammer to hit the lug nut extractor socket onto the damaged nut, then select a 1/2 inch square hand tools to loosen....
  • 【 Quality Material 】 Made of high hardness CR-MO steel for superior durability. These broken bolt extractors have black oxide surface, enables....
  • 【 Excellent Support 】 Service and Quality guaranteed! EWK provides you premium quality tools with 12 months warranty. If there is any problem or....
Check Stock

Left Hand Drill Bit Set (10 pc, Silver & Gold), Metal Extractor Bits to Remove Stripped Broken Screws & Bolts w/Iron Storage Case by Mata1

  • HEAVY DUTY REMOVAL SET – These left-handed reverse twist extractors are USA-designed with clean steel technology, HSS strength & high HRC hardness.
  • Suitable for removing hardened, damaged, rusted & painted-over screws or bolts.
  • HARD & TOUGH – The hex shank extraction bits range in diameter from 3/32″ to 5/8″, while the lefthand drill bits range in diameter from 5/64″ to 19/64″ with 118-degree split points for high-speed drilling.
  • CARRY CASE – Ideal tool box to organize & hold the remover drill bits for any craftsman, dad, husband, boyfriend, or wife.
  • DRILL & REMOVE – Select bit size appropriate to the damaged screw/bolt.
  • Insert left-hand drill bit into drill & set drill to reverse.
  • Drill a hole about 1/16” deep into the screw/bolt.
  • Select corresponding extractor & use a mallet/hammer to pound it into the screw/bolt.
  • Use drill, wrench, or tap handle to thread the screw bolt out.
  • HANDY GADGETS – Mata1 is committed to provide lasting quality tools.
  • Mata1 reversible drill bit sets provide an assortment of sizes for removal of stuck bolts & screws.
Check Stock

ABN Spark Plug Thread Repair Kit, 14mm Reamer Cylinder Thread Repair Tool & Thread Insert – Spark Plug Rethreader Kit

  • REPAIR PLUGS: The ABN Thread Repair Tool Kit is a time-saving kit that allows you to cut threads to fix a stripped and damaged 14mm spark plug threaded hole port and repair plug configurations in aluminum heads.
  • Socket includes metal retainers to keep plug held inside during install and removal.
  • VARIOUS APPLICATIONS: Chrome-vanadium steel (CR-V) M14 x 1.25 internal thread size on repair sleeve suitable for damaged spark plug threads to clean and rethread spark plug ports on a BMW vehicle and some Nissan and Toyota engines.
  • As long as the head is aluminum and the spark plug hole is straight with room to turn the tap using either a ratchet or wrench, this kit will allow you to repair plugs without removing the head.
  • EASY TO USE: Rotate the crankshaft to make sure no ports/valves are open, use the tap to install new threads, choose the proper depth of insert, and screw it firmly into the newly tapped head.
  • Apply grease on the tap to help catch any metal shavings (rather than letting them drop into the cylinder) and back out the tap out every half turn to every whole turn to clean the metal shavings from the tap.
  • PERFECT SIZE: 14mm reamer with 12 points.
Check Stock