Categories

Best Damascus Blank

Knife Blanks 015 12" Overall Bowie Fighter Knife Blade

  • HANDMADE DAMASCUS STEEL FLINT KNAPPED FINISH HAMMER FORGED PATTERN WELDED DAMASCUS STEEL ROCK PATTERN BLANK BLADE FIXED BLADE FOR KNIFE MAKING WITH BRASS GUARD.
  • THIS UNIQUE FORGED BLANK BLADE IS TOTALLY HAND MADE .BLADE IS HAND FORGED "PATTERN WELDED" DAMASCUS MULTIPLE LAYERS WITH ABOVE 176LAYERS OF 1095 AND 15 N 20 HIGH & LOW CARBON TOOL STEELS.
  • OVERALL LENGTH 13 INCH *BLADE LENGTH 8 INCH, BLADE THICKNESS, 5 MM.
  • DAMASCUS STEEL BLADES KNIVES REQUIRE SPECIAL CARE. WHEN NOT IN USE, STORE KNIVES AND LEATHER SHEATHS SEPARATELY BECAUSE LEATHER DOES ABSORB MOISTURE AND CAN RUST YOUR BLADE.
  • AGE RESTRICTION: WE DON’T SELL KNIVES TO ANY ONE WHO IS UNDER AGE 18.
Check Stock

Whole Earth Supply Extra Large - Raindrop Damascus Tracker Blank Blade Knives Knife Making Blanks

  • Overall 11 inches Long hand forged full tang Damascus steel tracker knife blank blade.
  • 6 inches long cutting edge. Up to standard Tracker and camping Knife blank blade.
  • 4.5" long Scale space with 3 Pin holes for extra strength of scale..
  • Approximately 5 mm Thick fire pattern Damascus steel clip point blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and low....
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
Check Stock

ColdLand |13.00

  • You have a knife project and you are looking for a blank blade? Look no further, we have made a hand forged Damascus blank blade for you..
  • Solidly built for tough use. Long lasting sharp edge. Hand forged by using 1095 & 15N20 steels. Over 260 true layers of Damascus steel. Heat treated. Hardness: 58-60 HRC on Rockwell Scale. Will long last for several years (lifetime if handled with care)..
  • NOTE: This is our stock photo. You will receive different Damascus pattern as every Damascus Blade is unique in the world. The holes in the handle can be small or big in diameter and can be found at different places on the handle (you dont need to use all holes to make a knife). TIP: If your pins are bigger than handle holes, you can rub pins with sandpaper to adjust according to handle holes..
  • DIMENSION: See photos for Dimensions. We dont provide any directions on how to make a knife. You can search on the web i.e., how to make a knife from a blank blade..
  • We recommend to dry your new leather sheath under direct sunlight for several hours before putting your knife in it as leather contains moisture and can rust your knife. Wash your knife and apply a thin layer of oil on your blade/knife after each use. For long term storage.
  • store your knife and sheath separately. ....
Check Stock

Whole Earth Supply Damascus Knife Blank Making Skinning Skinner Hunting 1095 High Carbon Blade

  • Large Upswept Skinner/Skinning Damascus Blank.
  • Dimensions: 9 inches Approximate Overall Length, 4 1/2 inches Approximate Blade Length, 4 1/2 inches Approximate Handle Length, 1 1/2 inches Widest Part of Blank, Approximately 4mm Thick (1/8 inch).
  • High Quality Damascus Construction: 1095 High Carbon and 15n20 nickel (Over 200 Layers).
  • Blade comes sharpened. A final edge may be applied for an even sharper razor edge..
Check Stock

Handmade Damascus Steel Hunting Skinner Knife Blank Blade Fire Storm Pattern 9 Inches VK2170

  • BRAND NEW 09.50 INCHES HANDMADE DAMASCUS FULL TANG SKINNER KNIFE BLANK BLADE . FIRE STORM PATTERN DAMASCUS STEEL BLADE (1095 / 15N20) ..
  • OVER ALL LENGTH = 09.50 Inches . HANDLE LENGTH 4.50 INCHES . BLADE LENGTH = 5.00 INCHES , THICKNESS = 4.5 mm.
  • Sharp and Hard cutting edge forged damascus steel Blank Blade.
  • precise pattern , quality forge perfect balance and nice grip.
Check Stock

Whole Earth Supply 1095 High Carbon Steel Drop Point Knife Blank Blade Hunting Skinning Skinner 1095HC

  • 9 inches Approximate Overall Length, 4 inches Approximate Blade Length, 4.5 inches Approximate Handle Length, 1 1/4 inches Widest Part of Blank, 4mm....
  • High Quality Damascus Construction: 1095 High Carbon and 15n20 nickel (Over 200 Layers).
  • Blade comes sharpened. A final edge may be applied for an even sharper razor edge..
Check Stock

ColdLand Knives Knife Blank Blade Tactical 11' for Hunting Making Supplies Hand Forged by NB128, grey

  • You have a knife project and you are looking for a blank blade? Look no further, we have made a hand forged Damascus blank blade for you..
  • Solidly built for tough use. Long lasting sharp edge. Hand forged by using 1095 & 15N20 steels. Over 260 true layers of Damascus steel. Heat treated. Hardness: 58-60 HRC on Rockwell Scale. Will long last for several years (lifetime if handled with care)..
  • NOTE: This is our stock photo. You will receive different Damascus pattern as every Damascus Blade is unique in the world. The holes in the handle can be small or big in diameter and can be found at different places on the handle (you don’t need to use all holes to make a knife). TIP: If your pins are bigger than handle holes, you can rub pins with sandpaper to adjust according to handle holes..
  • DIMENSION: See photos for Dimensions. We don’t provide any directions on how to make a knife. You can search on the web i.e., “how to make a knife from a blank blade”..
  • Money back guarantee. Just message us in case of any issue and we'll take great care of you..
Check Stock

ColdLand |9.25 Hand Forged Damascus Steel Blank Blade for Knife Making Supplies NB24

  • You have a knife project and you are looking for a blank blade? Look no further, we have made a hand forged Damascus blank blade for you..
  • Solidly built for tough use. Long lasting sharp edge. Hand forged by using 1095 & 15N20 steels. Over 260 true layers of Damascus steel. Heat treated.....
  • NOTE: This is our stock photo. You will receive different Damascus pattern as every Damascus Blade is unique in the world. The holes in the handle can....
  • DIMENSION: See photos for Dimensions. We don’t provide any directions on how to make a knife. You can search on the web i.e., “how to make a knife....
  • We recommend to dry your new leather sheath under direct sunlight for several hours before putting your knife in it as leather contains moisture and....
Check Stock

ColdLand | 8.50 Hand Forged Damascus Steel Blank Blade for Knife Making Supplies SB117

  • You have a knife project and you are looking for a blank blade? Look no further, we have made a hand forged Damascus blank blade for you..
  • Solidly built for tough use. Long lasting sharp edge. Hand forged by using 1095 & 15N20 steels. Over 260 true layers of Damascus steel. Heat treated.....
  • NOTE: This is our stock photo. You will receive different Damascus pattern as every Damascus Blade is unique in the world. The holes in the handle can....
  • DIMENSION: See photos for Dimensions. We don’t provide any directions on how to make a knife. You can search on the web i.e., “how to make a knife....
  • We recommend to dry your new leather sheath under direct sunlight for several hours before putting your knife in it as leather contains moisture and....
Check Stock

ColdLand |8.00 Hand Forged Damascus Steel Blank Blade for Knife Making Supplies NB42

  • You have a knife project and you are looking for a blank blade? Look no further, we have made a hand forged Damascus blank blade for you..
  • Solidly built for tough use. Long lasting sharp edge. Hand forged by using 1095 & 15N20 steels. Over 260 true layers of Damascus steel. Heat treated.....
  • NOTE: This is our stock photo. You will receive different Damascus pattern as every Damascus Blade is unique in the world. The holes in the handle can....
  • DIMENSION: See photos for Dimensions. We don’t provide any directions on how to make a knife. You can search on the web i.e., “how to make a knife....
  • We recommend to dry your new leather sheath under direct sunlight for several hours before putting your knife in it as leather contains moisture and....
Check Stock

ColdLand |8.50 Hand Forged Damascus Steel Blank Blade with Bolster for Knife Making Supplies NB38

  • You have a knife project and you are looking for a blank blade? Look no further, we have made a hand forged Damascus blank blade for you..
  • Solidly built for tough use. Long lasting sharp edge. Hand forged by using 1095 & 15N20 steels. Over 260 true layers of Damascus steel. Heat treated.....
  • NOTE: This is our stock photo. You will receive different Damascus pattern as every Damascus Blade is unique in the world. The holes in the handle can....
  • DIMENSION: See photos for Dimensions. We don’t provide any directions on how to make a knife. You can search on the web i.e., “how to make a knife....
  • We recommend to dry your new leather sheath under direct sunlight for several hours before putting your knife in it as leather contains moisture and....
Check Stock

ColdLand Knives Damascus Blank Blade Dagger Hand Forged 13.00 inches for Hunting Knife Making Supplies ZB100

  • You have a knife project and you are looking for a blank blade? Look no further, we have made a hand forged Damascus blank blade for you..
  • Solidly built for tough use. Long lasting sharp edge. Hand forged by using 1095 & 15N20 steels. Over 260 true layers of Damascus steel. Heat treated.....
  • NOTE: This is our stock photo. You will receive different Damascus pattern as every Damascus Blade is unique in the world. The holes in the handle can....
  • DIMENSION: See photos for Dimensions. We don’t provide any directions on how to make a knife. You can search on the web i.e., “how to make a knife....
  • We recommend to dry your new leather sheath under direct sunlight for several hours before putting your knife in it as leather contains moisture and....
Check Stock

ColdLand Knives Damascus Blank Blade Dagger Hand Forged 10.00 inches for Hunting Knife Making Supplies HSMB02

  • You have a knife project and you are looking for a blank blade? Look no further, we have made a hand forged Damascus blank blade for you..
  • Solidly built for tough use. Long lasting sharp edge. Hand forged by using 1095 & 15N20 steels. Over 260 true layers of Damascus steel. Heat treated.....
  • NOTE: This is our stock photo. You will receive different Damascus pattern as every Damascus Blade is unique in the world. The holes in the handle can....
  • DIMENSION: See photos for Dimensions. We don’t provide any directions on how to make a knife. You can search on the web i.e., “how to make a knife....
  • We recommend to dry your new leather sheath under direct sunlight for several hours before putting your knife in it as leather contains moisture and....
Check Stock