JSP Manufacturing UFP Plastic Outer Member Cap 2-1/2 inch Diameter 32547 fits A60 A70 A84 A75 (1)
- Brand New UFP Plastic Outer Member Cap ~ 1 Pack.
- Replaces UFP Part #: 32547 ~ Replacement black plastic outer member housing cap.
- Covers the access hole to the actuators master cylinder reservoir plug ~ Twist-Lock design, locks into place with a simple clockwise turn.
- Standard issue cap works with UFP Brake Actuators ~ Compatible with Trailer Buddy UFP Brake Actuators.
- Fits: A-60, A-70, A-75, A-84 series UFP Brake Acuators ~ Made in USA!.
Check StockEvinrude Diagnostic kit + EvDiag
- Reading and resetting the fault code(s)..
- Reading sensors and actuators in real time..
- Tests sensors and actuators in real time..
- Generating the graphics of engine operation..
Check StockTENGWUMA Tailgate Damper Kit Fits For F150 2015 2016 2017 2018 2019 FL3Z-99406A10-A FL3Z99406A10A
- Compatibility:This Tailgate Assist Damper Fits For F150 2015 2016 2017 2018 2019 OE:FL3Z-99406A10-A FL3Z99406A10A..
- Security and protection:TENGWUMA Tailgate Assist Shock Protect Your Families From Tailgate Slamming Down,and The Tailgate Damper Kit Falls Safely and Slowly Without any Slamming Sounds Anymore..
- Material:Tailgate damper is made of high-quality steel material.This assist shock kit tested and durable, corrosion-resistant and rattle-free..
- Install:Tailgate Damper can be replaced directly with original parts in your vehicle and installed easily without using complicated tools,Just need to remove your original Tailgate Damper Kit and easy to Tailgate Assist Damper install..
- Ensure Fit - To make sure this tailgate damper kit fits your exact vehicle,input your make,model and trim level into the amazon garage..
Check Stock
YARDMARIS Winch Cable Damper,Winch Damper Safty Recovery Dampener with Reflective Strips for Off-Road Safty Blanket
- Great Tool for a Stuck Vehicle–If your SUV got stuck in a heavy snow,muddy road or rugged mountain road,you can rely on this winch damper to get out of sticky stituation..
- Reduce Risk of Injury–Should recovery strap breaks,it will snap back and strong energy will hurt you.Winch cable damper is recommended as it can reduce damage by weighing down the broken strap and absorbing the strong energy..
- Heavy Duty Fabric Helps Winch Line Damper Weigh 2.2 Pounds–It is a dependable winch rope damper because right side of fabric is dacron that helps the bag not bend easily.
- the wrong side of fabric is PVC that acts as a shock absorber.Together, fabric is firmer and heavier than other ones,which makes total weight of winch damper meet needs of 4×4 racing competition..
- Reflective Strip for Enhanced Visibility–14×1.5 inch reflective strips front and back make winch damper bag more obvious to other drivers to avoid accidents..
- Pocket For Storage & Weight Gain–A large pocket is designed to store accessories for emergency or put anything in the winch rope damper that can gain weight to increase safety..
Check StockLinear Actuator Controller - Hall Effect for Synchronized Control - 30A - Wireless Remote Control kit for 24VDC Electric actuators
- DUAL-CHANNEL - Connect up to 2x matching electric linear actuators with Hall effect feedback.
- SYNCHRONIZED MOVEMENT - Actuators with Hall effect feedback allows for synchronized movement, ensuring accurate positions and even travel.
- COMPATIBILITY - With a current rating of 30A, this control system is easy to use with a variety of 12v devices with hall effect feedback with 15A per channel.
Check StockSTOP BOX AR-15 Chamber Lock - Red
- Secure, Quick, & Reliable Access When You Need It Most - Specifically designed rapid access finger code lock to prevent tampering and quick access to others while your gun is at the ready.
- No batteries, electronics, or keys needed - The AR-15 Chamber Lock uses five actuators located on the corner of the enclosure for fast and easy indexing. Your hand creates the key that positions these actuators in the correct alignment to unlock the chamber lock.
- 100% Satisfaction Guaranteed and Lifetime Warranty - If you're not satisfied for any reason, you may return your order for a full refund within 30 days.
- Made in the USA - Made from 6061 T6 Aluminum with Type II and Type III Hard Anodized allowing it to be extremely lightweight and durable.
Check Stock
Lucky Seven FL3Z-99406A10-A fit for Ford Tailgate Shock Assembly,FL3Z99406A10A for 2015-2019 Ford F-150
- FL3Z-99406A10-A fit for Ford Tailgate Shock Assembly,REPLACeS PART# FL3Z-99406A10-A, FL3Z99406A10A - This tailgate damper kit can be installed easily in the passenger side and will require you to remove two T50 bolts to remove and replace the roller. The damper shock or strut installs behind the passenger tail light and the angled part of the damper shock snaps into the mount from the bed while the straight part mounts into the new roller that came with the kit..
- FL3Z-99406A10-A/,fl3z-99406a10-a tailgate shock assembly,This tailgate shock is precisely engineering designed with integrated shock absorber, which works with the existing tailgate cables to facilitate a slow, consistent and smooth lowering.2015 2016 2017 2018 2019 Ford F150. The tailgate shock assembly has went through extensive testing, means you will get a fairly reliable gate damper to control the drop rate of the gate to prevent harm to the vehicle body..
- Fl3z-99406a10-a oem for 2015 - 2019 Ford F150 including Raptor Models with years 2017 and 2019 |. Having a tailgate assist when opening is a nice thing. Although some of the Ford F-150s came with it as a factory option. Most did not. This kit installs seamlessly and hidden behind the tail lights,REPLACEMENT TAILGATE DAMPE....
Check Stock
Suncourt ZoneMaster Fully Adjustable Motorized Airflow Control Zone Damper, UL Listed 24VAC/20VA Plug-in Transformer Included, Compatible with Any 24 Volt Thermostat, Normally Open – 6', Silver
- ECONOMIC SOLUTION –Protect your comfort & your wallet by limiting heating and cooling expenses in your space. This cost-efficient zone damper limits the need for excessive HVAC use and keeps your heating and air conditioning costs low over time. With a 3-year manufacturer’s warranty, this zone damper is built tokeep you comfortable year after year..
- TOTAL ZONE CONTROL –This ZoneMaster gives you complete individual control over the climate in your space. Customize and maintain the temperature in specific rooms of your home with these zone dampers. Easily integrate it with an existing zone controller system!.
- FRESH AIR INTAKE – Improve the quality of air in your home by installing a fresh air intake system with a Suncourt motorized airflow damper. Once damper is closed, it will block drafts, airflow and odors from flowing through. Suncourt’s dampers boast a patent-pending coupler with 0°- 90°adjustment capabilities, making them perfect for fresh air intake applications..
- ENERGY EFFICIENT DESIGN – Take control of your comfort and preserve energy by using these automated duct dampers. When power is not supplied, the damper stays open allowing for air to flow through..
- UL LISTED 24 VAC TRANSFORMER INCLUDED - Simple and user-friendly, this damper....
Check Stock
Tailgate Damper Kit - Compatible with Ford F-150 2015, 2016, 2017, 2018, 2019, F-150 Raptor 2017-2019 - Replaces FL3Z-99406A10-A, FL3Z99406A10A - Tail gate Assist Shock Strut - Lift Support Kit
- Replacement Tailgate Damper Kit - This is a replacement for the tailgate damper accessory kit. The tail gate even being made of aluminum is really heavy especially when installed with more accessories like the tailgate step resulting to the tailgate dropping right out of the hands when opening. This kit safely lowers the tailgate in a slow and controlled manner..
- Compatible Replacement for Ford F150 - 2015 - 2019 F150 including Raptor Models with years 2017 and 2019 |. Having a tailgate assist when opening is a nice thing. Although some of the F-150s came with it as a factory option. Most did not. This kit installs seamlessly and hidden behind the tail lights..
- Replaces Part# FL3Z-99406A10-A, FL3Z99406A10A - This tailgate damper kit can be installed easily in the passenger side and will require you to remove two T50 bolts to remove and replace the roller. The damper shock or strut installs behind the passenger tail light and the angled part of the damper shock snaps into the mount from the bed while the straight part mounts into the new roller that came with the kit..
- OEM Fit, Quality, Finish - While this is not a genuine OEM part, it is a direct replacement for the factory tailgate damper kit. Ensure that the tailgate harness under the t....
Check StockDuct Outlet 6\ Damper Sleeve w/ 1.5\ Stand-Off, 3/8\ Rod HVAC
- 6" Damper Sleeve w/ 1.5" Stand-Off, 3/8" Rod HVAC.
- 1½” Stand-Off for the locking Damper Handle.
- 20 Gauge Galvanized Damper Blade with 3/8" Rod.
- Crimped on one end to fit inside next ducting section.
Check StockAssault Racing Products 8000170 7.5\ LT-1 Chevy Harmonic Damper LT1
- Self-adhesive strip adheres to the Crank Vibration Damper.
- Spark advance up to 60 Degree instead of only 10 Degree-15 Degree as on chain case timing tab.
- Genuine Mopar Performance P4529070AB Damper Degree Timing Tape.
Check StockWindyNation Linear Actuator or DC Motor Power Supply + DPDT Wireless Remote Control Switch + Double Adapter Cable
- Includes Power Supply, Remote Control Unit, Double Adapter Cable (for connecting two linear actuators or DC motors), and additional Connection Cables.
- Can wirelessly control two 12 volt DC Motors or two linear actuators (5 amps maximum). The remote control is a DPDT switch (Examples: Up-Stop-Down or....
- Power Supply Specs: AC INPUT RANGE: 100-240 VAC DC OUTOUT: 12 VDC (5 amps maximum) ADDITIONAL INFO: 8ft AC extension cord included and 5ft DC....
- Remote Specs: POWER RATING: 5 amps REMOTE RANGE: 90ft maximum FREQUENCY: 433.92 Mhz OPERATING CURRENT: 15mA SWITCH TYPE: DPDT ON-OFF-ON.
- Simple Installation: The included connectors allow for a quick and simple installation of the power supply and remote receiver..
Check StockWindyNation 2pcs 12 Volt 225 lbs Linear Actuators + Wireless Remote Control DPDT Switch + Actuator Mounting Brackets + Wiring & Connectors
- Includes 2pcs of 12V, 225 lbs Linear Actuators (multiple stroke lengths available) with Mounting Brackets, Remote Control Unit, and Wire with Locking....
- No power supply is included. This option is ideal for customers who already have their own power supply (e.g. 12 volt car battery ).
- See photo gallery for linear actuator specifications and a wiring schematic for the entire system. Extremely easy to wire and assemble using the....
- Remote Specs: CURRENT RATING: 5 amps REMOTE RANGE: 90ft maximum FREQUENCY: 433.92 Mhz OPERATING VOLTAGE: 10-30 vdc (suitable for 12 and 24 volt....
- Complete kit allows end user to remotely control the movement of their linear actuators. (Power supply is NOT included. Other variations in this....
Check Stock
