Categories

Best Danco Hyr460

Toilet Economizer Dragon de Agua | 40% EcoFriendly Water Saver

  • WATER-SAVING DUAL FLUSH TOILET REPAIR KIT: Converts a standard toilet into a dual flush toilet that saves water by reducing the amount of water used with each flush. The HYR451T combines two products that together will increase your toilet’s efficiency: HYR271 Dual Flush Converter and HC630 HydroClean fill valve.
  • COMPATIBILITY: The Dual Flush Converter works with standard 2 in. flush valves and requires a 10-inch minimum clearance from highest point of the flush valve opening to the inside of the tank lid. NOT COMPATIBLE WITH MANSFIELD TOILETS..
  • FLUSH VALVE REPLACeMENT INSTALLATION TIP: Be sure to place the Dual Flush Converter directly in the center of your existing flush valve.
  • IMPORTANT INSTALLATION TIP: Do not remove overflow tube and flush valve from toilet tank.
  • the Dual Flush Converter is a replacement to the existing flapper.
  • slide the blue silicone dome gasket down the overflow tube, seating the gasket into the flush valve.
  • ELIMINATES TOILET LEAKS: Eliminates common leaky toilet problems due to a worn-out flapper, handle or faulty flapper chain.
  • the permafit silicone seal is also chlorine and chemical resistant and will not warp.
Check Stock

Danco 10004 Trim Kit, for Use with Delta Tub and Shower Faucets, Plastic, Brushed Nickel

  • DELTA TUB/SHOWER TRIM KIT REPLACEMENT replaces 1300/1400 Delta Monitor series, MultiChoice 13/14 series and Delta 600 series with and without a push button diverter.
  • COMPATIBILE WITH CARTRIGE STYLE SHOWER FAUCETS: Fits Delta Monitor 1300/1400 series cartridge OEM# RP 198804 (Danco Model # 10347) and MultiChoice 13/14 series cartridge OEM# RP46074 (Danco Model # 10664).
  • COMPATIBILE WITH BALL STYLE SHOWER FAUCETS: Fits Delta Monitor 600 series Delta 70 ball OEM# RP770 (Danco Model # 88119) and Delta 212 ball OEM# RP212 (Danco Model # 88120) and will fit Delta Shower Valve with and without push button diverter.
  • IMPORTANT INSTALLATION TIP: To properly install this product, you need a minimum of a 3-1/2 inch opening in the wall for the offset portion of the trim plate to sit back in to ensure it sets flush to the wall.The tabs on the faceplate insert will align with the slots on the faceplate.
  • BILT 3D INTERACTIVE INSTRUCTIONS download is a revolutionary way to assemble & install products with voice & text guided directions and step-by-step self-paced instructions to help you finish your install quickly & efficiently, with the confidence you’ve done it right!.
  • SHOWER TRIM KIT INCLUDES: (1) metal lever handle (1) clear acrylic handle, faceplate trim, screws, a....
Check Stock

Danco 10896A | Disposal Genie II Garbage Disposal Strainer and Stopper Kitchen Sink Drain Splash Guard with Food Scraper Gray 1-Pack

  • GARBAGE DISPOSAL DRAIN PROTECTION – The Disposal Genie II design prevents silverware, jewelry and other non-food related items from slipping down....
  • KITCHEN SINK STOPPER & STRAINER – The Danco Disposal Genie II newest innovation is the stopper capability. The topper of the Disposal Genie II....
  • SPLASH GUARD – The Danco Disposal Genie II has a 5-inch height allowing it to remain in the sink drain opening while running the garbage disposal..
  • FOOD SCRAPER – The silicone food scraper tool can be used to safely clean dishes and push leftover food off of plates or other dishware into the....
  • DISHWASHER SAFE – The Danco Disposal Genie II is constructed of tough, durable and dishwasher-safe material for easy clean..
Check Stock

Danco HYR451T HyrdroRight Universal Water-Saving Toilet Repair Kit with Dual Flush Valve, Lever Handle, White

  • ...er at end is the Full Flush that uses the normal amount of water for solids..
  • COMPATIBILITY: The Dual Flush Converter works with standard 2 in. flush valves and requires a 10-inch minimum clearance from highest point of the flush valve opening to the inside of the tank lid. NOT COMPATIBLE WITH MANSFIELD TOILETS. The HYR451T combines two products that together will increase your toilet's efficiency: HYR271 Dual Flush Converter and HC630 HydroClean fill valve..
  • HASSLE-FREE INSTALLATION: Drop-in installation without tools in 5 to 10 minutes - tank removal not required..
  • IMPORTANT INSTALLATION TIP: Do not remove overflow tube and flush valve from toilet tank.
  • the Dual Flush Converter is a replacement to the existing flapper.
  • slide the blue silicone dome gasket down the overflow tube, seating the gasket into the flush valve..
  • DETECTS LEAKS & WATER ADJUSTMENT CALIBRATION: Detects leaks and signals when a leak is found. The Total Repair Kit also can be calibrated to adjust the exact amount of water needed which saves water..
Check Stock

Danco HYR460 Hydroright HyrdroRight Universal Water-Saving Toilet Repair Kit with Dual Flush Valve, Push Btton Handle, White

  • ...ton at end is the Full Flush that uses the normal amount of water for solids.
  • COMPATIBILITY: The Dual Flush Converter works with standard 2 in. flush valves and requires a 10-inch minimum clearance from highest point of the flush valve opening to the inside of the tank lid. NOT COMPATIBLE WITH MANSFIELD TOILETS. The HYR451T combines two products that together will increase your toilet’s efficiency: HYR271 Dual Flush Converter and HC630 HydroClean fill valve.
  • HASSLE-FREE INSTALLATION: Drop-in installation without tools in 5 to 10 minutes – tank removal not required.
  • IMPORTANT INSTALLATION TIP: Do not remove overflow tube and flush valve from toilet tank.
  • the Dual Flush Converter is a replacement to the existing flapper.
  • slide the blue silicone dome gasket down the overflow tube, seating the gasket into the flush valve.
  • DETECTS LEAKS & WATER ADJUSTMENT CALIBRATION: Detects leaks and signals when a leak is found. The Total Repair Kit also can be calibrated to adjust the exact amount of water needed which saves water..
Check Stock

Danco 1 in. OD x 3/4 in. ID, Rubber, #15 O-Ring, 10 per Card, 96732

  • O-Ring Dimensions: 1 in. OD x 3/4 in. ID x 1/8 in. wall thickness.
  • Danco O-Ring #15: Compatible with Kohler, American Standard, Speakman and Symmons faucets.
  • These tough, pliable Buna-Nitrile Rubber (NBR) O-Rings help eliminate leaks, prevent faucet drips and provide long-term use for your plumbing needs.
  • O-rings have high abrasive and a high level of tempature resistance that will withstand heat between a temperature range of 86°F to 248°F (-30°C to 120°C).
  • Danco o-rings are widely used by plumbeing proffesionals and DIY homeowners alike to prevent plumbing issues.
  • Includes 10 O-Rings per bag for faucet repair.
Check Stock

Danco 10306, Tub/Drain Protector Hair Cather and Strainer, Hair Drain Clog Prevention Drain Snake, Snare and Auger

  • PREVENT CLOGGED DRAINS and slow water drainage with the Danco Tub Hair Catcher, unlike “in drain” hair catchers that are smelly and gross to clean, our hair catcher conveniently sits on top of the bathtub drain and acts as a drain strainer & cover to keep drains clear of hair and debris, eliminating clogs from hair clogs and soap scum build-up..
  • BEST OVERALL INNOVATIVE DRAIN PROTECTOR & CLOG PREVENTION with a flower shape equipped with unique tiny pegs that catches and traps unwanted hair and debris along the silicone petals to catch hair before heading down the drain and protect the drain from getting clogged..
  • STOP CLEANING SMELLY, GUNKY & GROSS “IN-DRAIN” HAIR CATHERS! The Danco Tub Hair Catcher SITS ON TOP OF THE BATHTUB DRAIN so it’s EASY TO CLEAN with the convenient basket handle that acts as a finger lift allowing for easy removal, and cleaning.
  • UNIVERSAL STYLE AND FIT designed to fit BATHTUB DRAINS up to a diameter of 4. 5 inches wide and is super convenient and easy to use..
  • WHITE FINISH has a classic style and blends nicely with most bathtubs and existing fixtures..
  • FEATURES EASY INSTALLATION that does not require any tools and fits most standard tub drains. The convenient basket strainer acts a....
Check Stock

Danco 1-1/4 in. OD x 1 in. ID, Rubber, #19 O-Ring, 20 per bag, 35736W

  • O-Ring Dimensions: 1-1/4 in. OD x 1 in. ID x 1/8 in. wall thickness.
  • Danco O-Ring #19 (AS568B# 214): Compatible with Groen, Speakman, and Zurn faucets.
  • These tough, pliable Buna-Nitrile Rubber (NBR) O-Rings help eliminate leaks, prevent faucet drips and provide long-term use for your plumbing needs.
  • O-rings have high abrasive and a high level of tempature resistance that will withstand heat between a temperature range of 86°F to 248°F (-30°C to 120°C).
  • Danco o-rings are widely used by plumbeing proffesionals and DIY homeowners alike to prevent plumbing issues.
  • Includes 20 O-Rings per bag for faucet repair.
Check Stock

Danco 10405 I 3S-9H I Bathroom Stem for Delta, Glacier Bay and Luxtra Sink Faucets, Black

  • FAUCET STEM REPLACEMENT FOR DELTA, GLACIER BAY AND LUXTRA FAUCET STEMS - The 3S-8 Hot and Cold replacement stem is designed to fit most Delta, Glacier Bay and Luxtra sink faucets.
  • SAVE WATER & ENERGY - Some faucets overtime can develop a leak that leads to a waste of water, money and energy.
  • DURABLE AND RELIABLE CONSTRUCTION: Plastic constructions provides strength and reliability.
  • CERAMIC DISC - The 3S-8 Hot and Cold Stem for Delta, Glacier Bay and Luxtra faucets is made with a ceramic disc construction for ultimate performance.
  • HOT and COLD APPLICATIONS - The replacement faucet stem is compatible with hot and cold water applications.
  • HANDLE SUGGESTIONS: Danco handles model # 10304 and 10537 fit this faucet stem.
  • COMPLIANT - Complies with the Reduction of Lead in Drinking Water Act (RLDWA).
Check Stock

DANCO Bathroom Tub Spout with Front Pull Up Diverter, Chrome Finish, 1-Pack (88052)

  • CLASSIC DESIGN - The Danco tub spout is ideal for replacing and updating your worn-out, non-functioning tub spout and has a versatile design that ONLY FITS A THREADED PIPE connection.
  • it DOES NOT FIT a copper pipe slip-fit connection.
  • CONNECTION SIZE: This Danco diverter tub spout has ½ in. IPS inside threads and will fit a 4 in. – 4-1/2 in. stub out from tiled wall.
  • DIVERTER INCLUDED: This tub spout includes a front diverter lift rod to allow water stream to flow downward into the tub or upward into showerhead.
  • TUB SPOUT REACH: The bathtub faucet spout has a 5 in. reach.
  • BUILT TO LAST: The durable metal construction provides strength, longevity and will endure the rigors of everyday use.
  • BATHTUB SPOUT THREADED DIMENSIONS: The bathtub faucet spout metal threads measures 3-3/4 inch to threads from back of tub spout, so it is important to measure your stub out nipple to ensure it is at least 4 in. long.
  • HASSLE-FREE INSTALLATION: You will need adjustable pliers and plumber sealing tape to help prevent leaks and provide a better seal during installation. (VIDEO SHOWS MODEL INSTALLATION NOT THE EXACT SAME PRODUCT).
  • CHROME FINISH resists corrosion and tarnishing and will complement your existing bathroom fixtures.
Check Stock

ReplacementParts - Lock Lid for Mabe GE Washer laundry WH01X27954

  • Fast and easy to Install - Kit Was Specialized to Fit For Most Top Brand Washers.
  • No Questions Asked Money Back Guarantee. Proud USA Based Company..
  • ReplacementParts Grade Premium Lock Lid - Meets or Exceeds OEM Specifications Quality. Comes Brand New in Original Retail Packaging.
  • ReplacementPartsUSA Washer Lock Lid Part Number WH01X27954 replaces GTW460ASJ5WW GTW460ASJ6WW GTW460ASJ7WW.
  • Check Description for Model Compatibility. Compatible With Most Whirlpool Washers including GTW220ACK1WW GTW220ACK2WW GTW220ACK3WW GTW220ACK4WW GTW220ACK5WW GTW330ASK0WW GTW330ASK1WW GTW330ASK2WW GTW330ASK3WW GTW330ASK4WW GTW460AMJ0WW GTW460AMJ1WW GTW460AMJ2WW GTW460AMJ3WW GTW460AMJ4WW GTW460ASJ0WW GTW460ASJ1WW GTW460ASJ2WW GTW460ASJ3WW GTW460ASJ4WW GTW460ASJ5WW Compatible with Whirlpool Maytag KitchenAid Jenn-Air Amana Magic Chef Admiral Norge Roper and others.
Check Stock

EGR Exhaust Gas RecirculationValve Pressure Feedback Sensor for Ford Lincoln Mazda Mercury Replaces DPFE15 EPS4 F77Z9J460AB

  • 【Application】This EGR Valve Pressure Feedback Sensor fits for Ford E-150 E-250 E-350 E-450 Escape Expedition Explorer, Lincoln Navigator Continental, Mazda B2500 B3000 B4000 Mariner and more vehicles please check the description..
  • 【Interchange Part Number】Replaces # DPFE15 1L3Z9J460AA, 3S4Z9P449AA, 98BB9J460AB, E4ZZ9J460B,, F6DZ9J433DD, F77E9J460AA, F77E9J460AB, F77Z9J460AB,, F7DZ9J433AA, F7UE9J460AA, F7UE9J460AA, F7UZ9J460AA,, F77Z9J460AB, F77Z9J460AB, F7UE9J460AA, F7UE9J460AA, F7UZ9J460AA,, AJ9318211, AJ9318215, ZZM320302, ZZP020302, ZZP220302..
  • 【Service】100% satisfaction guarantee, If you have any issues with the Exhaust Gas Recirculation Pressure Feedback Sensor, simply contact customer service for trouble shooting , replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..
Check Stock

Ge WH13X24386 Washer Water Inlet Valve Assembly Genuine Original Equipment Manufacturer (OEM) Part

  • This part is compatible with models including.
  • GTW460ASJ9WW,GTW490ACJ2WS,GTW460ASJ8WW,GTW490ACJ1WS,GTW490ACJ0WS,GTW460ASJ5WW,GTW460ASJ4WW,GTW460ASJ7WW,GTW485ASJ5WS,GTW460ASJ6WW,GTW490ACJ5WW,GTW490ACJ4WW,GTW490ACJ3WW,GTW490ACJ2WW,GTW490ACJ1WW,GTW490ACJ5WS,GTW490ACJ0WW,GTW490ACJ4WS,GTW490ACJ3WS,GTW460ASJ1WW,GTW485ASJ3WS,GTW460ASJ0WW,GTW485ASJ0WW,GTW485ASJ4WS,GTW460ASJ3WW,GTW485ASJ1WS,GTW460ASJ2WW,GTW465ASN0WW,GTW485ASJ2WS,GTW485ASJ0WS,GTW500ASN0WS,GTW460AMJ0WW,GTW460AMJ1WW,GTW460AMJ2WW.
  • Water inlet valve assembly WH13X24386 controls the water flow into the washer.
  • Genuine Original Equipment Manufacturer (OEM) part. Compatible Brands: Ge.
  • This water inlet valve assembly (part number WH13X24386) is for washers.
  • refer to your parts diagram for a complete list of parts included.
Check Stock