Categories

Best Data Center Grounding Lug

DUOYI Ground Digital Insulation Resistance Meters, 0-2000 Ohm DCV ACV Meter Megohmmeter Megohm

  • The ground resistance tester is a commonly used instrument for testing and measuring ground resistance. It is also a common tool for electrical safety inspection and grounding engineering completion acceptance. This product is suitable for grounding resistance measured by electric power, post and telecommunications, railway, petroleum, chemical, communication, mining as well as measuring low resistance conductor resistance..
  • High precision: Three-wire resistance compensation test method can eliminate the influence of lead resistance. Fast response: Display measurement data in approximately 5 seconds..
  • Withstand voltage protection: Grounding voltage file, can withstand 300VAC (1 minute), grounding resistance file, can withstand 200VAC (10 seconds)..
  • Three-speed measurement: 0-20 ohms (resolution 0.01 ohms), 0-200 ohms (resolution 0.1 ohms), 0-2000 ohms (resolution 1 ohm).
  • Indicator light guide:Power and Wiring indicator to guide the user to use correctly, power light: power indicator. Green light:Checking the test line correct or not, the 6th 5th battery installed correctly or not..
Check Stock

Sigma Electric ProConnex 42400 Intersystem Bonding Bridge, 1-Pack

  • Mounts directly to grounding electrode conductor to ground up to four systems to a single location.
  • Includes weatherable polycarbonate cover.
  • Zinc die-cast construction with stainless steel hardware.
  • Product is cULus listed and meets 2011 NEC 250.94.
Check Stock

QUALCONNECT D-Sub Pin Insertion and Extraction Tool

  • Tool designed with grounding lug and lead straightener.
  • Package Dimensions: 2.54 H x 8.89 L x 20.32 W (centimeters).
Check Stock

WindyNation 6 Gauge AWG (20 Feet Black + 20 Feet Red) Power Inverter Battery Cable Wire Kit for DC to AC Inverters RV, Car, Solar, Marine, Off-Grid

  • Includes 1pc black + 1pc red pure copper inverter cables (select cable gauge and length), 8 feet of 10 Gauge black grounding cable with cable lug connectors, 4pcs of 5/16" cable lug connectors + 4pcs of 3/8" cable lug connectors with heat shrink tubing..
  • Extra battery cable lugs are included so you can attach the appropriate stud size for your battery and inverter mounting terminals. 4pcs of 5/16" cable lugs and 4pcs of 3/8" cable lugs allow for all possible combinations (nearly all inverters and batteries use 5/16" and/or 3/8" mounting terminals). Simply attach the appropriate cable lug stud size to the cable that fits your inverter and battery mounting terminals..
  • Inverter cables are WindyNation Power-Flex Battery Cable (pure copper) with SAE J1127 approval. Power-Flex cable is a pure copper conductor and very flexible..
  • Refer to Image 2 in the photo gallery for a chart that will help you select the correct inverter cable gauge and length depending on the amperage of your inverter..
  • Cable lugs are pure copper with a corrosion resistant tin coating. Heat shrink is black with and certified for up to 105 C and 600V..
Check Stock

KEFULDA Wheel Center Caps 6 Lugs Compatible with Chevy Silverado Set of 4 OEM Replacement for Chevy Center Caps Fits 16"/17" Inch Wheel Rims Caps

  • ✅ Perfect Custom Fit Size-- According to the original factory specifications. Perfect for the original car. They are a replica compatible for the chevy center caps used on the 16x6 and 17x7 lug aluminum and steel wheels.
  • ✅ Upgrade The Vehicle Grade-- The truck caps for chevy silverado are designed with triple chrome plating to enhance gloss. After chrome plating, the wheel center hub cap is like a reflective mirror.​ Renew the look of your car with minimal effort.
  • ✅ Easy to Install-- Plug and Play Operation,without cutting and drilling.Direct replacement and no vehicle modifications are required. Perfect aftermarket parts compatible with chevy center caps 6 lug.
  • ✅ Set of 4 Wheel Covers-- Made from high-impact, automotive-grade ABS materials for long life and extended durability. These replicas of chevy wheel center caps have anti-rust and water resistance features.
  • ✅ Compatibility-- 6 Lug wheel center caps for chevy silverado 1500 avalanche express suburban tahoe 15067578 15067580 1571237 5129 5223 truck van SUV 16 17 inch wheel rim cover,For more adaptive models, ....
Check Stock

FUZRR FR2000A+ Digital Clamp On Ground Earth Resistance Tester Lightning Protection Lightning Ground Tester 99 Set

  • The product has functions such as data storage, data access, alarm, automatic shutdown, etc..
  • The whole machine is beautiful and high-grade, wide range, high resolution, convenient operation, easy to carry, accurate, reliable, stable performance, strong anti-interference ability..
  • The product has a shock-proof, dust-proof, and moisture-proof structure. It is a commonly used and indispensable instrument for telecommunications, electric power, meteorology, computer rooms, oil fields, electromechanical installation and maintenance, and industrial enterprises that use electric power as industrial power or energy..
  • It is suitable for measuring grounding resistance of various telecommunications, electric power, meteorology, computer rooms, oil fields, electric power distribution lines, iron tower transmission lines, gas stations, factory grounding grids, lightning rods, etc..
  • The clamp ground resistance tester is controlled by a microprocessor and can accurately detect the ground resistance. It uses fast filtering technology to minimize interference..
Check Stock

LCI Lippert 3,500LB Straight Idler Trailer Axle 72HF 58SC

  • 72" from Hubface to Hubface and 58" Spring Center to Spring Center..
  • Springs are 25 1/4" long and 1 3/4" wide.
  • 5 Lug with a 4 1/2" bolt pattern. 1/2 lug studs..
Check Stock

LCI Lippert 3,500LB Straight Idler Trailer Axle 74HF 60SC

  • 74" from Hubface to Hubface and 60" Spring Center to Spring Center..
  • Springs are 25 1/4" long and 1 3/4" wide..
  • 5 Lug with a 4 1/2" bolt pattern. 1/2 lug studs..
Check Stock

DPAccessories LCE3L6HESBK04024 24 Black 12x1.5 Closed End ET Spline Tuner Lug Nuts for Aftermarket Wheels

  • Extended Thread (ET) lug nuts are designed to help center lug-centric aftermarket wheels on the vehicle's wheel studs. Our ET lug nuts fit most lug-centric aftermarket wheels with a 16mm diameter lug hole and a conical lug nut seat..
  • ET lug nuts are NOT compatible with factory original OEM wheels. ET lug nuts do NOT provide additional thread engagement on your wheel studs. Applications that need more thread engagement may require extended length wheel studs to be installed..
  • SPECS: M12x1.50 thread - Closed End ET Spline Tuner Style Lug Nuts - Conical 60 Degree Seat - 39.88mm long - 20.07mm wide - 7.62mm shank length - 15.75mm shank width.
  • REQUIRES: 19mm and 13/16 in. (21mm) hex spline tool/key part #D5210K for installation and removal. One (1) tool included. Wheels are required to be lug-centric with a 16mm diameter lug hole..
  • INCLUDES: 24 Black Closed End ET Spline Tuner Lug Nuts and one (1) spline tool/key for installation. Shipped in our signature premium packaging..
Check Stock

SL Euthtion 3000W Pure Sine Wave Power Inverter 12V DC to 120V AC 60HZ with LCD Display USB Port Wireless Remote Control（10M） Solar Outdoor

  • Product features and models: High quality pure sine wave inverter-DC to AC inverter converts the battery's 12V DC power to 120V AC. stable power is....
  • Grounding of the built-in wires of the inverter: Grounding wires have been installed inside the inverter, no external grounding wires are needed,....
  • LCD display and wireless remote control: LCD display can display more operating data than LED display, and the light is softer. The wireless remote....
  • 6 comprehensive safety protections: under voltage protection, over voltage protection, overload protection, over temperature protection, short circuit....
  • Precautions and warranty: The package contains the inverter and all required accessories. Check the power of the appliance and the installation method....
Check Stock

2-Pack 18” Tubeless Tires On Rims - 18x8.5-8 Tire and Wheel Assemblies - 4-Lug 4” Center - 2.83” Center Bore - Load Range B Max Tire Weight of 815 Lbs - Compatible with Alumacraft Boat Trailers

  • 18” TUBELESS PNEUMATIC TIRES ON RIMS - Each pack includes 2 pieces of 18-inch fully-aired tubeless pneumatic tires pre-mounted on high-quality steel rims. LUG NUTS ARE NOT INCLUDED.
  • 18X8.5-8 TIRE AND WHEEL ASSEMBLIES - This means the tire has a diameter of 18 inches, a width of 8.5 inches, and a rim diameter of 8 inches. These wheels also have a rim width of 7 inches.
  • 4-LUG 4” CENTER LUG CONFIGURATION - 4 lugs from the center of the stud to the center of the opposite stud (CC) is 4 inches. Hub stud size is 1/2-20 60-degree conical lug nuts. Required torque is 50-75 ft/lbs.
  • LOAD RANGE B WITH MAX TIRE WEIGHT OF 815 LBS - 4 ply tires with Load range B. Max tire weight rated at 815 pounds at a max pressure of 35 PSI.
  • COMPATIBLE WITH SELECT BOAT TRAILER AND CARGO TRAILER BRANDS - Suitable for most popular boat trailer brands like Alumacraft, Karavan, Continental, Lund, and more. Compatible cargo trailer brands include Big Tex, E-Z Hauler, FastTrac, and more. Also, suitable for golf carts.
Check Stock

EZAccessory 2 Wheel Adapter 6x5.5 to 8x6.5 (6x139.7 to 8x165) Thickness 2 inch

  • 【Purpose】Convert from 6 lug vehicle to 8 lug wheel, meaning putting 8 lug wheels on 6 lug vehicle.
  • most commonly used for Chevy 6 lug to install 8 lug Chevy wheels 8x6.5" pattern.
  • 【Fit Vehicle】Fit vehicles of 6x5.5" or 6x139.7mm bolt pattern. Your Garage filter is to confirm fitting of your vehicle only, not for the wheels..
  • 【Convert Wheel】Convert to wheel must be 8x6.5" or 8x165mm bolt pattern. Sold by pair (2 adapters).
  • 【Quality Assurance】Aircraft quality TRUE forged 6061 T6 lightweight billet. CNC machined with precision craftsmanship. Features in high load capacity and keep stock ride. Anodized for corrosion resistance. Heat-treated 10.9 grade steel studs with mounting lug nuts included..
  • Adapters will give you widened stance as well as stability. If vehicle studs protrude outside the inner piece adapter, you will need to shave down vechile studs..
Check Stock

WHEEL CONNECT PCD Gauge，Wheel/Rim Bolt Pattern Measuring Tool, PCD Ruler, Sliding Caliper for 4 5 6 8 Holes

  • [WHAT IS IT FOR?] Wheel / Rim PCD gauge is a handy tool for measuring the PCD data of the car and wheel. Simply slide the caliper to match the wheel lug holes or wheel hub holes, you will read the data in Metric or Imperial..
  • [WORKS WITH MOST OF PCD] WHEEL CONNECT PCD gauge works with most of 4, 5, 6, 8 lugs wheel. 4-Lugs:4 x 100, 4 x 108, 4 x 110, 4 x 4.5"(4 x 114.3) 5-Lug: 5 x 100, 5 x 105, 5 x 108, 5 x 110, 5 x 112, 5 x 4.5”(5 x 114.3),5 x 115, 5 x 4.75”(5 x 120), 5 x 5.0"(5x127), 5 x 130, 5 x 135, 5 x 5.5"(5 x 139.7), 5 x 150, 5 x 165.1(5x6.5") 6-Lug: 6 x 4.5"(6 x 114.3), 6 x 5.0"(6 x 127), 6 x 135, 6 x 5.5"(6 x 139.7) 8-Lug: 8 x 6.5"(8 x 165.1), 8x170, 8x180, 8x200, 8x210.
  • [RELIABLE QUALITY] WHEEL CONNECT provides full list of best quality wheel accessories at reasonable price. PCD gauge made of high-quality ABS hard plastic..
  • [WHO NEEDS THIS? ]PCD gauge is a necessary tool for Tire and wheel stores, Car dealers and person who likes to change wheels by him/herself..
  • [SHIPPING AND SERVICE] Fast delivery by amazon. Any inquiries will b....
Check Stock