RV Power Gear Slide Out Motor, PN 523900 523143 523983 521976 Slide Out Motor Replacement Gearbox Motor, Double Shaft 12V -3Year Warranty
- 【After-sale Guarantee】We have a 3-year warranty,if you have any quality problems or the product doesn’t fit, you can send us an email, we will give you a replacement or a full refund within 12 hours.ATTENTION PLEASE!!! There are many rv slide out motors replacement that look similar to each other but are not fit.Please check your model before ordering!.
- 【Replacement Part Number】The slide out motor can replace Klauber 523900, Lippert 383745, 523143, 523983, 521976, 523529, 524094, 524327, 524411, 523931, 524246, 520819, 522967, 522176 (check specs) 386322 (verify bolt pattern) ,521292, 386480, 368185, 523982, 523143S (has the smaller motor but same ratings), 523766, 130-1235, 130-1204c, 130-1164, 130-1187, 13-1109, 130-1219, 13-1133, 13-1119, K01469B300, K01439E300, K01531A300, K01265E300, 1510000006, K01265D300 (Gear ratio lower), K01265B300..
- 【Specifications】Speed 9 RPM @ 850 in-lbs,17 Amps 12 RPM @ 400 in-lbs,9.5 Amps 14 RPM (no load) Voltage 12 DC Torque 850 in-lbs Holding Torque 500 in-lbs..
- 【Easy to Install】Please watch the YouTube video before installing the motorhome slide out motor replacement part, so that your sliding motor can work quickly. You can solve the problem at half the cost, saving time and money..
Check StockElectric Bicycle Motor Kit, 12V 250W DC High Speed Electric Bike Conversion Kit with Speed Controller, 13 Tooth Sprocket, 38 Section Chain Electric Gear Motor Kit for E-Bike, Electric Motorbike
- 【EASY TO USE & CONTROL】This electric gear motor is easy to use and control, providing steady speed and sensitive braking and steering control. The rated power is 250W, and the rated speed is 2950 RPM, Main application is suitable for electric bicycle..
- 【HIGH QUALITY】This electric DC motor equipped with reliable metal housing protects the internal circuit and has good heat dissipation performance to avoid thermal overload. With long life, high speed operation, high temperature resistance, high power..
- 【PRACTICAL ELECTRIC BIKE CONVERSION KIT】This electric motor kit comes with a 38 section chain, a speed controller and a 13 tooth gear, can easily used in practicality, gear motor supports working with low noise, low current and no sparks..
- 【WIDE APPLICATION】This dc geared motork kit is suitable for motorized bicycle, moped, mini bikes, pocket bikes and electric dirt bikes,scooters, e-bike, atv and so on..
- 【100% QUALITY ASSURANCE】We are very confident in the quality of this electric bike motor kit, and provide warranty or refund for it. Please feel free to reach us if you have any questions about your purchase..
Check StockInvicta ITK002 Multi-Function Watch Tool Kit Set
- ✿【3 Rotation Mode Setting】 1.OFF-turn on/off the watch winder.
- Gear B: 2 mins CW → stop 6 mins → 2 mins CCW → stop 6 mins → repeat..
- Gear L: 5 mins CW → 5 mins CCW → last 3 hours→ stop 9 hours → repeat.Multiple rotation modes make the watch winder box easy to use..
- ★【Super Silent Motor】The watch box uses Japanese ultra-quiet motor to make your watch rotate quietly and safely, which is beautiful and practical, and the winding operation has no running noise. So it could be put anywhere like bedroom or office without representing a distraction factor..
- ◆【2 charging methods】USB-DC power cable.
- you can use the USB cable to connect the charging head of the mobile phone, convert it into a DC power cable for charging, or use the DC converter cable to connect two watch winders for charging ..
- ♥ 【Flexible Watch Pillows】The watch pillow is made of high-end leather with soft inner lining to protect your watch from damage. The pillow is flexible and elastic to fit different sizes of watches and you can also choose multiple ways to store your watch and display your watch in multiple directions..
Check Stock5pcs Micro Cellphone Coreless Vibration Motor, Miniature Vibration Coreless Motor, DC 3V 11.2x3.2mm
- Easy to Use: Professional design and reasonable structure, easy to replace and use.
- Material: The gear motor is made of high quality copper, appearance oxidation treatment,durable, fine workmanship and high transmission accuracy..
- Godd Replacement: The gear motor is great workmanship, perfect replacement for the old or damaged one..
- Optional Style: Available in nine styles for choice: 15RPM, 30RPM, 50RPM, 60RPM, 100RPM, 200RPM, 300RPM, 500RPM, 1000RPM..
Check Stockuxcell DC 3V 5RPM Micro Speed Reduction Motor Mini Gear Box Motor with 2 Terminals for RC Car Robot Model DIY Engine Toy
- Small speed reducing motor with metal gearbox increases torque..
- Micro gearbox motor for DIY RC Hobby, vehicles, drones, planes and more..
- Mini dc gear motor is small and lightweight to easily mount a wheel on the motor's output shaft or copter blade..
Check StockMY1016Z 24V 250W Electric Wheel Chair Brushed Gear Wheelchair DC Motor with 120rpm can work with Joystick (24V)
- MY1016Z 24V 250W Electric Wheel Chair Brushed DC Motor.
- 24V 250W Electric Brushed Gear Wheelchair DC Motor with 120rpm.
Check StockPLUMIA DC 12V 30RPM Gear Motor Centric Output Shaft 37mm Diameter Gearbox High Torque Electric Micro Speed Reduction Geared Motor
- Product packaging: 1×DC Gear Motor, 6×Screw, 6×Nut..
- Pure copper wire core rotor, galvanized surface treatment, high-temperature resistance, high abrasion resistance, strong load capacity, sturdy and durable, effectively protect the gear box motor body.With precision winding technology, the geared motor power instant increased by 30%..
- Using high hardness steel, good toughness, impact resistance, the quality of the bearing and the service life of the gear motor are improved, extremely durable..
- You also can adjust the speed, but the motor speed can only be reduced, can not be raised. Low noise and high torque, such as 10rpm can drive 15 kilograms..
- We only offer 100% New PLUMIA Brand high quality motors! Any quality issues, We promise 100% unconditional return service..
Check StockGreartisan DC 12V 35RPM Turbo Worm Geared Motor High Torque Turbine Worm Gear Box Reduction Motor 6mm Shaft JSX255-370
- ALL-METAL GEARS: High-temperature resistance, high abrasion resistance, strong load capacity, sturdy and durable, effectively protect the turbo worm gear box motor body..
- PURE COPPER WIRE CORE ROTOR: With precision winding technology, the turbo worm geared motor power instant increased by 30%..
- D SHAPED OUTPUT SHAFT: Using high hardness steel, good toughness, impact resistance, the quality of the bearing and the service life of the turbo worm gear motor are improved, extremely durable..
- GEAR DC MOTOR with MICRO-TURBINE WORM: You can change the wiring-connection to change motor rotation. Low noise and high torque..
- RELIABLE GURANTEE: Any quality issues, we promise 100% unconditional return service. If you need other voltage and rpm, please feel free to contact us!.
Check StockBlack 37mm DC Gear Motors Mounting Bracket, Iron Anti-rust Gearbox L-shape Fixed Seat, Gear Reduction Motor Holder
- Anti-rust Paint Technique: Greartisan 37mm DC deceleration motor fixed seat adopts advanced anti-rust paint technique, which makes the bracket be used for a long-term..
- Universal Size: Greartisan geared motor mounting seat can be widely used in 37mm small gear motor series..
- Effortless Installation: This metal motor holder has convenient holes for mounting..
- The precision cut mounting holes is perfect matched with M3*6mm screw..
- Package Includes: 1* 37mm DC geared motor fixed seat..
Check StockSuperHandy Electric Trailer Dolly 3600LBS and Trailer Tongue Jack 3500lbs [Bundle Deal]
- PROFESSIONAL SPECIFICATIONS - This Electric Power Dolly is powered by DC 24V 7Ah 800W electric driven motor. Providing a Maximum Trailer Weigh:....
- ADVANCED DESIGN - Our portable quiet operating RV/Trailer Transport Electric Dolly is built of a heavy duty steel constructed frame with exceptional....
- PROFESSIONAL SPECIFICATIONS - This Electric Trailer Power Tongue Jack is powered by DC 12V Steel Gear Motor & 25A circuit Breaker. The motor & one....
- EFFICIENT DESIGN - Our portable quiet operating RV/Trailer Electric Tongue Jack is built of a heavy duty durable hardened steel gears providing years....
Check StockDragonhawk Atom Rotary Pen Tattoo Machine Japan Motor for Tattoo Artists (Silver)
- Weight: 135g( 0.30lbs). Stroke: 3.5mm. 0 – 4.5mm adjustable needle depth. DC connection.
- Dragonhawk rotary pen tattoo machine Japan motor, continuous operation, Low noise, Long-lasting stability, Light weight, unibody..
- Operating voltage: 5-15 V DC, Rpm range Stitches / Sec: 8V-8000rpm / min 8-800 / sec.
- This machine features a powerful motor and an advanced gear system that guarantees reliable, quiet operation without any vibration.
Check StockFisher Space Pen - Non-Reflective Military Matte Black M4B- Cap-O-Matic - Gift Boxed
- 12 Volt DC Motor, input power 7. 7hp (5. 6kw) 24 Volt DC, input power 7. 7hp (5. 6kw).
- Fully sealed with bolt pattern 11. 48" X 8" (164. 6 mm X 291. 6 mm) - Long Drum 8 bolts, 5/8"-11.
- Steel Cable 1/2″ X 75′ (12. 7 mm X 24m).
Check StockTraxxas 1/10 Slash, 2WD, RTR (Includes Battery & Charger): PinkX
- Traxxas 58034-1 - Slash XL-5 Brushed 1/10 2WD SCT RTR, w/ iD Battery, Pink.
- Features: Titan 12-Turn 550 modified motor XL-5 waterproof electronic speed control Water-sealed receiver box and steering servo Metal gear Magnum 272 transmission Torque-Control slipper clutch 30+mph top speed Adjustable steel turnbuckles with captured rod ends The tires are mounted on satin-finish 2.2" Slash wheels Included optional 23-tooth pinion gear Traxxas 4-amp DC Peak Detecting Fast Charger Traxxas Power Cell NiMH Battery with iDTM Avai.
- Includes: (1) Slash Short Course Race Truck (1) TQ 2.4GHz Radio System (1) ESC,(1) Body (1) Motor (1) 7-Cell 3000mAh NiMH Battery (1) 4-Amp DC iD Car Charger Illustrated Instruction Manual Decals.
- Specs: Vehicle Dimensions: Length: 22.36" (568mm) Width: 11.65" (296mm) Height: 8.42" (214mm) Front and Rear Track: 11.65" (296mm) Distance Between Outer Edges of Wheels Wheelbase: 13.2" (335mm) Ground Clearance: 3.5" (89mm) Weight: 76.2oz (2.16kg) Body Dimensions: Length: 21.3" (542mm) Width: 11.4" (289mm) Height: 5.3" (135mm) Height: 5.3" (135mm).
- Part number(s) included (in factory packaging): 58034-1.
Check Stock