Rejuvenation
- 【High Performance】AVID POWER auto-ranging 6000 counts digital clamp multimeter is ideal for accurate measurement of AC/DC voltage, AC/DC current,....
- 【Multifunction】This AMP clamp meter features NCV testing and detecting function with backlight alarm, Auto power off, Low battery indication, Data....
- 【Safety Compliance】Meeting IEC 61010-1, CAT. III 600V, CE standard. High Voltage Protection.
- 【Easy to Use】You can measure current by clamping the meter around one of the wires(be sure not the whole power cord, otherwise the multimeter....
- 【What You Would Get】1*Durable Clamp Multimeter, 2*Probe Pens, 1*K Thermocouple, 2*1.5 V Batteries, 1*Tool Bag, 1*English User Manual and 24H....
Check StockTaidacent Ohm Meter Resistance Tester Ohmmeter Digital DC Resistance Measuring Instrument Fixture Resistance Measure Panel Meter (200K Ohm, DC5V with Cover)
- Power supply: DC5V/DC12V optional (current consumption is less than 50mA).
- This ohmmeter is a common ground instrument, non-isolated, it is recommended to use a separate power supply, that is, the power supply is not related to the signal.
- The resistance meter cannot be measured with electricity, otherwise the meter will be burnt out.
- Select a suitable range, if the range is selected too much, the small resistance cannot be recognized or the measurement is inaccurate.
- The meter head is a common ground instrument (that is, the negative pole of the power supply and the negative pole of the signal are connected), it is recommended to use a separate, independent, and isolated power supply (that is, the power supply and the measurement terminal are not related).
Check Stock
AIOMEST Digital Clamp Meter 6000 Counts, TRMS Multimeter with Auto Ranging, Amp Meter Measures Inrush AC&DC Current, AC&DC Voltage, Resistance, Capacitance, Diodes and Temperature
- ✨【6000 COUNTS CLAMP METER】: AN-6205 clamp meter is professionally designed for electricity circuit properties measurement. Test a wide range of measurements including AC/DC Voltage 0.01mV~600V, AC/DC Current 0.01A~600A, Resistance 0.1Ω~60MΩ, Continuity and Diode Test..
- ✨【AUTO POWER OFF SAFELY】: When measurement exceeds 15 minutes without switching mode and pressing key, the meter will switch to standby mode. Press any key to exit standby mode. The auto power off mode can provide the voltmeter with a longer service life while also better protecting the battery..
- ✨【STRONG OPERABILITY】: Built with 1.34 inches large double open jaw and pick up AC/DC Current flowing through the conductor, increasing safety while improving this meter’s capabilities. Over-load protection circuit can effectively help you to carry out measurement work within the measurement range. Auto ranging and auto LCD backlight make your measurement more convenience..
- ✨【CONVENIENT FEATURES】: The avometer included relative value, MAX/ MIN, data hold, inrush current test and audible continuity test, ideal for electrical troubleshooting problems, circuit properties measurement, automotive repair and maintenance, lab, industrial and household applications..
Check Stock12v DC Plug Adapter Charger for Metabo/Milwaukee/Dewalt Heated Jacket Battery
- The 12v DC Plug Adapter is compatible with standard 12v DC power outlets found in automobiles, heavy machinery, and recreational vehicles.
- The DC Adapter is compatible with all Milwaukee 49-24-2301 M12 Heated Jacket 12V DC Plug Adapter 49-242301 4924-2301 49242301 Power Supply Cord..
- The DC Adapter is compatible with all Metabo / DeWalt 12v Heated Jacket.
Check Stock
AD8317 1M-10GHz 60dB RF Power Meter Logarithmic RF Signal Power Detector Controller for Amplifier
- EASY TO USE :The logarithmic power meter adopts AD8317 chip design, which is convenient to use, small in size, high in efficiency, easy to install, stable and reliable, and is used for radio frequency signal power detection..
- DETECTABLE :The logarithmic power meter has strict quality control and quality assurance. It can detect the power of the radio frequency signal from -55dBm to 0dBm, and convert the radio frequency signal into a DC voltage output..
- DYNAMIC RANGE :The greater the amplitude or power of the radio frequency signal, the higher the output voltage, and the output voltage is proportional to the logarithm of the input signal amplitude, thereby expanding the dynamic range of the detection signal to 55dB..
- WIDELY USED :The logarithmic power meter adopts advanced technology and exquisite craftsmanship, and has been improved to improve durability. Logarithmic detector can be widely used in radio frequency signal detection, signal power measurement, and environmental field strength detection..
Check Stock
B&K Precision 878B Dual Display Handheld Universal LCR Meter
- Converts AC to DC: features AC to DC power supply Variable linear/ regulated design. Provides convenient and reliable AC-to-DC Power conversion W/ constant source of DC voltage. Works w/ cellular phones, CB radio, scanner, ham radio, etc.
- Usb and Screw-Type terminals: This workbench linear variable power supply features dual USB charge port and universal screw connection terminals compatible w/ a wide range of device/equipment. Used to test device/equipment operation and performance.
- Plug-in operation: The simple plug-in operation provides a constant source of DC voltage, allowing for quick and consistent power conversion. Switch-activated power control eliminates the need for an external battery or additional power source.
- Short-circuit protection: Equipped w/ built-in electronic overload and short circuit protection to ensure the safety of the operator and any connected electronics. Has rugged and durable housing construction safe for benchtop or desktop Placement.
- Amp gauge and volt meter display: this DC bench power supply is equipped with rotary control for the adjustable powe....
Check StockVU Meter 2x Panel VU Meter Warm Back Light Recording & Audio Level Amp with Driver Board
- L/GND/R: This driver board with low level signal input terminals for connections are CD players, computer sound cards, the first stage, and other audio signal source device, wiring L, GND, RW respectively: Left, the right channel.
- Power Consumption:Input AC / DC 12V-15V power supply for the drive plate. (Recommended independent power transformer, or a separate power supply for the winding. the backlight current is 45 mA when drive plate off work.
- 2 Resistor:R1 and R2 are two adjustable resistors of driver board,which can control the size of the hands swing..
- Rectifier RegulatorThe backlight DC12V power meter is used for rectifier regulator of the backlight driver board Please notice that the positive and negative head interface..
- Package Content:2 x VU Panel Meter+1 x Driver Module+1 x Cable.
Check StockVoltage Amp Meter DC DROK Battery Monitor DC 0-300V 200A Ammeter Voltmeter for Solar System Setup Power Energy Capacity Volt Current Detector Panel with Hall Sensor
- Multifunctional Meter: DROK multimeter panel is available to measure percentage and AH of remaining capacity, DC positive and negative bidirectional....
- Hall Sensor & Easy Mount: the voltage amperage meter is coming with a Hall transformer to for isolated measurement, reliable and safe.
- Display: backlight can be controlled to be ON or OFF as user’s need.
- Equipped with full angle of view LCD screen, users could see the display....
- Alarming Function: it will alarm and flash to draw your attention when the real voltage is higher or lower than preset alarming voltage and real....
- Wide Applications: Can be used as dc amp meter, digital volt meter, power meter, battery capacity monitor. Suitable for all kinds of batteries, such....
Check StockGLTL Gaussmeter Tesla Meter Surface Magnetic Field Tester with N/S Function + Metal Probe
- ★, Application: Handheld digital WT103 gauss meter used to measure the magnetic field of the permanent magnet material surface, DC motors, speakers, magnetic separator, permanent magnetic separator magnetic field demagnetization and the leakage of the magnetic field, parts machining residual magnetic field. Measuring range: 0 to 200mT milli-Tesla of - 2000mT milli-Tesla.
- ★, Basic error: ±2percent ±3 word (below 1000mT millitesla of) ±5percent ±3 words (over 1000mT millitesla).
- ★, Ambient temperature: 5℃~40℃ Relative Humidity: 20%~80% (non-condensing) Power supply: one 9V battery, external power supply (Battery is not included).
- ★ ,Package Included: 1 x WT103 Gaussmeter Tesla meter.
- 1 x DC Adapter ( includes AAA*3 Batteries ).
Check Stock
Inrush Current Clamp Multimeter, BTMETER BT-570N TRMS 5999 Display Clamp-on Amp Meter for AC/DC Voltage Amperage Ohm Temperature Test
- ...urrent, Continuity test with buzzer, Diode test..
- ✅BOTH AC/DC CLAMP-ON AMMETER - High resulotion, True RMS allows you get accurate measurement regardless of waveforms. Relative mode for Capacitance, DC Inrush, Zero out for lower amps measurement, data hold, max/min, auto power off, polarity and low battery indicator..
- ✅SAFE AND EASY TO USE - Overload protection on all ranges. Use this clamp amp meter for unidentified wire testing, Contactless amperemeter test for amperage, Avoid electric shock without touching any wires..
- ✅HIGH ACCURACY AMPERAGE METER - 0.1 amp resolution for AC DC Amps measurement for 200A, 1A amp resolution for 1000A. Ideal inrush clamp meter for troubleshoot electrical mechanical problem of cars motors boat HVAC household appliances safely and accurately..
- ✅LARGE DIGITAL DISPLAY - Well built with backlit LCD for visibility in dimly light areas. Extensible thermocouple probe support measures high temperature from -4 to 1832℉(-20 to 1000℃). Jaw Caliber Size 1.77 inches (45mm).
Check Stock
Sper Scientific 850009 UV Light Meter
- ...ensor: The exclusive photo diode colour correction filter, spectrum meet C.I.E. Cosine correction factor meet standard | Large LCD display with barograph and Indicator | Zero Adj.: External adjustment by pushing button (40 Lux Range Only) |Peak Hold: To hold the peak display | Data Hold: To freeze the display value.
- Power Supply: DC 9V battery. 006P, MN1604 (PP3) or equivalent. | Power Consumption: Approx. DC 8 mA | Weight: 220 g/0.48 LB | Lux Meter Dimensions: 200 x 68 x 30 mm (7.9 x 2.7 x 1.2 inch) | Sensor Probe: 82 x 55 x 7 mm (3.2 x 2.2 x 0.3 inch).
- Memory: Save the max. & min. value with recall | Power off: Auto or manual power off. | Over Range Indication: “- - - - “.
- Under Range Indication: “_ _ _ _” | Data Output: RS-232 serial data output | Operating Temperature:32°F to 122°F ( 0 to 50°C) | Operating Humidity: Max. 80% RH.
- Supply Scope: 1 Unit of Digital Lux Meter, Light Sensor Probe with Protection Cover, Instruction Manual and Factory Calibration Certificate | Applications: Auditoriums, Theatres, Indoor Stadiums, Schools, Labs, Night Events, Amphitheatre, OT Rooms.
Check StockUniversal Compact Bench Power Supply - 50 Amp Variable Linear Regulated AC to DC Power Converter/Power Supply Adjustable DC Voltage Supply with Amperage Gauge Volt Meter USB Port - Pyramid PSV500
- CONVERTS AC TO DC: Features AC to DC power supply variable linear / regulated design. Provides convenient and reliable AC-to-DC power conversion w/....
- USB AND SCREW-TYPE TERMINALS: This workbench linear variable power supply features dual USB charge port and universal screw connection terminals....
- PLUG-IN OPERATION: The simple plug-in operation provides a constant source of DC voltage, allowing for quick and consistent power conversion.....
- SHORT-CIRCUIT PROTECTION: Equipped w/ built-in electronic overload and short circuit protection to ensure the safety of the operator and any connected....
- AMP GAUGE AND VOLT METER DISPLAY: This DC bench power supply is equipped with rotary control for the adjustable power supply DC and analogue gauge....
Check StockExtech MA445 True RMS 400A AC/DC Clamp Meter with NCV
- ...backlighting ensures better visibility in dark work areas.
- ▲The "Return to Zero" Function : reduces data errors affected by the earth's magnetic field and helps you get more accurate measurements.
- ▲Automatic Sleep Mode : After 30 minutes of inactivity, it automatically switches to sleep mode to save energy.
- ▲Low Power Indicator : When the clamp meter is in a low battery state, the LCD display of the clamp meter will display a low battery symbol to remind you to replace the battery.
- ▲Fixed with Free Additional Test Lead : free battery and test lead, everything packed in a case, direct use.
- The design is ergonomic and portable, ideal for professionals or new users.
- ▲Package Content : 1 x Digital Clamp Meter, 2 x Test Leads, 3 x 1.5V AAA Batteries, 1 x Carrying Bag, 1 x User Manual.
- ▲24-Month Warranty : We provide 24 months unconditional warranty and lifetime after-sales service.
Check Stock
