MACH3 Controller USB MACH3 100Khz Motion Controller Card Breakout Board Controller Card for CNC Engraving Servo Motor Stepper Motor Servo motor
- 【Functions】The function of this motion control card includes that it supports automatic probe tool, emergency input, limit switch, and supports....
- 【4-axis Linkage】Usb interface board supports for 4-axis linkage, you can connect four stepper motor drives or servo drives. 4 general-purpose....
- 【Wide Use】The maximum step-pulse frequency of motion control card is100KHz, which is very suitable for CNC Engraving, Servo Motor, Stepper Motor....
- 【Advantage】The motion controller needs using external 24V DC power to isolate USB and external port, and to make the system more stable. And it....
- 【Drive Output Interface】The 4 general-purpose isolated relay drive output interface can drive four relays for controlling the spindle starts,....
Check Stock
15 Pieces Servo Extension Cables Servo Extension Male to Female RC Servo Extension Cord Wire Cable Compatible with RC JR Futaba RC Car Airplanes (3.9 Inch,5.9 Inch,11.8 Inch,19.7 Inch,23.6 Inch)
- Wide application: these servo extension s are compatible with Futaba and JR servo, plane and helicopter servo connection or receiver connection, also nice for remote control car, RC car and more.
- Appropriate sizes: the servo extension cord measures approx. 3.9 Inch, 5.9 Inch, 11.8 Inch, 19.7 Inch, 23.6 Inch in length, different size for your use, the color is black and red.
- Package includes: this package includes 15 pieces of male to female servo extension cables, enough quantity for you to use and replacement, providing more convenience for you.
- Feature: this male to female servo extension cord featured with female connector on one side, and male connector on the other side, can be connected to the receiving set and steering engine.
- Useful function: the servo extension wire is suitable for jumping from board to board, or can be applied to control panel cable remote control, which is male to female.
Check StockBotBrain Robotics Control Board
- Basic Stamp microprocessor, the board uses sensor inputs, a program, and servo outputs to operate a robot using the Parallax pBasic language.
- Features include 8 sensor inputs and 5 servo outputs, all with polarized connectors as well as a built-in piezo "speaker".
- Holes on side on the side of the board bolt to Merkur parts.
Check Stock
9 Pieces JST Y Connector 3 Pin JST Plug Splitters Servo Extension JST Male to Female RC Servo Extension Cord Wire Cable Compatible with RC JR Futaba RC Car or Airplanes (Mixed Style)
- Package includes: you will 9 pieces of servo extension cord, 3 pieces of male JST to female JR (Futaba) cable, 3 pieces of male to 2 female Y harness, 3 pieces of male to 3 female Y harness.
- Abundant quantity and diverse styles that can meet your various needs.
- Appropriate sizes: the servo extension cord measures approx. 15 cm/ 5.9 inches in length, universal size for your use, the color is white, black and red.
- Extensive usages: these JST male to female are compatible with Futaba and JR servo, plane and helicopter servo connection or receiver connection, also nice for remote control car, RC car and more.
- Well made: JST connector is made of quality PVC material, with good insulation and flame retardant.
- The interior is made of tinned copper, which has a good transmission and low resistance.
- Useful function: the servo extension wire is suitable for jumping from board to board, or can be applied to control panel cable remote control unit, which is male to female.
Check Stock10 pcs 3.93inch JR Style Servo Extension Cable Lead Wire - 3-Pin JR Plug Male to Male RC Servo Wire Extension Cord
- 3-Pin JR plug male to male connector servo extension lead wire cable..
- There is a 3 pin JST RE connector on each end. This is a simple 3 wire cable. Ideal for jumping from board to board, or something else..
- Practical range: For Airplane, Helicopter, Quad co-pterter , Multi-coater RC car servo connection or receiver connection..
- Packaging quantity ：10 Pcs * 10cm JR 3pin male to male plug servo extension cables wires cords leads..
Check Stock
15 Pcs Servo Extension Cable JST Y Connector 3 Pin JST Plug Splitters Male to Female Servo Adapter JST Extension Servo Wire Connector Compatible with RC JR Futaba RC Car or Airplanes, 3 Styles
- You Will Get: the package comes with 15 pieces of servo extension cables, including 5 pieces of male JST to female JR (Futaba) cable, 5 pieces of male to 2 female Y harness, 5 pieces of male to 3 female Y harness, sufficient quantities and multiple styles can satisfy your different using needs.
- Proper Size: the servo connector is about 15 cm/ 5.9 inches in length, suitable size for your to use, with colors of white, black and red.
- Wide Application: these JST plug splitters are compatible with Futaba and JR servo, plane and helicopter servo connection or receiver connection, also suitable for remote control car, RC car and so on, providing a lot of usages for you.
- Nice Craftmanship: the JST plug connector is made of quality PVC material, which has good insulation and flame retardant, and the interior is made of tinned copper, featured a good transmission and low resistance performance, you can rest assured to use it.
- Practical Function: the servo wire connector can be applied for jumping from board to board, or nice to control panel cable remote control part that is male to female.
Check Stock
MakerFocus PWM Servo Motor Driver IIC Module 16 Channel PWM Outputs 12 Bit Resolution I2C Compatible with Raspberry Pi 4 3B+ 3B Zero/Zero W/Zero WH and Jetson Nano
- Note: The Raspberry Pi and Servo in the photo are not included. User Manual: Please get the link from the operation guide below.
- Note: 1.If you only connect 5V power supply to USB interface, servo cannot be driven.
- 2.You should connect higher power supply for higher-power servo.
- 3.Make sure servo are connected properly, otherwise they will not move..
- Servo Motor Driver: You may have tried to control a robotic arm or a hexapod walker by using the Raspberry Pi, but finally get frustrated due to the limited number of PWM outputs and the jittering servo. Now you get a new option to bring your ideas to life, we prepare this useful Servo Driver Board for you..
- Raspberry Pi connectivity, compatible with Raspberry Pi 4 3B+ 3B 2B+ 2B Zero/Zero W/Zero WH and Jetson Nano..
- Up to 16-Channel servo/PWM outputs, 12-bit resolution for each channel (4096 scales).
- Integrates 5V regulator, up to 3A output current, can be powered from battery through VIN terminal..
Check StockDS3218 High Torque Metal Gear Digital Servo Water Resistant RC Servo 20kg 270 Degree Rotation RC Toys DIY Model for Baja Cars (Pack of 4 Sets)
- Fit for: tekno sct 410.3, ruster chassis, dhk maximus, TRX4, Gen 7 pro etc.
- This servo is waterproof,but it can not work underwater.
- What you will get: 4pcs DS3218 digital servo and 4pcs 25T Servo Arm.
Check Stockkuman Complete Starter Kit with Detailed Tutorial and Reliable Components for Arduino Project Mega 2560 Robot breadboard Kits
- This is an upgraded Super Starter Kit with free PDF tutorial(23 lessons), developed specially for those beginners who are interested in..
- The kit has 44pcs components With tutorial in a CD including project introduction and source code, add More modules: LED Thermistor Touch sensor module than old version..
- 1602 LCD display with pin header (need to be soldered by yourself）HC-SR04 Ultrasonic 5V Relay Power Supply Module Servo Motor with DC Prototype Expansion Board are included..
- A complete set of most common and useful electronic components for clear listing in a nice Plastic package..
- Detailed tutorials including project introduction and source code CAN BE PROVIDED FOR FREE, contact us BY Email to get documents..
Check StockDIYmall 10pcs 10cm 3.93inch Male to Male JR Plug Servo Extension Lead Wire Cable 3Pin 100mm for RC Plane
- 10CM Male to Male JR Plug Servo Extension Lead Wire Cable.
- Great for jumping from board to board or just about anything else..
- There is a 3-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers..
- Length:100mm Type:JR Plug Servo Extension wire (Male to Male).
Check StockNema23 2N.m 57 Hybrid Closed Loop Servo Stepper Motor 2Nm 76mm+HSS57 Servo Driver Controller CNC Kit 24-50V DC For CNC Router Engraving Milling Machine
- Name:Nema23 2N.M Servo Motor Driver CNC Kit.
- Servo Driver:HSS57 2-Phase Hybrid Stepper Servo Driver.
- The torque reducing is much lower than open loop stepper motor when it is at higher speed.The high speed performance and torque are enhanced in a....
Check StockNema24 3N.m Closed Loop Stepper Servo Motor 88mm 5A+HSS60 Hybrid Driver CNC Kit for CNC Router Engrvaving Milling Machine
- Servo Driver:HSS60 2-Phase Hybrid Stepper Servo Driver.
Check Stock6Pcs ShareGoo JR Style Servo Splitter Cable, 2.75' Servo 1 Male to 2 Female JR Y Harness Y Cable Extension Wire for RC Models Car Airplane Helicopter Drone Boat
- Used for RC cars trucks airplanes helicopters rc boat servo connection, receiver connection and flight control board..
- This servo Y-cable allows you to control two servos with one radio channel..
- Material: 22AWG silicone wire.Wire Length: 7CM/2.75".
- 3Pin wire cable.Male JR plug to 2 Female JR plug Y Harness cable..
- Pack of 6 JR style servo splitter cable,unique design, professional quality JR style connectors..
Check Stock
