Categories

Best Dc Servo Print Motor

Kiro&Seeu L293D DC Motor Drive Shield Stepper Motor Drive Shield Expansion Board Compatible with Arduino Duemilanove Raspberry Pi

  • This is a commonly used DC motor drive module, using a small current 293 chip DC motor driver chip..
  • Using this chip you can use DC motors and power supplies of up to 10 Volts, that some pretty big motors and the chip can supply a maximum current of 600mA per channel..
  • Tested compatible for Arduino Mega, Diecimila & Duemilanove..
  • 2 interface for 5V Servo connected to the Arduino's high-resolution dedicated timer - no jitter..
  • Multi-function, easy to operate, a strong driver library support and feature updates..
Check Stock

Orion AstroTrack Drive for EQ-1 Equatorial Telescope Mount

  • Economical motor drive provides hands-free celestial tracking for small telescopes.
  • Cordless DC servo motor works on Orion EQ-1 and Min-EQ mounts.
  • Adjustable drive speed control knob allows precise tracking of both solar system and deep-sky objects.
  • Ideal for short-exposure piggyback and planetary astrophotography with small telescopes.
  • Requires 9V battery, which provides approximately 35 hours of motorized operation.
Check Stock

Barnabas Robotics Servo Motor Tester Kit | 180 Degree 9g Servo Motor + RC Servo Tester Controller + 6V Battery Holder

  • [CONVENIENT, ALL-IN-ONE KIT FOR TESTING SERVO MOTORS] Experiment with servo motors with this all-inclusive kit. Includes 9g servo motor + servo tester controller + 6V battery holder at a low price!.
  • [9G Servo Motor] 180 degree range of motion. Includes 3 types of servo horns..
  • [4 CELL x AA BATTERY HOLDER] Fits 4 x AA batteries, which produces 6V for your servo tester and servo motors..
  • [SERVO TESTER] Includes 3 modes to test servo motors or ESC.
  • [GREAT FOR RC APPLICATIONS] Use as a power source for robotics, RC cars, helicopters, planes, boats and or any hobby projects.
Check Stock

Miuzei 10 Pcs SG90 9G Micro Servo Motor Kit for RC Robot Arm/Hand/Walking Helicopter Car Boat Control with Cable, Mini Small Servos for Arduino Project

  • Application Fields: Miuzei SG90 9G Servo Motor Compatible with Remote Control Helicopters, Micro Robot, Robot Arm and Boats. Support All Kind of R/C Toys and Arduino Experiments.
  • Interface Type: This SG90 Servo Compatible With JR & Futaba Interface. Miuzei Micro Servo 9g no Load Running Speed: 0.09±0.01 sec/60° at 4.8V.
  • Miuzei Micro Servo Motor Stall Torque (4.8V): 17.5oz /in (1kg/cm).
  • NOTE: The Starting Current of The Analog Servo Motor Should Be Over 1A and Miuzei Servo SG90 are Analog Servos Need to Continuously Provide a PMW Signal, Then it Will Be Work Normally.
  • How to Reach 180 degree -- Miuzei SG90 9g Servo Motor Need to Meet 4.8V Power Supply Voltage and 2500usec Pulse Signal, the Angle of Rotation.
Check Stock

FEETECH 35KG Servo Motor 360 Degree High Torque Digital Servo High Voltage Waterproof Metal Gear Aluminium Case for RC Helicopter Airplane Car Boat Robot Controls - FT6335M

  • HIGH QUALITY SERVO: FT6335M servo motor is composed of a sturdy PA aluminum middle shell, a strong steel metal gear, and a hard iron shaft, provide higher stability and provide longer service life..
  • GREAT COMPATIBLE MOTOR: The servo motor system is controlled by pulse, compatible with 1/8 and 1/10 scale RC robots, trucks, off-road vehicles, robotic arms, and any application that uses a standard servo system..
  • SERVO PROTECTION MECHANISM: The steering gear has IP54 waterproof performance and ball bearings.The output torque exceeds the overload torque, lasts 8S, or the temperature over 70 ℃, the steering gear will automatically stop the output torque. The overload torque can be modified..
  • HIGH ROTATION SPEED SERVO: A high-torque servo, the rotation angle is 360 degrees (at 500→2500μsec), when the power is stopped, it can rotate 360 degrees. Dead width ≤ 4 μsec. Durable and reliable..
  • STRONG STALL TORGUE MOTOR: The operating voltage range is 4V-8.4V, the stall torgue is (6V) 400.65oz/in(28.8kg/cm), (7.4V) 493.86oz/in(35.5kg/cm). The servo size is 55X20x43mm..
Check Stock

LAFVIN Project Super Starter Kit for R3 Mega2560 Mega328 Nano with Tutorial Compatible with Arduino IDE

  • Perfect choice for beginners to learn, electronics and program..
  • This kit with tutorial user manual containing more than 20 lessons,code,Libraries, datasheets, and so on..
  • Inlcude type motors and LCDs with servo motor, stepper motor and DC Motor.
  • LCD 1602, LCD 4-bit 7-segment Display etc..
  • LCD 1602 module with pin header (not need to be soldered by yourself).
Check Stock

4Pcs MG996R Servo Metal Gear Torque Digital Servo Motor for Smart Car Robot Boat RC Helicopter

  • MG996R Micro Servo motor, which updated from SG90 Micro Servo and MG90S micro servo motor. The speed, tension and accuracy all increase..
  • Compatible with most standard receiver connector: Futaba, Hitec, Sanwa, JR..
  • Torsional moment: 12kg/cm(6V), 13kg.cm.at(7.2V).
  • Stable and shock proof, metal gear, connector wire length 300mm..
  • Micro Servo Motor for 1:10 RC car robot helicopter servo remote controlled aircraft for DIY..
Check Stock

Electric CNC Linear Stage Actuator Linear Rail 200mm Stroke Cross Sliding Table SFU1605 Ballscrew C7 Slide Module for CNC Engraving Machine

  • 1. Motor seat can be replaced by Handwheel.
  • 2. It can be equipped with hand wheel, stepper motor, servo motor, AC motor, DC motor.
  • 3. It can organize cross, vertical, three-axis, four-axis gantry structure.
  • 4. The cushion is added before and after the sliding table to extend the service life of the sliding table..
  • 5. The front end increases the diagonal bearing seat, the sliding table has high precision and better stability..
Check Stock

ACEIRMC SG90 Servo Motor Micro Servo 9G Servo Motor for RC Robot Arm Helicopter Airplane Remote Control (5 Pcs) (5pcs)

  • SG90 9G micro servo motor for remote control helicopters, micro robot, robot arm and boats. Fit for ALL kind of R/C Toys and also make electronics DIY based on compatible for Arduino ,Raspberry Pi.
  • The SG90 mini servo motor is lightweight, high-quality and lightning-fast.The servo is designed to work with almost all the radio control systems..
  • SG90 Micro Servo Motor compatible for Mini Arduino Servo SG90 9g Servo Kit for RC Helicopter Airplane Car Boat Robot Arm/Hand/Walking/Servo Door Lock Control with Cable.
  • The SG90 has 3 wire interfaces in which the connections should be made as follows: Red wire-5V, Brown Wire-Ground, Yellow wire-digital pin 9..
  • Stall Torque (4.8V): 17.5oz /in (1kg/cm).
Check Stock

FURITEK Iguana 20A/40A Brushed ESC for AXIAL SCX24 with Bluetooth Combo

  • The FURITEK IGUANA esc is designed to work with BOTH stock brushed motor and sensored/sensorless brushless motors of your favorite on the Axial SCX24 crawlers..
  • Designed with FOC (Field-oriented control) technology, it provides insane slow speed with powerful stable torque, low noise, high efficiency, and has a high-speed dynamic response..
  • And with bluetooth module option, you can run telemetry and all amazing parameters on smart phone apps..
  • The difference between this IGUANA esc and TEGU Main Board for Axial SCX24 Crawler is that the TEGU main board includes servo out for extra application and LED control capability which the IGUANA does not have. The IGUANA also has smaller BEC than the TEGU..
  • - Support sensorless brushless DC and brushed DC motor (config via app, default is brushed).
Check Stock

FEETECH 35KG Servo Motor 7.4V High Voltage Waterproof High Torque RC Servo Full Metal Gear Digital Servo, Aluminium Case, Control Angle 180° for 1/8 1/10 RC Cars, TRAXXS x4, Baja, RC4WD, GTR and More

  • HIGH QUALITY SERVO: FT5330M servo motor is composed of a sturdy PA aluminum middle shell, a strong steel metal gear, and a hard iron shaft, provide higher stability and provide longer service life..
  • GREAT COMPATIBLE MOTOR: The servo motor system is controlled by pulse, compatible with 1/8 and 1/10 scale RC robots, trucks, off-road vehicles, robotic arms, and any application that uses a standard servo system..
  • SERVO PROTECTION MECHANISM: The steering gear has IP54 waterproof performance and ball bearings.The output torque exceeds the overload torque, lasts 8S, or the temperature over 70 ℃, the steering gear will automatically stop the output torque. The overload torque can be modified..
  • HIGH ROTATION SPEED SERVO: A high-torque servo, the rotation angle is 180 degrees (at 500→2500μsec), when the power is stopped, it can rotate 360 degrees. Dead width ≤ 4 μsec. Durable and reliable..
  • STRONG STALL TORGUE MOTOR: The operating voltage range is 4V-8.4V, the stall torgue is (6V) 400.65oz/in(28.8kg/cm), (7.4V) 493.86oz/in(35.5kg/cm). The servo size is 55X20x43mm..
Check Stock

RC Servo Tester Centering Tool ESC Motor Checker Built in BEC 3CH High Precision for Airplanes Remote Control Models

  • The Mini ECS Motor Servo Centering Tool can easily detect the clearance, jitter and median of a kind of Servo ..
  • With Good stability and high accuracy,could connect the ESC and test the working status of the ESC or Motor easily..
  • It is able to connect three sets of servo or ESC at the same time, use SCM to control..
  • Power Supply:ESC built-in BEC or UBEC(4-5 pcs of #5 battery) to Provides power to the tester..
  • FPV Drone RC Servo Tester High Precision ECS Motor Servo Centering Tool for Remote Control Models RC Airplanes..
Check Stock

[4-Pack] MG996R 55g Metal Gear Torque Digital Servo Motor for Futaba JR RC Helicopter Car Boat Robot

  • This MG996R Servo motor which updated from SG90 and MG90S micro servo motor. (the Speed, Tension and Accuracy all increase).
  • The MG996R model compliant with most standard receiver connector,for Futaba, Hitec, Sanwa, GWS etc..
  • Power Supply: Through External Adapter. Stable and Shock Proof. Coreless Motor , Metal Gear ..
  • Torque at 6V 12kg/cm, 7.2V 13kg/cm.(Recommended voltage: 5V, current usage: 3A ). Positioning speed at 4.8V without load 0.17s / 60 degrees.
  • Universally Applicable: Micro Servo Motor for 1:10 RC car robot helicopter servo remote controlled aircraft and suitable for most DIY projects..
Check Stock