Categories

Best Dcf899b 20v Max Xr

KIMGU N880093 anvil assembly replacement for DeWALT N415874 N4158745 DCF899 DCF899B DCF899M1 DCF899P1 DCF899P2

  • Replacement anvil, part number N415874 N866410.
  • Compatible with: DCF899B Type 1, DCF899B Type 3, DCF899M1 Type 1, DCF899M1 Type 3, DCF899P1 Type 1, DCF899P1 Type 3, DCF899P2 Type 1, DCF899P2 Type 3.
  • DCF899 Impact wrench conversion kit for N866410 DCF899B DCF899M1 DCF899P1 DCF899P2 DCF899H N415874 DCF899H.
  • Measures about 2.25 X 1.85 X 0.95 inches.
Check Stock

DEWALT 20V Max XR Cordless Drill Combo Kit, Brushless, 2-Tool (DCK283D2)

  • Brushless motor of cordless drill combo kit delivers up to 57% more runtime over brushed.
  • XR Lithium Ion batteries with fuel gauge in cordless tools combo kit provide 33% more capacity over standard packs.
  • DCD791 20V max 1/2-inch Drill/Driver in the drill/ impact driver combo kit has a compact (6.9-inch front to back) and lightweight (3.4 lbs.) design to fit into tight areas.
  • DCF887 20V max 1/4-inch Impact Driver has a compact (5.3-inch front to back) design to fit into tight areas.
  • DCD791 features a 3-mode LED with 20-minute trigger release delay in Spotlight Mode, providing increased visibility in dark or confined spaces.
  • DCF887 features 3 LEDs imbedded in front of tool with 20-second trigger release delay providing increased visibility in dark or confined spaces.
Check Stock

N415874 Replacementb Power Tool Detent Pin 1/2 Anvil Assembly Fits Dewalt 20V MAX XR Impact Wrench for DCF899 DCF899B DCF899M1 DCF899P1 DCF899P2 Pneumatic Wrench Anvil Driver Spindle Hammer Block

  • Compatible with: DCF899B Type 1, DCF899B Type 3, DCF899M1 Type 1, DCF899M1 Type 3, DCF899P1 Type 1, DCF899P1 Type 3, DCF899P2 Type 1, DCF899P2 Type 3.
  • Size(LxD): About 54x19.12mm/2.12x0.75inch.
  • Please allow 1-2 cm differences due to manual measurement..
Check Stock

Power Tool N415874 1/2-Inch Anvil Assembly Fits Dewalt 20V Max Xr Cordless Impact Wrench Kit,Detent Pin Anvil,Driver Spindle Hammer Block for DCF899 DCF899B DCF899M1 DCF899P1 DCF899P2 Impact Wrench

  • Compatible with: DeWalt DCF899B Type 1, DCF899B Type 3, DCF899M1 Type 1, DCF899M1 Type 3, DCF899P1 Type 1, DCF899P1 Type 3, DCF899P2 Type 1, DCF899P2....
  • Size(LxD): About 54x19.12mm/2.12x0.75inch.
  • Please allow 1-2 cm differences due to manual measurement..
Check Stock

DEWALT 20V MAX XR Cordless Impact Wrench Kit with Detent Pin Anvil, 1/2-Inch, Tool Only (DCF894B) & 20V MAX Battery Starter Kit with 2 Batteries, 5.0Ah (DCB205-2CK)

  • Product 1: Up to 330 ft lbs max of fastening torque at only 3.48lbs.
  • Product 1: Features precision wrench control. In forward the tool will pause before impacting to help prevent overtightening. In reverse the tool lowers speed when fastener is loose to help prevent run off.
  • Product 1: 3 mode settings to complete a variety of applications.
  • Product 1: Dewalt built Brushless motor for increased efficiency and runtime vs. Brushed DEWALT DCF894B 20V max* XR 1/2 in. Mid range cordless impact wrench with detent pin anvil (tool only).
  • Product 2: (2) 20V MAX 5.0Ah XR batteries, which provide up to 10 amp hours of capacity.
  • Product 2: Charges all 12V, 20V and 60V MAX batteries at a 4 amp charge rate.
  • Product 2: The Kit includes a soft bag for additional tool storage.
  • Product 2: Batteries come with a 3 year free service warranty.
Check Stock

DEWALT FLEXVOLT 60V MAX* Cordless Drill Combo Kit, Hammer Drill & Impact Driver (DCK299D1T1)

  • DCD996 20V MAX* 1/2-inch hammerdrill 3-speed, high performance (0-2,000 rpm), all-metal transmission in cordless tools combo kit optimizes tool-to-task for fast application speeds and improved run-time.
  • DCD996 20V MAX* 1/2-inch hammerdrill in the cordless tool set has 0-38,250 BPM for fast drilling in masonry materials.
  • DCD996 20V MAX* 1/2-inch hammerdrill in DEWALT tool kit has a compact size (8.4-inch front-to-back length) and lightweight (4.7 lb) design to fit tight areas.
  • DCD996 20V MAX* hammerdrill includes 3-Mode LED providing lighting in dark or confined spaces up to 20 times brighter than previous model.
  • DCF887 20V MAX* 1/4-inch impact driver provides 1,825 in-lbs of max torque at fast 0-3,250 RPM speed and 0-3,600 impacts per minute.
  • DCF887 20V MAX* 1/4-inch impact driver has a compact size (5.3-inch front-to-back length) and lightweight (3.4 lbs) design.
Check Stock

DEWALT 20V MAX* XR Cordless Drill Combo Kit, Brushless, 5.0-Ah, 2-Tool (DCK299P2)

  • DCD996 20V MAX 1/2-inch hammerdrill 3-speed, high performance (0-2,250 rpm), all-metal transmission optimizes tool-to-task for fast application speeds and improved run-time of the cordless drill combo kit.
  • DCD996 20V MAX 1/2-inch hammerdrill 0-38,250 BPM in the cordless tools combo kit is made for fast drilling in masonry materials.
  • DCD996 20V MAX 1/2-inch hammerdrill in the drill/impact driver combo kit has a compact size (8.4 inch front-to-back length) and lightweight (4.7 lbs) design to fit tight areas.
  • DCD996 20V MAX hammerdrill includes 3-Mode LED providing lighting in dark or confined spaces up to 20 times brighter than previous model.
  • DCF887 20V MAX 1/4-inch impact driver provides 1,825 in-lbs of max torque at fast 0-3,250 RPM speed and 0-3,600 impacts per minute.
  • DCF887 20V MAX 1/4-inch impact driver has a compact size (5.3-inch front-to-back length) and lightweight (3.4 lbs) design.
Check Stock

Makita HP2050 3/4\ Hammer Drill

  • The DCD999 DEWALT 20V hammer drill gets up to 42% more power** when paired with FLEXVOLT batteries.
  • Both cordless hammer drills are compatible with all DEWALT 20V MAX* and FLEXVOLT Batteries.
  • 20X BRIGHTER LED: The DCD999 3-mode LED provides lighting in dark or confined spaces up to 20x brighter than the DEWALT DCD985.
  • EXTENDED WORK TIME WITH LED: The DCD999 features an LED spotlight mode features 20 minute shutoff function allowing for extended work time in dark or confined spaces.
  • VERSATILITY: The DCF887 has application versatility with 3-speed settings.
  • ADDED CONTROL: The DCF887 helps prevent over-tightening fasteners with added control from Precision Drive in speed 1 setting.
  • VISIBILITY: The DCF887 creates visibility without shadows from 3 LEDs with a 20-second delay after trigger is released.
  • COMPATIBILITY: The DCB1106 6 Amp Charger is compatible with 20V MAX* batteries and FLEXVOLT 20V/60V MAX* batteries..
  • DCD999 is Tool Connect Chip Ready: Chip pocket accepts Tool Connect Chip DCE042 and connects with Tool Connect Site Manager app for easy asset management on the jobsite. (DCE042 sold separately).
Check Stock

DEWALT 20V MAX Combo Kit, Compact 4-Tool (DCK421D2)

  • DCD780 20V MAX 1/2-inch drill/driver features a two-speed transmission (0-600/0-2000RPM).
  • DCF885 20V MAX 1/4-inch impact driver features a 3-LED light ring with 20 second delay.
  • DCS393 20V MAX 6-1/2-inch circular saw features a powerful 460 MWO, 3700 RPM motor.
  • DCL040 20V MAX LED worklight delivers 110 lumens of light output.
  • (2) 20V MAX 2.0 Ah lithium-ion battery packs.
Check Stock

DEWALT DCK240C2 20v Lithium Drill Driver/Impact Combo Kit (1.3Ah) WITH 84pc Mechanics Tool Set

  • ERGONOMIC DESIGN: Lightweight tools designed to fit the users' needs.
  • INCREASED VISIBILITY: The DCF885 features a built in LED with 20 second delay after trigger release.
  • INCLUDES: (1) DCD771 Drill/Driver, (1) DCF885 1/4 in. Impact Driver, (2) 20V MAX* Lithium Ion 1.3 Ah Battery Packs, 20V MAX* charger, and (1) Kit Bag.
  • ONE HANDED BIT LOADING: THE DCF885 has a 1/4 in. hex chuck and accepts 1 in. bit tips.
  • ACCESS: The 72 tooth ratchet allows for a 5 degree arc swing allowing for greater access in tight spaces..
Check Stock

VANON 2Pack 20 Volt 6.0Ah Lithium Ion Batteries Replacement for Dewalt 20V Battery Max Compatible with DCB200 DCB201 DCB203 DCB204 DCB205-2 DCB206 DCB207 DCB230 Cordless Power Tools

  • 【Battery Specifications】Voltage: 20V MAX丨High Capacity: 6.0Ah/6000mAh丨Type: Premium XR Li-Ion丨Replacement for Dewalt 20V MAX XR Battery.
  • 【Perfect Compatibility】100% Compatible with Dewalt 20V Cordless Power Tools DCB200 DCB201 DCB203 DCB204 DCB205-2 DCB206 DCB207 DCB230 for Dewalt DCD/DCF/DCG/DCS series battery and original chargers..
  • 【Upgrade High Capacity】High capacity of 6000mAh makes your power tools run longer. LED indicator allows you to check the state of battery and allows user to monitor battery using..
  • 【Safe & Reliable】Our products are CE, FCC & ROHS certified and tested by manufacturers to match OEM products. No memory effect, it can be charged or discharged as needed without loss of capacity. Intelligent Protection against potential damage caused by over-charging, over-discharging, over-voltage, over-current, short-circuit..
  • 【Worry-free after-sales】 If the battery has quality problems within one year, it can be replaced for free or a full refund. If you have any questions about this item, please feel free to contact us. We will do our best to guarantee you a pleasant shopping experience..
Check Stock

SKIL 2-Tool Combo Kit: Pwrcore 20 Brushless 20V 1/2\ Heavy Duty Hammer Drill & Cordless Impact Driver, Includes 2.0Ah Lithium Battery & Pwrjump Charger - CB743801

  • The DCD999 DEWALT 20V hammer drill gets up to 42% more power** when paired with FLEXVOLT batteries.
  • Both cordless hammer drills are compatible with all DEWALT 20V MAX* and FLEXVOLT Batteries.
  • 20X BRIGHTER LED: The DCD999 3-mode LED provides lighting in dark or confined spaces up to 20x brighter than the DEWALT DCD985.
  • EXTENDED WORK TIME WITH LED: The DCD999 features an LED spotlight mode features 20 minute shutoff function allowing for extended work time in dark or confined spaces.
  • VERSATILITY: The DCF887 has application versatility with 3-speed settings.
  • ADDED CONTROL: The DCF887 helps prevent over-tightening fasteners with added control from Precision Drive in speed 1 setting.
  • VISIBILITY: The DCF887 creates visibility without shadows from 3 LEDs with a 20-second delay after trigger is released.
  • COMPATIBILITY: The DCB1106 6 Amp Charger is compatible with 20V MAX* batteries and FLEXVOLT 20V/60V MAX* batteries..
  • DCD999 is Tool Connect Chip Ready: Chip pocket accepts Tool Connect Chip DCE042 and connects with Tool Connect Site Manager app for easy asset management on the jobsite. (DCE042 sold separately).
Check Stock

Baseball HITTING Drills - ELITE: The Elite Drills & Batting Skills You Need to Compete (Baseball Hitting Book; Baseball Hitting Drills Book; Baseball Hitting Practice)

  • ERGONOMIC DESIGN: Lightweight tools designed to fit the users' needs.
  • INCREASED VISIBILITY: The DCF885 features a built in LED with 20 second delay after trigger release.
  • INCLUDES: (1) DCD771 Drill/Driver, (1) DCF885 1/4 in. Impact Driver, (2) 20V MAX* Lithium Ion 1.3 Ah Battery Packs, 20V MAX* charger, and (1) Kit Bag.
  • ONE HANDED BIT LOADING: THE DCF885 has a 1/4 in. hex chuck and accepts 1 in. bit tips.
  • ACCESS: The 72 tooth ratchet allows for a 5 degree arc swing allowing for greater access in tight spaces..
Check Stock