Categories

Best Decal Nema Motors

Bergen Industries Inc PS915143 3-Wire Appliance and Power Tool Cord, 9 ft, 14 AWG, 15A/125V AC, 1875w,Black

  • For use with MAJOR APPLIANCES, MOTORS and POWER TOOLS, U-Ground NEMA 5-15.
  • APPLICATION: SJTW: Hard SERVICE cord, THERMOPLASTIC/Vinyl constructed JACKET, 300 Volt, WEATHER RESISTANT for OUTDOOR USE.
  • IDEAL FOR appliances, motors and power tools.
  • APPLICATION: 9 Foot 14/3 cord with U Ground NEMA 5-15 plug and pigtail end.
  • APPLICATION: Rated For: 15 Amp, 125V, 1875 Watts max applications.
Check Stock

Bergen Industries Inc PS613163 3-Wire Appliance and Power Tool Cord, 6 ft, 16 AWG, 13A/125V AC, 1625w,Black

  • For use with MAJOR APPLIANCES, MOTORS and POWER TOOLS, U-Ground NEMA 5-15.
  • APPLICATION: SJTW: Hard SERVICE cord, THERMOPLASTIC/Vinyl constructed JACKET, 300 Volt, WEATHER RESISTANT for OUTDOOR USE.
  • IDEAL FOR appliances, motors and power tools.
  • APPLICATION: 6 Foot 16/3 cord with U Ground NEMA 5-15 plug and pigtail end.
  • APPLICATION: Rated For: 13 Amp, 125V, 1625 Watts max applications.
Check Stock

Stepper Motor Mounting Bracket, 6pcs Steel Motor Mounting Nema17 Bracket, with Mounting Screws

  • Mounts are thick 2mm metal bent into an L shape. spot-welded 2 little triangle-shaped wedges in the corners. Ideal for replacement applications..
  • Stepper motor bracket durable alloy steel provides strong bearing pressure when printing..
  • Nema17 brackets are 2 long slots so you could easily loosen screws, tighten the belt tension of the motor and belt, and tighten them back down easily..
  • Stepper motor alloy steel mounting bracket can match standard Nema 17 stepper motor, and also include the mounting holes for Nema 17 economy planetary geared stepper motor but not for high precision planetary geared stepper motor..
  • 6 pcs of NEMA 7 stepper motor mounting brackets, 90 degrees L-shaped bracket there are 4 holes drilled to mount for 3D Printer Motors Nema 17 Stepper Motor 42-40 Motor..
Check Stock

10:1 Planetary Gearbox 1/2\(12.7mm) Input Shaft for Nema 34 Stepper Motor 3000RPM Gearhead Gear Reducer CNC Benchtop Lathe Machine (10:1)

  • 1/2" (12.7mm) Input Shaft , connect directly with motors which has 12.7mm shaft.
  • Rated 30Nm high torque planetary gearbox ,10:1 speed reduction.
  • Nema34 flang, the gearbox must be screwed on the motor with the offer 4pcs screw to keep the concentricity. Very easy to install on motors, gearbox output shaft keyway dimension 5*5*25mm.
  • Rated speed is 3000RPM, precision less than 25 Arcmin.
  • This nema34 planetary gearbox mainly matches the stepper motor to reduce speed and increase torque. Widely used in CNC field on mill,lathe,bench,packaging machine etc..
Check Stock

4pcs Nema 23 Stepper Motor Steel Mounting Bracket with Mounting Screws

  • 4pcs of NEMA 23 stepper motor mounting brackets..
Check Stock

Nema 34 Stepper Motor Steel Mounting Bracket with Mounting Screws

  • NEMA 34 stepper motor mounting brackets..
Check Stock

Semiconductor Refrigeration Cooler, Stable Refrigeration Cooling System for Equipment

  • Use with NEMA Motor Frame Sizes 184T, 213T, 245T.
  • Can be used to mount NEMA motor frames and as IEC motors.
Check Stock

Twotrees Nema17 Stepper Motor 4 Lead Stepper Motor Nema 17 Motor with 1m Cable 42BYGH 38MM 1.5A 17HS4401S for CNC XYZ 3D Printer

  • High Torque: Twotrees stepper motor Adopting high quality motor steel material, is provided with high torque (42Ncm(60oz.in) ), low self-inductance....
  • Low Resistance: Twotrees stepper motor can get a lower resistance value compared to motors of the same thickness and torque. This considerably....
  • Wide Application: This small stepper motors can be used in various area, such as 3D printer.
  • Excellent Service : CE certified：Each nema 17 stepper motor has undergone a rigorous quality control ex works, can carry out a 24-month quality....
  • What Do You Get: The package includes 1* 38mm Stepper Motor/1pcs 1m 4pins cable and connector (Size: 42mm X 42mm X 38mm/1.65''x1.65''x1.49'' ,NEMA 17....
Check Stock

Thermoelectric Cooler,Energy Saving High Power Semiconductor Refrigeration Radiator Chiller Fan Water Cooling Device,Good Durability for Fish Tank (120W)

  • Can be used to mount NEMA motor frames and as IEC motors.
  • Use with NEMA Motor Frame Sizes 215T,254T 256T, 284T, 286T, 324T.
Check Stock

GOULDS Water Technology 10GBC10 High Pressure Multi Stage Booster Pump, 1 hp, Cast Iron, 1 Phase, Open Drip Proof Motor, 60 Hz, 115-230V, 10 Stage

  • Multi-stage Design: Provides steady, quiet, vibration free, operation.
  • O-Ring Casing Seal: Reliable high pressure sealing with easy disassembly for maintenance or repair.
  • Motors: Close coupled NEMA 56J motors in open drip proof or totally enclosed design. Single phase and three phase available.
  • Single phase motors have built-in capacitor and overload with automatic reset.
Check Stock

Furnace Draft Inducer/Exhaust Venter Motor Fits Jakel 1172823

  • Multi-speed, constant torque, brushless DC motor.
  • NEMA 48-frame (5. 6 inch diameter) belly band mount with 5-inch long 1/2 inch diameter shaft.
  • Four discrete speeds using 24VAC, plus automatic continuous fan speed.
  • Designed to replace direct-drive blower motors in residential and light commercial indoor furnaces, air handlers and package systems that were designed with a 6-pole 1075rpm rated PSC motor.
  • Replaces / Supersedes: American Standard & Trane MOT13004 , MOT-13004 , MOT12888 , MOT-12888 , MOT12292 , MOT12319 , MOT12542 , Carrier / ICP HD44AE137 , HD44AE137A , HD44AE138 , 1172987 , 1173682 , 5SME39HKL017 , 5SME39HXL285 , 5SME39HXL298 , S81-948 and other 1/2 HP X13 Constant Torque Motors from ALL Major Manufacturers as well as the Azure Digi-Motor # 10800..
  • DOES NOT REPLACE EON , 3. 0 , 2. 3 and 2. 5 ECM Motors.
  • 1/2 Horsepower , 208-230 VOLT , Universal X13 Replacement Motor.
Check Stock

FoxAlien Reizer 20W Desktop Laser Engraver Compressed Spot 32-bit Laser Engraving Cutter Machine for Wood MDF Ceramic Acrylic Metal 15.75x15.75 inches Large Work Area

  • 【0.08*0.12mm Laser Dot, 5W Optical Output】FoxAlien Reizer laser engraver equips with a 20W laser module (5W optical output). With the advanced....
  • Stable, Fast & Smooth】Reizer laser machine uses dual Y-axis motors. Two NEMA17 stepper motors ensure the machine run more stably....
  • 【Easy Assembly & Safety Protection】The machine is pre-assembly into several big parts. No complicated assembly of piece by piece. High quality....
  • 【Various Peripheral Products for Upgrade】15.75x15.75 inches (400x400mm) large engraving area meets daily DIY needs. Reizer is available for....
  • 【Wide Software Compatibility & Applications】FoxAlien Reizer is compatible with GRBL software, including Lightburn and Lasergrbl and supports file....
Check Stock

18/4 AWG Shielded CNC Wire (50FT) — Flexible Stranded Shielded 18-Gauge 4-Conductor Cable for Stepper Motors, CNC Machines, NEMA Motors, VFD Spindles, CNC Routers, 3D Printers and more!

  • RESILIENT & FLEXIBLE: Stepper motor cable designed to bend smoothly in your CNC or 3D printer chain!.
  • SHIELDED 4 CONDUCTOR WIRE: Reduce interference for your CNC spindle motor or stepper motor driver!.
  • BEST RESULTS: Shielded wire means higher quality for your 3D Printer, CNC Machine or CNC Controller..
  • GREAT FOR All STEPPER MOTORS: Nema 17 Stepper Motor, Nema 23 Stepper Motor, Stepper Driver, & more!.
  • STEPPER MOTOR WIRE: The perfect upgrade to any CNC Kit, CNC Router Kit, or CNC Stepper Motor Kit..
Check Stock