Categories

Best Decking Screw Gun

RainEscape Deck Drainage System Downspout - Black

  • Downspout used at the end of each trough to funnel rain and liquid into the gutter.
  • Quick and easy installation - requires only a utility knife, a staple gun and a caulk gun.
  • Downspouts are installed at the end of each deck bay.
  • Install on a 12 in. or 16 in. joist spacing.
  • Use on any joist material and with any brand of decking.
Check Stock

Metabo HPT SuperDrive Collated Screwdriver | 20\ Extension | 5/8\ to 3\ Screws | Ideal For Decking Installations | Drywall | Sub-Floor | Metal Framing | W6VB3SD2

  • Includes: W6VB3SD2 Collated Screwdriver, #2 Phillips Bit, #2 Square Bit, #2 LOX Bit, Decking Nose Piece.
  • POWER: Maximum speed of 2,600 RPM and an awesome torque rating of 139.6 in-lbs.
  • FASTENERS: Fastens screws from 5/8 In. to 3 In. and screw diameters from #6-#12.
  • APPLICATIONS: Decking and sub floor projects.
  • CORD: 24.6 Ft. cord that allows you to move around the jobsite without having to stop.
  • EXTENSION: 20 In. extension allows you to work from a grounded standing position without having to get down on the floor or stand on a ladder.
  • DEPTH ADJUSTMENT: Tool free depth adjustment: no need to reach in the tool box to change screw depth.
Check Stock

DEWALT 20V MAX* XR Drywall Screw Gun Collated Magazine Accessory (DCF6201)

  • Drywall screw gun has a tool-free screw length adjustment button (1-inch - 2-inch capacity).
  • DEWALT drywall screw gun has disassembly release button (for occasional blow-out/cleaning).
  • The drywall gun has screw length detent marks and screw drive depth gauge.
Check Stock

Plastic Deck Clips Pack of 30 | Universal Plastic Decking Fasteners & Metal Deck Screws | Deck Clips for Composite Decking Boards | Plastic T Clips for Decking | Universal Deck Fastener Clips System

  • WHAT’S INCLUDED- Each order includes 30 plastic deck T clips, 30 stainless steel deck screws, 1 square install bit, as well as detailed installation instructions..
  • EASILY INSTALLED - These fastening porch deck clips allow for the installation to be done above the wood decking framework and installs in a variety of grooved composite deck boards. Instructions for installing these hidden fastener clips are included..
  • PROFESSIONAL RESULTS- These plastic deck t clips help achieve a seamless, fastener-free composite decking making them the best universal decking fasteners available. The stainless steel deck screw are set in the fastener for easier installation..
  • CONTRACTOR, COMMERCIAL & LARGE PROJECTS WELCOMED- We always offer discounts when purchasing 5 or more of any of our products..
Check Stock

DEWALT Drywall Screw Gun Collated Attachment DCF6202

  • Slim nose and removable shoe of the drywall screw gun allows for easy access into tight corners..
  • Full 360-degree rotation on DEWALT screw gun allows users to choose best positioning for application.
  • Tool-free screw length adjustment with detent marks allow for easy and clear setup for varying screw lengths.
  • Tool-free spring removal allows for easy cleaning of attachment.
  • Release button allows for tool-free attachment and removal from screw gun.
Check Stock

DEWALT Screw Gun Kit with Collated Drywall Attachment DCF620CM2

  • Slim nose and removable shoe of the drywall screw gun allows for easy access into tight corners..
  • DEWALT screw gun lock-on feature enables fast installation of collated drywall screws.
  • Full 360 degree rotation on screw gun allows users to choose best positioning for application.
  • Tool-free screw length adjustment with detent marks allow for easy and clear setup for varying screw lengths.
  • Tool-free fine-depth adjustment allows for consistent screw installation at varying depths.
Check Stock

304 Stainless Steel Start Clips Black Deck Clips Universal Decking Clips with Decking Screws for Composite Deck Boards, Hidden Fasteners (40)

  • Stainless Steel Material: starter clips are made of quality 304 stainless steel, strong texture, corrosion resistance, not easy to fade or break, suitable for outdoor installation, can play a nice fastening effect, to provide you with long term service.
  • Use Occasion: composite decking starter clips are applied to install composite decking with grooves on the sides, which conceal themselves while holding the deck in place, making them practical and attractive.
  • Installation Method: place the hidden deck fasteners for composite on the floor joists and fix them with screws, one every 12 to 16 inches, then push the floor into the card, easy to apply, will not waste a lot of your time and effort.
  • Rich Quantity to Meet Your Needs: the package includes 40 pieces of hidden deck clips, plenty quantity to meet your use demands, replacement demands and sharing demands, can give you a nice shopping experience.
  • Equipped with Screws: each starter clips for composite decking comes with a suitable stainless steel screw, easy to install, which can save you the trouble of buying screws and bring you a nice use experience.
Check Stock

Kraft Tool HC501 Hi-Craft Texture Gun and Hopper

  • Gun has 2 air nozzles, adjustable orifice plate, and locking trigger system.
  • Sprays drywall textures such as stucco and decking material.
  • Operates on 6.25 CFM free air at 25 PSI..
Check Stock

#8 x 1-1/4 Deck Screws 316 Marine Grade Stainless Steel Square Drive Type 17 Wood Cutting Point Quantity 100 Size Number 8 x 1-1/4 Long by Fastenere

  • Screw Size #8 (0.164") - Straight Pilot Drill size for Soft Wood 7/64 . Straight Pilot Drill size for Hard Wood 1/8.
  • Screw length measured from top of flat to tip of screw 1-1/4" (1.25") - Screw head Diameter 0.340".
  • Made of highly corrosion resistant 316 Marine Grade Stainless Steel. Type 316 is also used extensively for surgical implants within the hostile environment of the body..
  • Deck screws have a type-17 (auger type) thread cutting tip for installation into decking materials. They have bugle heads that allows the screw to depress the wood surface.
Check Stock

Myard Universal Hidden Deck Fastener Clips for Grooved Edges of Composite Decking Boards to Joists, 1/4' Gap Spacing, with Square Driver Bit (50-Pack)

  • ... + Dacromet black coating) are included. Saving time and money. ▼ Made of anti-UV engineering Nylon plastic. No corrosion. ▼ Includes 1 Square Driver Bit: Size 0.09″ x 0.09″ (2.3mm x 2.3mm).
  • ▼ Clean-look and consistent 1/4″ deck board spacing. No more predrilling and countersinking. ▼ Decking grooved edges “C” opening must be 0.15″ or bigger..
  • ▼ Compatible with AZEK, Cali-Bamboo, Deckorators, DuraLife, Envision, EverNew, Fiberon, MoistureShield, Lumberock, TimberTech, Trex, WearDeck, Zuri branded edge-grooved composite, hardwoods, treated lumber, cedar, & vinyl deck boards..
  • ▼ INSTALLATION: (1) Insert a Myard hidden fastener clip into the grooved edges of decking over a joist. (2) Drive the screw ONLY halfway (Fully tighten later once all boards are in place). The wings must remain level with the joist for the next board to fit correctly. (3) Continue to add clips on each joist against deck boards..
  • ▼ INSTALLATION: (4) Install “next” boards, make sure boards are pressed firmly against the clips and secured under the wings. (5) Do NOT over-tighten the screws. Please set proper driver torquing (2 to 6 drill power). The screw head will be resting on the top of the clip, but not sinking into the clip..
Check Stock

Myard Universal Hidden Deck Fastener Clips for Grooved Edges of Composite Decking Boards to Joists, 1/4' Gap Spacing, with Square Driver Bit (100-Pack)

  • ... + Dacromet black coating) are included. Saving time and money. ▼ Made of anti-UV engineering Nylon plastic. No corrosion. ▼ Includes 1 Square Driver Bit: Size 0.09″ x 0.09″ (2.3mm x 2.3mm).
  • ▼ Clean-look and consistent 1/4″ deck board spacing. No more predrilling and countersinking. ▼ Decking grooved edges “C” opening must be 0.15″ or bigger..
  • ▼ Compatible with AZEK, Cali-Bamboo, Deckorators, DuraLife, Envision, EverNew, Fiberon, MoistureShield, Lumberock, TimberTech, Trex, WearDeck, Zuri branded edge-grooved composite, hardwoods, treated lumber, cedar, & vinyl deck boards..
  • ▼ INSTALLATION: (1) Insert a Myard hidden fastener clip into the grooved edges of decking over a joist. (2) Drive the screw ONLY halfway (Fully tighten later once all boards are in place). The wings must remain level with the joist for the next board to fit correctly. (3) Continue to add clips on each joist against deck boards..
  • ▼ INSTALLATION: (4) Install “next” boards, make sure boards are pressed firmly against the clips and secured under the wings. (5) Do NOT over-tighten the screws. Please set proper driver torquing (2 to 6 drill power). The screw head will be resting on the top of the clip, but not sinking into the clip..
Check Stock

Max HN120 PowerLite Concrete Nailer

  • ✅ Shoots 14 gauge T-nails from 5/8'' to 2-1/2'' long | Hardened driver | Convenient side-load magazine | Rubber hand grip for added comfort | Heavy-duty light weight aluminum body | Adjustable exhaust.
  • ✅ Soft grip handle reduces fatigue | Touch-strike security system is safe for the operator | Available with either sequential and contact fire trigger | Quick-release nosepiece for fast clearing of jams | Rubber can protect the surface of the gun when the gun fall.
  • ✅ Magazine Capacity: 100 | Operating Pressure: 80-100 PSI | Air Inlet: 1/4" | Fastener Size: 14 Gauges - 0.087" Diameter | Fastener Type: T-Nails (both hardened & galvanized) | Fastener Length: 5/8" - 2-1/2" Long Nails.
  • ✅ Includes: Concrete T-Nailer | Cardboard box.
  • ✅ Wood to concrete & masonry furring | Plywood to concrete nailing | Light gauge steel drywall track to concrete | Wire lath to masonry | Steel banding to wood | Wood to light gauge steel (up to 3/16") | Decking | Fencing | Sub flooring | General construction.
Check Stock

Gmconn Tactical Gun Light and Green Laser Sight Combo 650 Lumens, Flashlight Laser Combo for Pistol, Strobe Weapon Light with Green Laser for Gun with 21MM Width Picatinny Rail

  • ✅【ONLY ONE Screw + 21MM Width Rail】There are two alternative screw holes, choose one for your preference and use the ONLY ONE SCREW to install the Gmconn gun light/laser in a perfect location on your 21MM width standard rail with screw slot. Kindly be noted that the “clear space” between your first rail screw slot and the trigger guard should be at least 1.16 inch..
  • ✅【Multiple Modes】 650 Lumens Strobe flashlight and laser combo for pistol offers Steady/Strobe Gun light modes. Working modes: Steady/Strobe gun light, Pistol laser Only, Steady/Strobe Flashlight+ Gun Laser..
  • ✅【Rechargeable & Portable】The flashlight laser combo is powered by a built-in rechargeable battery. A full charge takes 1.5 hours by USB cable and providing 5 hours’ laser for gun. Red light indicating for low battery..
  • ✅【Durable Aluminum Alloy Design】Flashlight laser for pistol is made of durable Aluminum alloy, which is light weight and ultra compact. Dimension: L2.36”*W1.18”*H1.57”.
  • Weight: 89g(3.12 oz). Mini size but powerfully functioning..
Check Stock