Categories

Best Decorative Joist Hanger Brackets

4 Pcs 2x4 Concealed Joist Hanger Fit Actual 1.9 x3.5 Outdoor Concealed-Flange Light Joist Bracket Q235B Steel Powder-Coated Concealed Face Mount Joist Hanger for Beam Swing,Fence,Handrail

  • FIT: Concealed joist hanger fits perfectly on 1.9" x 3.5" lumber (ALSO FITS FOR WOOD OF 1.5"-2"/ 38-50 mm WIDTH). For rough cut measured lumber, not nominal..
  • ACTUAL SIZE: 2-1/5"(L) x 2"(W) x 3-3/4"(H). Thickness: 3 mm. Two types of prepunched hole size: φ5 mm (6 pcs), φ8 mm (2 pcs).
  • STURDY MATERIAL: Heavy Joist Hanger Bracket is made of heavy duty steel, smooth look, coated with black powder to prevent rust and corrosion outdoor in all seasons and climates..
  • SPECIAL DESIGN: The holes on the concealed joist bracket are deliberately offset, so you can put in one screw from each side without hitting the other screw, make it stronger..
  • WIDELY USE: Concealed-flange joist hanger bracket can be installed close to the end of the beam, swing, fence and handrail as a stable support kit. Perfect for indoor or outdoor usage, such as home, garden, barn etc, match your decor..
Check Stock

Hang Em Fast Easy Joist Hanging Tool - Hang Man Tool - 2x4 2x6 2x8 2x10 2x12 Metal Joist Hanger - Light Weight Durable Ergonomic Design

  • PLEASE NOTE - Due to supply constraints on lumber, it has been noticed that many "standard" board dimensions have not been entirely accurate. Please....
  • FAST, SAFE, EASY - The most accurate way to install joist hangers..
  • HOW TO USE - Simply slide the hanger into the tool, line the tool up with the ledger board, then nail on the hanger..
  • BEAM SIZES - Works with 2"x4", 2"x6", 2"x8", 2"x10", 2"x12" joist hangers.
Check Stock

4 Pcs Split Joist Hanger Structural-Connectors Face Mount All 6 Face Mount Joist Hanger 16 Gauge Hot Dip Galvanized Finish Steel Joist Dimensional Hangers

  • Material :Carbon steel Q235B , hot-dip galvanized surface treatment, good impact resistance, wear resistance, corrosion resistance.
  • Split Joist Hanger are designed to provide support underneath the joist, rafter or beam to provide a strong a connection.Suitable for all sizes of wood.
Check Stock

Simpson Strong-Tie U Galvanized Face-Mount Joist Hanger for 2x6 Rough (Pack of 50)

  • Features speed prongs, which locate the hanger on the header.
  • Provides flexible, face-mounted joist-to-header installation.
  • Galvanized (G90) for extra corrosion resistance.
Check Stock

Squeak Ender 2084 Hardwood Floor / Subfloor Squeak Eliminator Brackets - Quantity 4

  • Quantity of (4) : Squeak Ender Floor Squeak Eliminator Brackets # 2084.
  • Quickly and permanently eliminate annoying wood floor squeaks.
  • This kit installs from beneath the floor and works by pulling the loose sub-floor tight to the joist ..
  • Each Kit Includes (1) 4″ adjustable floor joist bracket, (1) 2″ square floor anchor plate, (1) 1/4-20 x 6 inch carriage bolt, (1) 1/4-20 hex nut, (1) 1/4 washer and (4) #10 x 5/8″ sub-floor wood screws.
Check Stock

Squeak Ender 2084 Hardwood Floor / Subfloor Squeak Eliminator Brackets - Quantity 6

  • Quantity of (6) : Squeak Ender Floor Squeak Eliminator Brackets # 2084.
  • Quickly and permanently eliminate annoying wood floor squeaks.
  • This kit installs from beneath the floor and works by pulling the loose sub-floor tight to the joist ..
  • Each Kit Includes (1) 4" adjustable floor joist bracket, (1) 2" square floor anchor plate, (1) 1/4-20 x 6 inch carriage bolt, (1) 1/4-20 hex nut, (1) 1/4 washer and (4) #10 x 5/8" sub-floor wood screws.
Check Stock

Squeak Ender 2084 Hardwood Floor / Subfloor Squeak Eliminator Brackets - Quantity 24

  • Quantity of (24) : Squeak Ender Floor Squeak Eliminator Brackets # 2084.
  • Quickly and permanently eliminate annoying wood floor squeaks.
  • This kit installs from beneath the floor and works by pulling the loose sub-floor tight to the joist ..
  • Each Kit Includes (1) 4" adjustable floor joist bracket, (1) 2" square floor anchor plate, (1) 1/4-20 x 6 inch carriage bolt, (1) 1/4-20 hex nut, (1) 1/4 washer and (4) #10 x 5/8" sub-floor wood screws.
Check Stock

Squeak Ender 2084 Hardwood Floor/Subfloor Squeak Eliminator Brackets - Quantity 13

  • Quantity of (13) : Squeak Ender Floor Squeak Eliminator Brackets # 2084.
  • Quickly and permanently eliminate annoying wood floor squeaks.
  • This kit installs from beneath the floor and works by pulling the loose sub-floor tight to the joist ..
  • Each Kit Includes (1) 4" adjustable floor joist bracket, (1) 2" square floor anchor plate, (1) 1/4-20 x 6 inch carriage bolt, (1) 1/4-20 hex nut, (1) 1/4 washer and (4) #10 x 5/8" sub-floor wood screws.
Check Stock

Squeak Ender 2084 Hardwood Floor/Subfloor Squeak Eliminator Brackets - Quantity 9

  • Quantity of (9) : Squeak Ender Floor Squeak Eliminator Brackets # 2084.
  • Quickly and permanently eliminate annoying wood floor squeaks.
  • This kit installs from beneath the floor and works by pulling the loose sub-floor tight to the joist ..
  • Each Kit Includes (1) 4" adjustable floor joist bracket, (1) 2" square floor anchor plate, (1) 1/4-20 x 6 inch carriage bolt, (1) 1/4-20 hex nut, (1) 1/4 washer and (4) #10 x 5/8" sub-floor wood screws.
Check Stock

6 PCS Deck Joist Tie, Steel Z Bracket Tie Plate Fit 2x4 Cross Joist and 4x4 Post , 14 Gauge Metal Joint Corner Brace Support Pergola Brackets for Roofing Trusses Wood Timber Connectors

  • 6 PCS Z Brackets Deck Joist Tie Plate, Carbon Steel + Hot Dip Galvanized.
  • Fit minimum 2"x4" joist and 4"x4" post.Applicable beam thickness: 1½-1⅝ inches (38-40mm).
  • Length: 3¼"(82 mm), Height: 1½"(38 mm), Width: 3"(76 mm), Thickness: 14 Gauge (2 mm).
  • Mounting Holes Size: Φ4mm,Φ13mm,Φ10.5 mm.
  • Pergola Brackets Post to Beam Connectors. Anti-corrosion, wear resistance, anti-rust. Smooth surface and edges without burrs..
Check Stock

SKOLOO Accordion Wall Hanger, Modern Expandable Coat Rack Wall Mounted, Solid Wooden Wall Hat Rack, 14 Peg, Walnut

  • 【High-quality & Sturdy】Solid wooden accordian wall hanger with lots of pegs,14 pegs hooks,smooth surface finish..
  • 【Accordion Wall Hanger】Expandable coat rack wall mounted, accordion hanger with modern decorative style..
  • 【Large Space Saving】Accordion wall hanger walnut,a nice darker color & 3/8'' thick.16-inch length, maximum extension to 57 inch wide, larger hat rack for wall..
  • 【Enough Metal Brackets】Come with metal hanging brackts to fix on the wall, adapt to 180 ° rotation. Easy to install..
  • 【Longer Wood Pegs】A large enough top-to-bottom to have plenty of space between the top & bottom pegs that line up to hang shorter necklaces, coffee mugs,hats, baseball caps, coats, nursery backpack,wall pedments..
Check Stock

KABB 2 PCS Metal Hanging Hook Plants Brackets, 12 Inch Iron Wall Mount Bracket Durable Rust-Resistant Plant Hanger Hook for Hanging Plants Bird Feeder Lantern Wind Chimes

  • DECORATE YOUR HOUSE MORE BEAUTIFULLY: with the unique nostalgia of vintage iron art for compatible decorative, this wall hanging brackets is very great for hanging various flowers, plants, wind chimes, lanterns, bird feeder holiday decorations, string lights and other ornaments to create a landscaping space and charming atmosphere to your home garden place..
  • STYLISH DESIGN: The hanging plant hook made of iron material in good craftsmanship which will not rust or melt under heat, also the surface processed by retro-style distressed treatment. Exquisite and cute leaf shape design to add extra chic and elegance. Looks great within a variety of different environments..
  • STABLE & ROBUST HANGER PLANTER HOOKS: Simple shape and high-strength welding process to provide high load capacity (60lb) and offer the safest protection for your heaviest pots and baskets or other pendants, which is very perfect for home and garden installation, such as balcony, yard, porch, garden fence, etc..
  • EASY INSTALLATION: The nail holes at both ends of the plant hanger Bracket are easy to install. Equipped with screws for mounting and fixing, very st....
Check Stock

SKOLOO Accordion Wall Hanger, Modern Expandable Coat Rack Wall Mounted, Solid Wooden Wall Hat Rack, 14 Peg, Black on White

  • 【High-quality & Sturdy】Solid wooden accordian wall hanger with lots of pegs,14 pegs hooks,smooth surface finish..
  • 【Accordion Wall Hanger】 Expandable coat rack wall mounted, accordion hanger with modern decorative style..
  • 【Large Space Saving】Accordion wall hanger-black on white,a nice paint white color & 3/8'' thick.16-inch length, maximum extension to 57 inch wide, larger hat rack for wall..
  • 【Enough Metal Brackets】Come with metal hanging brackts to fix on the wall, adapt to 180 ° rotation. Easy to install..
  • 【Longer Wood Pegs】A large enough top-to-bottom to have plenty of space between the top & bottom pegs that line up to hang shorter necklaces, coffee mugs,hats, baseball caps, kids coats, adults coats, nursery backpack,wall pedments..
Check Stock