Categories

Best Defender Suspension Lift

LEGO Technic Land Rover Defender 42110 Building Kit (2573 Pieces)

  • Fans of LEGO Technic sets and Land Rover vehicles will enjoy an immersive and rewarding building experience with this highly authentic LEGO Technic Land Rover Defender replica, packed with realistic features and functions.
  • This collectible model of the quintessential 2019 Land Rover Defender really captures the vehicle’s level of refinement with its clean, modern lines and sculpted surfaces, making it a great display piece for the home or office.
  • Developed in partnership with Land Rover, this building toy has working steering, 4-speed sequential gearbox, All Wheel Drive with 3 differentials, independent suspension, detailed in-line 6-cylinder engine and a working winch.
  • Cabin features a detailed dashboard, working steering wheel, gear section with 2 levers for engaging high or low gear ratios and a selector for changing gear, plus forward-folding seats for visual access to the gearbox.
  • This 2,573-piece LEGO Technic Land Rover Defender 42110 delivers an immersive building experience and makes an ideal Christmas or birthday gift for all aged 11+. Measures over 8-inch (22cm) high, 16-inch (42cm) long and 7-inch (20cm) wide.
Check Stock

Readylift 66-5002 ReadyLift 2.0 Tall Rear Kit Silver

  • FITMENT: Lift kit for 2005 - 2019 Toyota Tacoma (2WD & 4WD). Does NOT fit 5-Lug or TRD Off-Road models. Simple installation in 2 to 4 hours for....
  • TACOMA SUSPENSION LIFT: This leveling kit will sustain your original ride quality with minimal effect on your truck’s center of gravity to maintain....
  • INCREASE GROUND CLEARANCE: Raise your Tacoma 3" in the front and 2" in the rear. Improve the look of your truck and increase ground clearance,....
  • ALL HARDWARE INCLUDED: Comes with 2 x 3" aircraft billet front strut spacers, 2 x 2" aircraft billet rear lift blocks, 4 extended zinc-plated U-bolts.....
  • TECHNICAL NOTES: Please note: Lift spacer thickness and lift is not a 1 to 1 ratio due to the suspension geometry. Wheel alignment is recommended....
Check Stock

X AUTOHAUX 2 Inch Front Suspension Spring Strut Spacer Leveling Lift Kit for Nissan Titan 2004-2015 2017-2020

  • Fitment: for Nissan Titan 2004-2015 (Does not for PRO-4X), for Nissan Titan 2017-2020 (Does not for PRO-4X), for Nissan Armada 2005-2015, for Nissan Titan XD 2016 (Does not for PRO-4X).
  • REAL LIFTING HEIGHT: 2", Actual Thickness: 3cm / 1.18". Lift Spacer Thickness and Lift is not a 1:1 Ratio due to the Suspension Shape. The actual thickness of the spacer is thinner than 2 inch front, but these spacers will raise the front end of your truck by a True 2 inch Front..
  • Leveling Kit Feature: The leveling kit raise the front of your pickup to even out the overall body of the vehicle and gives you extra room for larger tires. The spacer is CNC machined out of quality billet aluminum to match your suspension..
  • Easy Installation: In comparison to a suspension lift kit, leveling kits are easy to install. Other than that, you maintain the same steering feel, shock absorption, and handling that you had before we install the leveling kit..
  • Package Included: 2 x Front Suspension Leveling Spacers, 6 x Bolts, 6 x Screws, 12 x Washers..
Check Stock

WULF 2.5' Front 2' Rear Leveling Lift Kit compatible with 1998-2012 Ford Ranger 2WD with Coil Spring Suspension

  • Compatible with 1998-2012 Ford Ranger 2WD with Coil Spring Suspension.
  • FRONT: 2.5" Lift Solid Aluminum Coil Spring Spacers.
  • REAR: 2" Lift Ductile Cast Steel Angled Blocks, (4) Zinc Coated U-bolts, Hardware Included.
  • NOTE: 2WD models only. Requires coil spring suspension. Strut Spacers are not a 1:1 ratio regarding physical thickness to the amount of lift, they will lift the advertised amount Please see the description for full details, or contact us for assistance.
  • Fast Shipping. Manufacturers Lifetime Warranty. Dedicated Customer Service.
Check Stock

Mr Hardcore/Gal A Go/Hey Diddle Diddle/Wheel Cart

  • 6" Club Car PRECEDENT 6” Heavy Duty Double A-Arm Suspension Lift Kit and 14" Black 'LANCER' wheels with mounted All-Terrain tires, center caps, and lug nuts..
  • Fits: Club Car Precedent electric and gas models (2004+).
  • Includes: 6” Heavy Duty Double A-Arm Suspension Lift Kit, (4) 14"x7" Black 'LANCER' Aluminum Alloy Wheels that come mounted with 23"x10"-14" DOT rated All-Terrain tires, Black 'SS' Center Caps, and (16) Black 1/2x20 Lug Nuts. All Lift Kit Hardware, step by step instructions, estimated 1-3 hours installation.
Check Stock

Performance Accessories Dodge Ram 1500/2500/3500 Gas 2WD and 4WD Except 99-00 Sport 3 Body Lift Kit fits 1997 to 2001 PA673 Made in America

  • Provides 3-inches of lift without modifying existing suspension components.
  • Allows use of larger diameter tires and factory rims for improved ground clearance.
  • DOES NOT alter the OEM suspension geometry or factory stability control parameters.
  • Keeps the truck's center of gravity lower than a comparable suspension lift.
Check Stock

GAsupply 2 Lift Kit Set of 4 Brackets Compatible with 2016-2020 Can Am Defender 500 800 1000

  • 【NOTE】 Will raise your Defender 2 inch ..
  • 【COMPATIBILITY】 Compatible with 2016-2020 Can Am Defender 500 800 1000.
  • 【BENEFITS】 This leveling lift kit can gain additional ground clearance to make the vehicle look more aggressive.You can install bigger, wider....
  • 【FEATURES】 The leveling kit is forged from lightweight aluminum, which is stronger and more durable. 10.9 grade bolts bring a more solid and....
  • 【INSTALLATION】 Installation is simple, but professional installation is still recommended.
Check Stock

Supreme Suspensions - 3.5" Front + 3" Rear Lift Kit for 2007-2019 Chevy Silverado/GMC Sierra 1500 2WD/4WD - Full Suspension Lift Kit with Rear Shock Mount Extenders (Black)

  • ...(6-LUG - 2WD 4WD). *Does NOT fit 2007 Classic / TrailBoss / AT4 Models, 2015+ vehicles equipped with factory stamped steel UCA, or 2019 models with 5/8 Rear Center Pin. This kit is NOT compatible with models equipped with Adaptive Ride Control / MagneRide / Auto-Ride / Air-Bag / Air-Ride, or any other Self-Leveling Suspension System..
  • NOTE FOR Z71 / LTZ OWNERS: *Some LTZ/Z71 Models have factory rear blocks pre-installed! Rear lift height will vary depending on the size of the factory block being replaced by our lift blocks. Please check block size before ordering as our lift block is intended to replace any factory equipped blocks..
  • TECHNICAL NOTES: 3.5 inch front and 3 inch rear suspension lift. *Please note that front spacer thickness to lift height is not a 1:1 ratio. IMPORTANT NOTE: Installation of Aftermarket Uniball UCA is highly recommended after lifting the front end by 2.5", or more. The upper ball joint will wear out rapidly with use of stock UCA..
  • HIGH-QUALITY SUSPENSION LIFT KIT: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires. After an easy....
Check Stock

Madjax Lo-Pro 2004-Up Lift Complete Kit for Club Car Precedent Golf Carts

  • 6" Club Car PRECEDENT 6” Heavy Duty Double A-Arm Suspension Lift Kit and 12" Black 'DARKSIDE' wheels with mounted All-Terrain tires, center caps, and lug nuts..
  • Fits: Club Car Precedent electric and gas models (2004+).
  • Includes: 6” Heavy Duty Double A-Arm Suspension Lift Kit, (4) 12"x7" Black 'DARKSIDE' Aluminum Alloy Wheels that come mounted with 23"x10.5"-12" All-Terrain tires, Black 'SS' Center Caps, and (16) Black 1/2x20 Lug Nuts. All Lift Kit Hardware, step by step instructions, estimated 1-3 hours installation.
Check Stock

NEXUS SUSPENSION 4" Lift Coil Spring&Shock Absorber Lift Kits For Jeep Grand Cherokee ZJ 1993-1998,4" Suspension Lift Kits for Jeep Grand Cherokee ZJ

  • NEXUS SUSPENSION 4" Lift Coil Spring&Shock Absorber Lift Kits For Jeep Grand Cherokee ZJ 1993-1998,4" Suspension Lift Kits for Jeep Grand Cherokee ZJ.
  • 4" Lift Front Shocks for Jeep Grand Cherokee ZJ 1993-1998,Collapsed Length: 15.59" (396.00mm),Extended Length: 26.18" (665.00mm)..
  • 4" Lift Rear Shock Absorber for Jeep Grand Cherokee ZJ 1993-1998,Collapsed Length: 15.59" (396.00mm),Extended Length: 26.18" (665.00mm)..
  • Zinc Plated Smooth Body Finish,In Order to Maintain the GLADIATOR JT Shock Absorbers' Luster,Wax or Lubrication ,Oil Service to Prevent Tarnishing..
  • Nitrogen Gas Pressure Twin Tube Shocks design ensure enhanced durability, Designed Specifically for Lifted Jeep Ford Dodge Chevy GMC Toyota etc..
Check Stock

Liftcraft - Fits 2006-2020 Dodge Ram 1500 Lift Leveling 3.5 Inch Front Kit 4WD 4x4

  • FITMENT: For 2006 - 2020 Dodge Ram 1500 4WD Models | NOTE: Will not Fit TRX, Mega Cab, Ram Rebel or Warlock Models | Will Not Fit trucks equipped with Four-Corner Air Suspension.
  • MATERIAL: Premium 6061T6 aircraft aluminum spacers with ideal strength and weight.
  • INSTALLATION: Bolt-on kit, only takes a couple of hours to install.
  • CONTENTS: Aluminum Strut spacers (2), Hardware and Detailed Instructions - Liftcraft suspension lift and leveling kits are designed to offer a safe and easy way to improve the look of your truck and run larger-diameter wheels and tires without compromising your vehicle's ride quality..
Check Stock

maXpeedingrods 2.5" Lift Kit for Jeep Grand Cherokee WK2 2011-2022, for Dodge Durango 2011-2022 Front Rear Suspension Lift Kit

  • [Application] Lift kit fits for Dodge Durango 2011-2022 2WD/4WD, for Jeep Grand Cherokee WK2 2011-2022 2WD/4WD. Does not fit models with Air-Ride Suspension.
  • [Durable Material] Suspension lift kit is made of high-strength steel with good finish to resist rust and corrosion for an extended lifespan.
  • [Front & Rear Lift] 2.5” lift kit gives your vehicle higher ground clearance to fit larger tires and rims and accommodates tires up to 33".
  • [Trustworthy Replacement] Installation will take approximately 1-2 hours. No cutting, welding or other parts are required. No need to trim factory studs.
  • [Premium Service] We are committed to providing every customer with high-quality products. If you require any further information, feel free to contact us anytime.
Check Stock

10L0L Golf Cart 6 inch Heavy Duty A Arm Lift Kit for Club Car Precedent 2004-up Electric or Gas

  • 6" A-Arm spindle lift kit for Club Car Precedent 2004-up gas and electric, allows for up to a 23" tall tire.
  • Increase suspension travel providing a smoother off-road experience.
  • Includes front and rear lift, no cutting and no weld design, includes hardware and instructions.
  • Recommend professional installation, takes an estimated 1-3 hours to install.
  • Kit includes: 1 x main suspension assembly, 2 x spindles, 2 x a-arms, 2 x rear lift blocks, 2 x rear shock mounting plates, 2 x rear spring u-bolts.
Check Stock