Categories

Best Degassing

0.9CF BVV Neocision Lab Certified Vacuum Oven V4D 4CFM 2 Stage Pump Kit

  • 3.2CF BVVâ„ Neocision Lab Certified Vacuum Oven and V9D 9CFM Two Stage Vacuum Pump Kit Disclaimer: This unit is intended for LEGAL purposes only, to be used in accordance with local laws and ordinances..
  • Use only in well-ventilated areas! INTRODUCTION Our vacuum ovens are purpose-built to perform degassing / purging of light hydrocarbon solvents. Using the technique of cold boiling, the oven applies a gentle heat under reduced pressure conditions to expedite solvent degassing while | 3.2CF BVV Neocision Lab Certified Vacuum Oven and V9D 9CFM Two Stage Pump Kit..
Check Stock

Yescom 5 Gallon Stainless Steel Vacuum Chamber Tempered Glass Lid kit Degassing Urethanes Silicones Epoxies

  • [Precise Vacuum Chamber]: 5 Gallon vacuum chamber kit includes 1pc vacuum chamber with lid & gasket, 1pc glycerin filled gauge, 1pc silicone pad, 1pc....
  • [Easy Operation]: Glycerin filled industrial gauge for clearly displaying the operating vacuum pressure, perfect for you to monitor the whole....
  • [Durable Construction]: Made of strong stainless steel, the chamber ensures sturdiness, corrosion & rust resistance and durability.
  • [Good Sealing]: Chemical resistant silicone gasket on the edge of chamber for providing perfect sealing on degassing.
  • [Practical Accessories]: Steel wire hose for strength and durability.
  • non-slip silicone mesh pad for placing in the chamber while degassing.
Check Stock

Mold Star 15 SLOW - 1A:1B Mix By Volume Platinum Silicone Rubber - Pint Unit

  • Tear Resistant - Mold Star silicones cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage *Packaging may vary*.
  • Heat Resistant - Cured Mold Star rubber is heat resistant up to 450°F (232°C) and is suitable for casting low-temperature melt metal alloys.
  • Curing - Allow Mold Star 15 SLOW silicone rubber to cure for 4 hours at room temperature (73°F/23°C) before demolding..
  • Vacuum Degassing - Although not necessary, vacuum degassing helps eliminate any entrapped air in pourable silicone rubber.
  • Mold Performance - The physical life of the mold depends on how you use it (materials cast, frequency, etc.). Casting abrasive materials such as concrete can quickly erode mold detail, while casting non-abrasive materials (wax) will not affect mold detail. Before storing, the mold should be cleaned with a soap solution and wiped fully dry. Two part (or more) molds should be assembled. Molds should be stored on a level surface in a cool, dry environment.
Check Stock

Orion Motor Tech Vacuum Chamber with 3.5cfm Pump, 1.5 Gallon Vacuum Chamber Kit and 38 Micron Vacuum Pump Epoxy Resin Kit, 5.7L Vacuum Chamber with Pump for Casting Degassing, Oil Incl.

  • COMPLETE VAC CHAMBER SET: This professional degassing kit from Orion Motor Tech includes a 3.5 cfm pump, a 1.5 gallon chamber, a wire hose, and all the accessories needed to quickly, easily, and safely handle removing air and other gases from resin, epoxy, oil, and other solvents (Cannot Be Used on Wood).
  • 3.5CFM VACUUM PUMP: This set's single-stage rotary vane pump is powered by a 0.25 hp all copper motor to keep your degassing humming along.
  • with its dual ports and included adapter, it also works with HVAC gauges and hoses to draw down car and low-tonnage AC systems to as low as 37.5 microns (5 Pa).
  • 1.5 GALLON CHAMBER: The vacuum chamber is constructed from brushed 201 stainless steel for superior durability and resistance to pressure, corrosion, and heat up to 248°F.
  • the transparent acrylic lid and provided gauge allow easy monitoring at every stage of the degassing process.
  • and a non-skid pad prevents noise and rattling during use.
  • HELPFUL ACCESSORIES: This vacuum pump and chamber set comes with the system's necessary lubricating and absorptive oil included, as well as a funnel and one-size-fits-most gloves for quick and clean replacement.
  • an adapter allows use of the pump with 1/4", 3/8", or 1/2" HVAC hoses as needed.
Check Stock

Toolly 3 Gallon Vacuum Chamber, Vacuum Degassing Chamber Stainless Steel Vacuum Chamber Kit for Stabilizing Degassing Urethanes, Silicones, Epoxies and Essential Oils

  • 【High Quality】 The stainless steel vacuum chamber has high strength and is very durable. It can withstand temperatures up to 160ºF and can maintain a vacuum status for 24 hours. Supports vacuum as low as 29.9" Hg..
  • 【Easy Installation】 The vacuum degassing barrel has a 5-foot-long hose and an oil filling gauge, which can be easily removed by closing the shut-off valve..
  • 【High-Quality Accessories】 The durable brass accessories on the box match all vacuum pump ports. Accurate pressure gauge for easy monitoring. It comes with 2 convenient foldable handles, easy to operate..
  • 【Transparent cover】 3/4" acrylic crystal cover allows you to observe the internal state..
  • 【Wide application】 3 gallon vacuum chamber is very suitable for degassing silicone, epoxy resin, filled molds, etc..
Check Stock

Epoxy Resin for River Table - UV Resistant Crystal Clear Epoxy Resin Kit - 2:1 Ratio for Deep Pour, Deep Casting Resin, Live Edge River Table (3 Gallon)

  • CRYSTAL CLEAR GLASS EFFECT: Epoxy for River Table is specially designed for any deep casting project. This deep pour epoxy resin for epoxy river table will be the perfect resin for your river table project. Its specialized formula is designed to prevent any other unwanted features such as pour degassing and yellowing..
  • LUSTRIOUS DEEP CASTING RESIN: This epoxy deep casting will make the best looking river table, bar counter, coffee table, or any other epoxy artwork or epoxy project within 72h under the right condition. Ensuring a warm room temperature 23 °C – 25 °C for best cure & degassing. This Epoxy river table formula will self-level & self degasses, ensuring an epoxy deep pour resin final project with no imperfection for your epoxy artwork, epoxy river table, or any epoxy woodworking..
  • SPECIALIZED UV PROTECTION FORMULA: Our river table epoxy resin is designed for our ebonist clients. Ensuring a thick pour river epoxy table made from only one pour with high resistance to any chemical, heat, water & the sun making it the most versatile epoxy river table formula. Suitable for any epoxy resin casting project in the comfort of your home. Compatible with any color pigment or liquid dye..
  • DO IT YOURSELF SAFE FOR YOUR HOME: Non-toxic when used as direct....
Check Stock

Vacuum Oven Constant Temperature Blast Drying Oven 1.5 Cu Ft,1000W Lab Vacuum Drying Oven Industrial Digital Forced Air Convection Thermostatic Machine,Rt+10-250°C(up to 300°C),Stainless Steel

  • 0.9CF BVVâ„ Neocision Lab Certified Vacuum Oven and V4D Series Vacuum Pump Kit DISCLAIMER This unit is intended for LEGAL purposes only, to be used in accordance with local laws and ordinances..
  • Use only in well-ventilated areas! Backed by our 3 Year Parts and Labor Warranty. INTRODUCTION Our vacuum ovens are purpose-built to perform degassing / purging of light hydrocarbon solvents..
  • INTRODUCTION Our vacuum ovens are purpose-built to perform degassing / purging of light hydrocarbon solvents..
Check Stock

Across International AT09.110.UL Ai Accutemp UL CSA Certified 0.9 cu. ft. Vacuum Oven with 5 Sided Heating 110V Purging Oven with LCD Control, Gas Back-Fill Capability, Stainless Steel

  • 0.9CF BVV Neocision Certified Lab Vacuum Oven - 5 Wall Heating, LED's, 8 Shelves Standard - 3 Year Warranty Disclaimer This unit is intended for LEGAL purposes only, to be used in accordance with local laws and ordinances..
  • Use only in well-ventilated areas! Backed by our 3 Year Parts and Labor Warranty. Introduction Our vacuum ovens are purpose-built to perform degassing / purging of light hydrocarbon solvents..
  • Introduction Our vacuum ovens are purpose-built to perform degassing / purging of light hydrocarbon solvents..
Check Stock

Coffee Bags 0.5 Lb - Kraft Paper Bags Kraft Coffee Bags with Valve,Stand up Coffee Pouches for Coffee Bean Storage-8oz 50 Pieces 0.5lb / 8oz

  • SEALABLE COFFEE STORAGE BAGS- These food-grade Kraft Flat bottom Side gusset stand up pouches are primary designed for packaging coffee and tea. and....
  • DEGASSING VALVE TO KEEP GASES AND MOISTURE AT BAY - One-way degassing valves release the pressure of trapped air and gas while preventing outside air....
  • MADE OF THE SAFEST MATERIALS - This sealable bags coffee pouch are made of Natural kraft paper + Aluminum foil fused protective inner lining + LLDPE,....
  • HEAT SEALING SUPPORTED - As an measure of protection, they are lined with a heat-sealable poly material that ensures an air-tight seal. Just press....
  • 100% SATISFACTION COMMITMENT - At any point if your Kraft paper bags is damaged we will replace it for FREE. We will do WHATEVER it takes with....
Check Stock

Kozyvacu Dual-Stage Rotary Vane Vacuum Pump for HVAC/Auto AC Refrigerant Recharging, EPoxy Resin or Wine Degassing, Laboratory, Medical or Milking (TA500)

  • ✅KEY SPECIFICATION: Dual Stage vacuum, Flow Rate: 5.0 CFM, Ultimate Vacuum:40 Microns, 1/2HP AC Air Tool Rotary Vane ,Inlet Port: 1/4 Flare and 1/2 ACME male ,Voltage /Frequency: 120V/60Hz,Oil Capacity:380 ml.
  • ✅NOISE REDUCTION-- This Vacuum Pump equips with a noise reducer and makes the vacuum pump run quieter..
  • ✅GUARANTEED QUALITY:The all-copper wired motor is stronger than other similar aluminum wired motor and has a longer service life..
  • ✅EASY MONITORING-- This vacuum pump comes equipped with an oil viewing window so that you can easily monitor oil levels and quality, prevention of oil deficiency. 1 bottle of vacuum pump oil is included..
  • ✅WIDELY USED: vacuum pump is widely used for both commercial and household applications.such as refrigeration maintenance, printing machinery, e-poxy resin degassing, wine degassing, thermoforming, vacuum packaging, medical equipment..
Check Stock

Epoxy Resin for River Table - 0.75 Gallon Kit - UV Resistant Crystal Clear Epoxy Resin Kit - 2:1 Ratio for Deep Pour, Deep Casting Resin, Live Edge River Table (0.5 Gallon + 0.25 Gallon)

  • CRYSTAL CLEAR GLASS EFFECT: Epoxy for River Table is specially designed for any deep casting project. This deep pour epoxy resin for epoxy river table will be the perfect resin for your river table project. Its specialized formula is designed to prevent any other unwanted features such as pour degassing and yellowing..
  • LUSTRIOUS DEEP CASTING RESIN: This epoxy deep casting will make the best looking river table, bar counter, coffee table, or any other epoxy artwork or epoxy project within 72h under the right condition. Ensuring a warm room temperature 23 °C – 25 °C for best cure & degassing. This Epoxy river table formula will self-level & self degasses, ensuring an epoxy deep pour resin final project with no imperfection for your epoxy artwork, epoxy river table, or any epoxy woodworking..
  • SPECIALIZED UV PROTECTION FORMULA: Our river table epoxy resin is designed for our ebonist clients. Ensuring a thick pour river epoxy table made from only one pour with high resistance to any chemical, heat, water & the sun making it the most versatile epoxy river table formula. Suitable for any epoxy resin casting project in the comfort of your home. Compatible wi....
Check Stock

Kozyvacu Dual-Stage Rotary Vane Vacuum Pump for HVAC/Auto AC Refrigerant Recharging, EPoxy Resin or Wine Degassing, Laboratory, Medical or Milking (500P)

  • ✅KEY SPECIFICATION-- Integrated with vacuum gauge and electromagnetic valve,Flow Rate: 5.0 CFM, Dual-Stage Ultimate Vacuum:40 Micron, 1/2HP AC Air Tool Rotary Vane ,Inlet Port: 1/4 Flare, Voltage /Frequency: 110V/60Hz,Oil Capacity:380 ml.
  • ✅NOISE REDUCTION-- This Vacuum Pump equips with a noise reducer and makes the vacuum pump run quieter..
  • ✅GUARANTEED QUALITY-- The all-copper wired motor is stronger than other similar aluminum wired motor and has a longer service life..
  • ✅EASY MONITORING-- This vacuum pump comes equipped with an oil viewing window so that you can easily monitor oil levels and quality, prevention of oil deficiency. 1 bottle of vacuum pump oil is included..
  • ✅WIDELY USED-- vacuum pump is widely used for both commercial and household applications.such as refrigeration maintenance, printing machinery, e-poxy resin degassing, wine degassing, thermoforming, vacuum packaging, medical equipment..
Check Stock

Bestauto Vacuum Chamber 3 Gallon Vacuum Degassing Chamber Glass Lid Stainless Steel Degassing Chamber 12L Silicones

  • ...nsparent Glass Window: This vacuum chamber comes with an oil viewing window, monitoring oil levels easily and avoiding oil deficiency. You can observe and adjust the whole workflow in time from the visual lid. Besides, The vacuum chamber has a silicone ring with high sealability. It is perfect for applications like degassing polyurethane, epoxy resin, extracting essential oils, etc..
  • Precise Vacuum Gauge: Equipped with a pressure vacuum gauge, you can accurately measure the pressure value in the port. And you can maintain the pressure of the meter to prevent cracking with the oil filling port. In addition, the two silencers can reduce the noise and make the pump run quieter..
  • Thoughtful Details: The non-stick silicone gasket allows you to wipe off mixtures easily. And the hose built with steel wire is provided to connect the vacuum pump. The control valve ensures a high vacuum..
  • Wide Application: This vacuum chamber is suitable for degassing urethane, silicones, epoxies, extracting essential oils from organic materials, etc..
Check Stock