Best Delay Relay

Tuimiyisou Relay Module Board Switch Motor Time Adjustable Delay Relay DC 5V 6V 9V 12V Intelligent Controller Industrial Control Components-Module

• This Relay Delay Switch is easy to use when you are familar with the operation.
• With the Relay Module Controller, your life will be more intelligent and convenient.
• Relay Board has high precision, stable and reliable performance for your daily use and satisfaction.
• There are many voltage and time range of the Relay Module for your choice, both "on" time and "off" time are adjustable.
• Time Adjustable Delay Relay can be widely used on timer operating equipment, machine repetitive test circuit, fish tank intermittent pump, etc.

12 Volt Timer Relay, DROK 0.1s to 999min 50mA 4-Mode On-Off Automotive Digital Delay Relay, Electric Delay Timer Switch, Cycle Time Delay Module with LED Display

• 4 MODE TIME DELAY RELAY: DROK 12V relay is provided with 4 different settings and supports various triggering signal source, like positive side of power supply triggering, Button, PNP sensor, PLC signal, which is available for most of applications..
• WIDE ADJUSTABLE TIMING RANGE: This off delay relay supports widest timing range, 0.1 seconds to 999 minutes adjustable, which can fulfilled your various need..
• STRONG ANTI-INTERFERENCE ABILITY: The output of digital timer relay adopts optocoupler isolation, which enhances the capacity of resisting disturbance power consumption..
• SUPER SIMPLE OPERATION: Our relay board is operated by buttons and the delay module is equipped with LED digital display which is convenient for you to check the set value..
• AUTOMATIC SAVING FUNCTION: After you finish the setting, you can cut off the power and then the parameters will be saved automatically, handy and convenient..

Two Position Low V Actuator w/End Switch

• Output: fan relay, alarm relay and 4-20ma current loop.
• Controls: buzzer, Digital display, latching relay, relay Delay, relay minimum runtime.
• Mounts on a standard 4” x 4” electrical box.
• 5 a spdt fan relay controls starters of exhaust fans.

AGASTAT SCERX22ABA Discrete Plug-in, True Off-DELAY, TIME DELAY Relay, 0.5-15 Second Range, 2-1437463-1, 120 VAC/DC, 50/60 HZ, KNOB Adjust, UL RECOGNIZED, DPDT, SCE Series, 5 AMP DPDT

• TIME DELAY RELAY SPDT 100H 240VAC CONTACT CONFIGURATIONSPDT NOM INPUT VOLTAGE240VAC DELAY TIME RANGE0.1S TO 100H TIMING ADJUSTMENTKNOB RELAY MOUNTINGP.

(1PCS) DS1010S-100 IC DELAY LINE 10TAP 16-SOIC 1010 DS1010

Macurco TX-12-HS White Hydrogen Sulfide H2S (Line Voltage) Fixed Gas Detector Controller Transducer with White Housing

• Output: fan relay, alarm relay and 4-20ma current loop.
• Controls: buzzer, Digital display, latching relay, relay Delay, relay minimum runtime.
• Mounts on a standard 4” x 4” electrical box.
• 5 a spdt fan relay controls starters of exhaust fans.

Timer Relay, Icstation Time Delay Switch AC 110V 120V Timer Switch Module Digital Time Cycle AC 85V-265V LED Display 0ms-999h

• ⏳Wide timing range: ICStation time relay delay is able to tolerate the widest timing adjusting range: 0-999S/ 0-999M/ 0-999H,it is available for various application.(Please Note: If the T1 time is second,the T2 time must be second. They can not achive T1 time is second and T2 time is minute/hour.).
• ⏳ Wide supply voltage range: Icstation timer relay supports AC85-265V. This device can support different work mode, If you are not clear the operation, please download the PDF user manual or Email us..
• ⏳Cycle Timer relay supports sleep working mode, which will turn off automatically after 10s(need to set ). It is also very easy to set parameter via 4 momentary keys..
• ⏳Parameter:Cycle Timer relay Support Voltage Input: AC85-265V, Maximum Power: .
• ⏳Application:The Digital timer delay can be used for timing, delay, cycle timing, intermittent timing occasions and so on, such as the descending machine DIY, timing switch, timing alarm control board. Kindly Tips: We have uploaded the user manual on the Amazon page at technical specification or under the IMAGE, please download it and read it before you use it..

0.5S-300H 11 Pins Knob Control Delay Timer Relay H3CR-A Waterproof Time Relay 100-240VAC 100-125VDC for Automated Control Circuit

• 【Wide Field of Applications】: Our 11 pins knob control delay timer relay is widely applied to automated control circuit such as remote control,....
• 【Super Wide Adjustable Time Range】: The adjustable time range is super wide, which can last from 0.5 seconds to 300 hours. Users can adjust the....
• 【Wonderful Shell】: This 100-240VAC 100-125VDC knob control time relay adopts high quality plastic case, and this wonderful shell is waterproof and....
• 【High Precision】: Our 0.5s-300h H3CR-A waterproof time relay has stable performance, and a long service life. This delay timer relay also has high....
• 【Specifications】: Model: H3CR-A Rated voltage: 100-240VAC 100-125VDC Voltage tolerance: ±10% Power consumption: about 1.9VA Time range: 0.5....

Macurco TX-6-AM Ammonia NH3 Low Voltage Fixed Gas Detector Controller Transducer

• Fan relay actuation: Selectable from 15 to 75 ppm Nh3.
• Output: fan relay, alarm relay and 4-20ma current loop.
• Controls: Digital display (0-100 ppm), buzzer, fan Delay, fan minimum runtime.
• Mounts on a standard 4” x 4” electrical box.
• 5 a spdt fan relay controls starters of exhaust fans.

Automotive Digital Timer Relay Board DC 12V 20A 1500W Relay Module with Dual Time Display, Timing Relay Switch ON-Off Control Support Cycle of time Time Delay for Car Vehicle (DC 12V)

• ❃❃ Digital cycle timer delay module with time ranging from 1 second to 999 hours, available for various application.▲▲ (Notice: no out put Voltage) If you need the E-Manual or meet any other questions, pls contact us and we will send it to you!!!.
• ❃❃ The time relay delay Dual display: Red readout for practical value(PV).
• ❃❃ Can be used in timing, delaying, cycle timing, intermittent timing, raft fishing machine, slow-down machine DIY, etc..
• ❃❃ This relay switch is four-terminal wiring and setting by buttons, easy and simple for everyone to use it..
• ❃❃ This 12V time delay relay can store the setting automatically. Please wait 6 seconds after finishing setting the data. The data set will be stored automatically after 6 seconds..

Hilitand AD22B04 12V Signal Decoder 4 Channel DTMF Tone Relay Phone Remote Control PLC

• 【12V】Working voltage is DC 12V, you can easily find suitable power for this relay..
• 【reverse polarity protection.】This signal decoder relay ahs reverse polarity protection which can extend the service life..
• 【8 modes】8 modes of operation: Non-locking (Momentary ), self-locking (Toggle), inter-locking(Latch), 5/20/60/120/250-second delay..
• 【default control】The default control command is 1/2/3/4. Example: Dial 1 to control relay 1, dial 2 to control relay 2, dial 3 to control relay 3, dial 4 to control relay 4.
• control commands can be changed any 1-4 bits. (For more details, refer to "AD22B04_4 channel DTMF controller commands setting manual ")..
• 【operating current】Standby 11-13 MA, 1 relay "open" 44MA, 2 relays "Open" 77MA, 3 relays "Open" 110MA, 4 relays"open" 140MA..

ATO Phase Voltage Monitoring Sequence Relay 1 Phase Voltage Protection Relay Under Over Voltage with 1 CO + 1 NC Contacts AC/DC 24-48V

• 【Measuring Circuit】Phase sequence protection relay is compatible with AC and DC supply, the rated voltage is AC/DC 24-48V.
• 【High-quality Product】LCD display indicating voltage, operation and fault status, adjustable reset mode: automatic/manual/automatic with power-on delay reset, fault recording for the lately 3 faults.
• 【Mutiple Functions】Adjustable overvoltage and undervoltage threshold, independent adjustable delay time for over-voltage, under-voltage.
• 【Output Contacts】Monitoring relay with 1 CO + 1 NC contacts, and the capacity is 6A, 250V AC (resistive load).
• 【Wide Applications】Voltage monitoring sequence relay can be applied in equipment or devices from undervoltage and overvoltage in the applications like air compressors, electric motors, pumps, fans, air-conditioning system, blowers, elevators, cranes, refrigeration equipment, laser equipment, industrial control system, etc..

AC100V~250V Infinite Cycle Delay Timer Timing Switch Relay Turn On Off Module 0.5s ~ 1000min Adjustable Time Delay Switch

• 【Simple Operation】Timer module enters into an infinite cycle mode when power on, and stops working automatically after the setting time, easy to....
• 【Adjustable】Relay timer has 0.5s~1000min wide adjustable time range, you can adjust the delay time both at "RUN" time and "STOP" time.
• 【Practical】The repeat cycle timer module can be used to control the reciprocating stroke, or repetitive power on and off for equipment and....
• 【Application】The delay timer module is suitable for timer operating equipment, machine repetitive test circuit and fish tank intermittent pump.
• 【Product Parameter】AC100V~250V voltage, delay timing timer relay switch can be used for 100V/110V/ 120V/ 127V/220V/230V/240V power.