Categories

Best Delta 4988

3D Printer Controller Kit RepRap RAMPS 1.4 + 2560 Board + 5pcs A4988 Stepper Motor Driver with Heatsink + LCD 12864 Graphic Smart Display 3D Printer Controller Kit

  • 2560 control board: The board is a microcontroller board based on the 16AU .It has 54 digital input/output pins (of which 14 can be used as PWM....
  • RAMPS 1.4: RAMPS interfaces an for Arduino with the powerful for Arduino platform and has plenty room for expansion. The modular design includes plug....
  • LCD 12864 with Controller: This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display. You....
  • A4988 driver module: A4988 Stepper Motor Driver Board is a breakout board for Allegro?ˉs A4988 DMOS Microstepping Driver with Translator and....
  • Warning: Connecting or disconnecting a stepper motor while the driver is powered can destroy the driver. (More generally, rewiring anything while it....
Check Stock

LM YN 3D Printer Stepper Motor Driver Control Extension Shield Board for A4988 DRV8825

  • You can use the A4988/DRV8825, insert the attention direction, otherwise it will burn the drive..
  • Jumper hit ON DP indicating the position of 16 segments (4988) or 32 segments (8825)..
  • Jm is connected with the motor. Jv connection 5V and 12V-24V power supply..
Check Stock

Ximimark A4988 DRV8825 3D Printer Stepper Motor Driver Control Extension Shield Board 3Pcs

  • The A4988/DRV8825 can be used, pay attention to the direction when inserting, otherwise the drive may be burnt..
  • The position where the jumper hits the ON DP indicates 16 subdivisions (4988) or 32 subdivisions (8825)..
  • Jv connects 5V and 12V-24V power supplies..
  • Jc's ESDG corresponds to the EnableStepDirGnd drive signal output on the connection..
Check Stock

Eiechip® CNC 3D Printer Kit for Arduino Mega 2560 R3 + RAMPS 1.4 Controller + LCD 2004 + 6X Limit Switch Endstop + 5 A4988 Stepper Driver 3D Printer Interface & Driver Modules

  • 3D Printer Accessories Set meets most needs. Including CNC Shield V3.0, UNO R3 Board, A4988 StepStick Stepper Motor Module..
  • The 3D printer stepper motor shield V3 can be used as driver expansion board for engraving machines and 3D printers..
  • It has in total 4 channel slots for A4988 stepper motor driver modules for driving 4 channel of stepper motors..
  • Each channel of stepper motor only needs 2 IO ports, which means 8 IO ports is sufficient to manage 3 stepper motors..
  • This shield can make quick work for managing stepper motors in your project..
Check Stock

Aitrip 5pcs TMC2209 V3.0 Stepper Motor Driver for 3D Printer SKR V1.3 SKR with heatsink 256 Microsteps Current 2.8A Peak for Reprap Ramps1.4 MKS Gen Mainboard Parts (5pcs)

  • TMC2209 V3.0 Stepper Motor Driver is an ultra-quiet two-phase stepper motor drive chip.
  • It can compatible with StepStick and Pololu A4988.
  •  It can replace the original TMC2208, A4988, DRV8825, LV8729 and so on.
  • 5 pcs Drive capability up to 1.7A (RMS) continuous coil current - 2.8A Peak.
  • Step/Dir interface with microstep interpolation (up to 256 microsteps).
Check Stock

KeeYees Professional 3D Printer CNC Kit with E-Tutorial - CNC Shield Expansion Board V3.0 R3 Board A4988 Stepper Motor Driver DC Power Cable Mechanical Switch Endstop with Jumper caps

  • ★ Stable performance ★ A4988 Driver Chip is low power consumption and will not be too hot during use. The performance is more stable than DRV8825....
  • ★ DC Power cable ★ The DC power cord can quickly connect to the DC power adapter and power the CNC shield board. Save time and more securer cable....
  • ★ CNC Shield ★ This is the latest version of the expansion board, which can be used for engraving machines and 3D printers. It can drive 4 A4988....
  • ★ With 20 Pcs Jumpers ★ When setting up CNC projects, jumper caps are necessary accessories. There are 20 of them in the kit, enough for most....
  • ★ Reliable technical support ★ Please visit github (github: Keeyees/KY-102) to get relevant information or can contact us on Amazon, we will send....
Check Stock

MELIFE 3D Printer Controller Kit RepRap, RAMPS 1.4 + Mega 2560 Board + 5pcs A4988 Stepper Motor Driver with Heatsink + LCD 12864 Graphic Smart Display 3D Printer Controller Kit for RepRap.

  • The Mega Pololu Shield, or RAMPS for short,designed to fit the entire electronics needed for a RepRap in one.RAMPS interfaces an Mega with the powerful MEGA platform and has plenty room for expansion..
  • The Mega2560 is an ATmega2560 as core microcontroller,development board itself has 54 groups digital I / O With the bootloader, download the program directly via USB without having to go through other external writer..
  • Large screen 12864LCD integration for SD card in the back, after slicing the file into the for SD card, you can select the corresponding files on the LCD.The board has encoder, can be achieved parameter adjustment, and the file selection print!The ramps can be Plug-and-Play, but it need to modify the firmware to support..
  • A4988 Stepper Motor Driver can adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated..
  • Packing List:RAMPS 1.4*1+Mega 2560 R3 with cable *1+A4988 Stepper Motor Driver*5+Heat sink*5+LCD control screen+cable*1.
Check Stock

Aoicrie MKS Gen L V1.0 3D Printer Integrated Mainboard Controller PCB Board Compatible Ramps1.4/Mega2560 R3 with A4988 Motor Driver for 3D

  • ...e as configuration way as Ramps1.4, it can replace Ramps1.4 directly..
  • Use high quality MOSFET tube,better cooling and more stable.Use special power chip,support 12-24V input,reduce the heated bed current to 1/4 that slove the Mosfet heat problem efficiently and power shortage..
  • Support a variety of stepper drivers: A4988,DRV8825,TMC2208 and TMC2100, and available to work with LCD2004,LCD12864,MKS TFT24/28/32/35 & Available to connect external large stepp drivers, A4988 driver board widely used in 3D printers and small CNC machines..
  • Support functions: Non-trace resumption after power off, run out filament ,and auto shut down, XTZ axis with different color terminal controls the motors and end stop,which is convenient to wire.Use high-quality 4 layer PCB&Use special power chip.Retail Servos,AUX-1 and AUX-2 interface of Ramps1.4 provide three 5V output and three 12V output interfaces..
  • Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step.Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor's rated voltage toachieve higher step rates.Use the configuration file to set the driving current mode, avoid manual adjustment of the....
Check Stock

Rowenta Delta zr902701 Head for Vacuum Cleaner with bag

  • 18K GOLD PLATED – Sorority Shop's stainless steel gold-plated Tri Delta necklace is one of a kind. It gets its shine from 18 karat gold, which has been vacuum plated to create it's brillance and strength. As a result, it will catch anyone's eye from all angles!.
  • UNIQUE DESIGN – The gold-dipped Delta Delta Delta gifts are designed to make a statement. The sorority nickname is used to offer a unique look. In addition, it is a perfect size: the pendant letter height is 7mm, and the chain length is 16in with 2in of extra for adjustment..
  • WEAR WITH PRIDE – We created this sorority jewelry so you could reflect your love for Tri Delta. Wear it to sorority events, parties, workplace, university, and whatnot. The Greek necklace will style with all possible outfits and speaks volumes about your affiliation..
  • PERFECT GIFT – The Tri Delta sorority pendant is one of the ideal sorority gifts for women. A fantastic present for bid day, recruitment, big-little, sorority events, and much more! Exhibit your association to your sorority and celebrate sisterhood with this fantastic souvenir..
  • DURABLE & LIGHTWEIGHT – You'll be wearing this Delta Delta Delta jewelry symbol necklace for years to come. The premium-grade gold plating ensures it's both solid and durable....
Check Stock

DELTA FAUCET R10000-PXWS, 4.88 x 5.06 x 4.88 inches

  • COMPLETE FLEXIBILITY: Delta's MultiChoice Universal Valve gives you flexibility to upgrade your shower trim without altering plumbing. It is compatible with most Delta single-function, dual-function, or dual-function thermostatic trim kits.
  • CONNECTION TYPES: Hot and cold inlets machined for PEX crimp connections and 1/2-inch universal outlets with male threads. Screwdriver stops are conveniently included.
  • VALVE BODY ONLY: Valve body only, required cartridge is included with your Delta shower trim of choice.
  • BACK-TO-BACK CAPABILITIES: Back-to-back installation capability for multi-unit buildings.
  • LIFETIME LIMITED WARRANTY: You can install with confidence, knowing Delta's MultiChoice Universal Valve is backed by Delta Faucet's Lifetime Limited Warranty.
Check Stock

DELTA FAUCET RP24096, Chrome

  • This is an O. E. M. Authorized part or this is an authorized aftermarket product.
  • For replacement in two handle faucets.Sold individually.For technical assistance, contact 1. 800. 345. DELTA.
  • For technical assistance, contact 1.800.345.DELTA.
Check Stock

Danco 10004 Trim Kit, for Use with Delta Tub and Shower Faucets, Plastic, Brushed Nickel

  • DELTA TUB/SHOWER TRIM KIT REPLACEMENT replaces 1300/1400 Delta Monitor series, MultiChoice 13/14 series and Delta 600 series with and without a push button diverter.
  • COMPATIBILE WITH CARTRIGE STYLE SHOWER FAUCETS: Fits Delta Monitor 1300/1400 series cartridge OEM# RP 198804 (Danco Model # 10347) and MultiChoice 13/14 series cartridge OEM# RP46074 (Danco Model # 10664).
  • COMPATIBILE WITH BALL STYLE SHOWER FAUCETS: Fits Delta Monitor 600 series Delta 70 ball OEM# RP770 (Danco Model # 88119) and Delta 212 ball OEM# RP212 (Danco Model # 88120) and will fit Delta Shower Valve with and without push button diverter.
  • IMPORTANT INSTALLATION TIP: To properly install this product, you need a minimum of a 3-1/2 inch opening in the wall for the offset portion of the trim plate to sit back in to ensure it sets flush to the wall.The tabs on the faceplate insert will align with the slots on the faceplate.
  • BILT 3D INTERACTIVE INSTRUCTIONS download is a revolutionary way to assemble & install products with voice & text guided directions and step-by-step self-paced instructions to help you finish your install quickly & efficiently, with the confidence you’ve done it right!.
  • SHOWER TRIM KIT INCLUDES: (1) metal lever handle (1) clear acrylic handle, faceplate trim, screws, a....
Check Stock

RP46074 Shower Cartridge for Delta Shower and Tub 13/14 Series,Delta Monitor Shower Parts,Single-handle Delta MulitChioce Universal Valve Cartridge Assembly

  • 【Applicability】The RP46074 shower parts was built for use with Delta Multi Choice Universal Tub/Shower valve body (Delta rough-in R10000, R1100,....
  • 【Feature】Fits all Delta single-handle Monitor 13/14 Series tub/showers, Only single-function pressure balance temperature control is provided to....
  • 【safety】This RP46074 Monitor shower cartridge with pressure balance design keeps water temperature within a safe ±3.6° F (±2° C), Helps....
  • 【Material】This delta shower cartridge is made of plastic structure, durable, and can easily replace the entire delta shower parts. Save more....
  • 【Warranty Service】If you are not satisfied with our delta cartridge, we promised you will get your money back or a new replacement delta....
Check Stock