Audio Technica AT2035 Microphone with Knox Gear Pop Filter, Boom Arm and XLR Cable Bundle (4 Items)

  • [Strong Compatibility] :For at2020 and At2035 mic boom arm adapter wide compatibility 3/8'' to 5/8'' Screw adapter are line with industry standards.This stand not only compatible with at2020 and At2035 mic, but also suitable for mount most standard-sized microphones..
  • [Easy to use]:This at2020 and At2035 mic Microphone boom arm is simple to set up and demount, you can easily move and carry the microphone stand.Compatible with at2020 and At2035 mic,Suitable for voice-over, Video recording, broadcasting, TV stations for you additional convenience..
  • [Heavy Duty Steel Structure]: Super-strong spring with extra positioning screw, compact microphone arm stand designed for at2020 and At2035 Microphone carry,sturdy enough to keep mic well placed. Max load: Approx.2pound/1kg..
  • [Rugged desk mount]: In comparison to the old versions, this at2020 and At2035 zinc alloy desk mount is built with anti-scratch pad and wider mouth up to 2 inch/5cm to fit most desktop to fix the base..
  • [Various accessories]: The set not includes at2020 and At2035 Microphone.The set includes 1 x at2020 mic boom arm, 1 x Desk clamp, 1 x 3/8" to 5/8"Adapter, 3 x Cable tie..
Check Stock

Rockville RCM03 Studio Recording Condenser Microphone+Shock Mount+Pro Boom Arm

  • Package Includes: (1) Rockville RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount, (1) Rockville ROGAN STAND Pro Boom Arm Mic Stand with Fixed Mount+Desk Stand+Cable.
  • Features of RCM03: Rockville RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount, Aluminum high quality construction, Polar Pattern: Internally Polarized Condenser Cardioid Design, Large diaphragm for smooth, natural sound and low noise, Power Requirements: 48V DC Phantom Power, Uni-directional, Sensitivity: -27dB±2dB(0dB=1V/Pa at1kHZ), Output impedance: 200O±30%(at 1kHz),.
  • Standard operating voltage: 3V, Operating voltage range: 1.5V-10V, Current consumption: less than 500uA, Voltage deduction characteristic: within 3dB at 2V, S/N ratio: More than 24dB, Frequency Response: 30Hz - 20 KHz, Fixed Crossover Filter cutoff frequency: 40Hz---16 KHz, Load impedance: Greater or = to 1000 Ohms, Equivalent Noise level: Less than 18dB A (IEC581-5), Max. Input SPL: 126dB(THD=1.0% at 1kHZ), Electrical current: Greater than 4.8Ma.
  • Features of ROGAN STAND: Rockville ROGAN STAND Pro Boom Arm Mic Stand, Includes XLR cable built into the stand that is hidden inside the stand for a clean look, Deluxe pro version is one solid piece with no visible springs and an advance....
Check Stock

SoloCast Boom Arm Mic Stand, Adjustable Suspension Boom Scissor Arm Stand for HyperX SoloCast Gaming Microphone by SUNMON

  • 【Perfect Boom Arm】- Suspension boom arm stand suitablely fit your HyperX SoloCast microphone, you can easily adjust the mic to the suitable angle or height to show your perfect voice..
  • 【Stability】- Mic boom arm is dual suspension springs on each boom arm, protects the SoloCast microphone from shaking, sinking and making noise..
  • 【Mic stand】-The Mic Arm desk mount can be extended up to 26.8"/68cm. Max support weight is 3 Pound (1.4 KG)..
  • 【Table Clamp Base】-Suspension boom arm comes with one desk clamp, can easily clip to any desktop up to 1.89"/4.8cm thick. The sponge on the base could protect your desk without any scratches when you swivel side screw..
  • 【Package】- Included:1x HyperX SoloCast Microphone Stand, 1x Table mounting clamp, 1x Screw adapter (3/8" to 5/8" match most microphones and shock mount). Note: NOT INCLUDED STREAMING MICROPHONE..
Check Stock

Rockville PC Gaming Streaming Twitch Bundle RCM03 Microphone+Headphones+Boom Arm

  • Package Includes: (1) RockvilIe RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount. (1) RockvilIe DMS40 40" Microphone Boom Arm Studio Podcast USB Mic Stand+Desk Clamp. (1) RockvilIe PRO-M50 Studio Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad. RCM03 Condenser Microphone (made of aluminum!). 100% Copper 10 foot 3.5mm jack to XLR cable to connect mic to your computer or other device. 100% Copper 10 foot XLR to XLR cable to connect to any mixer with phantom power.
  • Metal shock mount. Metal Anti-wind foam cap. Owners Manual. Warranty card. Features: RockvilIe RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount. Aluminum high quality construction. Polar Pattern: Internally Polarized Condenser Cardioid Design. Large diaphragm for smooth, natural sound and low noise. Power Requirements: 48V DC phantom power or computer sound card (can connect to the phantom power channel of your mixer or can connect to your laptop or computer).
  • Uni-directional. Sensitivity: -27dB2dB(0dB=1V/Pa at1kHZ). Output impedance: 2000%(at 1kHz). Standard operating voltage: 3V. Operating voltage range: 1.5V-10V. Current consumption: less than 500uA. Voltage deduction characteristic: within 3dB at 2V. S/N ratio: More than 24dB. Frequency Resp....
Check Stock

For Blue Yeti Boom Arm, Mic Desk Stand Compatible with Blue Yeti Nano Microphone, Blue Yeti x Mic Arm Stand Perfect for Podcasts, Gaming, Recording.

  • [Strong Compatibility] :For blue yeti x and blue Yeti Nano mic boom arm adapter wide compatibility 3/8'' to 5/8'' and 3/8'' to 1/4'' Screw adapter are line with industry standards.This stand not only compatible with blue yeti x and blue Yeti Nano mic, but also suitable for mount most standard-sized microphones..
  • [Easy to use]:This blue yeti x and blue Yeti Nano mic Microphone boom arm is simple to set up and demount, you can easily move and carry the microphone stand.Compatible with blue yeti x and blue Yeti Nano mic,Suitable for voice-over, video recording, broadcasting, TV stations for you additional convenience..
  • [Heavy Duty Steel Structure]: Super-strong spring with extra positioning screw, compact microphone arm stand designed for blue yeti x and blue Yeti Nano Microphone carry,sturdy enough to keep mic well placed. Max load: Approx.2pound/1kg..
  • [Rugged desk mount]: In comparison to the old versions, this blue yeti x and blue Yeti Nano zinc alloy desk mount is built with anti-scratch pad and wider mouth up to 2 inch/5cm to fit most desktop to fix the base..
  • [Various accessories]: The set not includes blue yeti x and blue Yeti Nano Microphone.The set includes 1 x blue yeti mic boom arm, 1 x Desk clamp, 1 x 3/8" to 5/8"Adapter, 3 x Cable tie..
Check Stock

SUNMON Microphone Wall Mount and Metal Table Mounting Clamp, Universal Microphone Boom Arm Stand Compatible with HyperX QuadCast, Blue Yeti, Blue Snowball, Shure SM58 Microphone

  • Widely Compatible: The adjustable arm comes with a standard 3/8" to 5/8" adapter for different shock mounts and microphones. (Note: The microphone and shock mount are not included.).
  • Double Microphone Mount: The boom arm stand contains two different mic mount, wall mount and table mounting clamp. Satisfy the use of multiple scenarios..
  • Mic arm stand: The stand arm can be extended up to 26.8"/68cm. Max support weight is 3 Pound (1.4 KG)..
  • Upgraded Clamp: The table mounting clamp cab easily clip to 2.36''/60mm thick deskwith 0.47in/12mm hole for mic arm. The microphone wall mount set can Install on the wall, solve the limitation that your desk cannot be installed. (Drill Bit Hole diameter: 15/64" /5.95 mm).
  • Package Included: 1x Mic Scissor Arm Stand, 1x Table mounting clamp, 1x Microphone wall mount set, 1x Screw adapter (3/8" to 5/8" match most microphones and shock mount), 1x Mic clip. Note: NOT INCLUDED MICROPHONE AND SHOCK MOUNT..
Check Stock

Luling Arts Microphone Arm, Upgraded Mic Arm Micropone Stand with Pop Filter Boom Suspension Stand for HyperX QuadCast, Blue Yeti, Snowball, Yeti x ,Gaming , Podcasts

  • 【Upgraded Mic Arm Leg】The microphone arm Improved from hollow to solid leg,no longer break or shake. more stable and stronger.Will not break the legs, the market will break the legs after 6 months of use..
  • 【Mic Stand with Pop Filter】Adjustable microphone stand with U-shaped three layer pop filter, reduce the plosive, wind interference,Compatible for HyperX Quadcast,RODE NT1,AT202 USB+ and more diameter of 46mm-53mm microphones..
  • 【Stability Range of Motion】The boom arm with Super-strong spring, compact boom mic arm stand designed for heavy duty carry. Max load: Approx.53oz/1.5kg. Easily Rotating or height Movement to show your perfect voice..
  • 【Upgraded Desk Mount Base】:The Suspension mic boom arm Designed for heavy duty carry and compared with old versions,all zinc alloy construction desk mount is built with anti-scratch pad and wider mouth up to 2" to fit most desktop..
  • 【Complete Microphone Stand bundle 】The boom mic stand bundle comes a 3/8” to 5/8” screw adapter,a microphone arm stand, a table clamp, a mic pop filter, a manual,5pcs cable ties ..
Check Stock

SUNMON Quadcast Mic Stand with Boom Arm Clamps For HyperX Quadcast Microphone

  • 【Perfect Boom Arm】- Suspension boom arm stand fit your HyperX QuadCast suitable, you can easily adjust the mic to the suitable angle or height to show your perfect voice..
  • 【Assembly clip】 - suitable for mic arm desk mount and wall-mounted installation, Adapt to different use environments. It can be used as desktop microphone holder clamp, architect lamp clamp, magnifier lamp clamp, camera holder clamp..
  • 【Wide range of application】 - the bracket socket is suitable for most support pipes of 11-13mm. It is installed on a horizontal table with a maximum clamping thickness of 2.75"/7cm. It is installed on a vertical side plate and the maximum clamping thickness is 1.57"/ 4cm..
  • 【Compatibility】 - Perfectly match most boom arm stand. Double-size thread is specially designed to fit US and EU microphone stand. Note: Not Included Mic Stand and HyperX Quadcast Microphone..
  • 【Refused to break】 - heavy metal desk clamp, professional desktop stress structure effectively remove the stress generated when pushing and pulling the mic desk arm, reducing the possibility of desk clamps breaking..
Check Stock

QuadCast Boom Arm Mic Stand, Adjustable Suspension Boom Scissor Arm Stand for HyperX QuadCast, QuadCast S – RGB USB Condenser Microphone by SUNMON

  • 【Perfect Boom Arm】- Suspension boom arm stand fit your HyperX QuadCast suitable, you can easily adjust the mic to the suitable angle or height to show your perfect voice.Before installing your hyperx microphone to the microphone arm, you can loosen the knob and adjust it to the angle you want to tighten after installing your gaming mic..
  • 【Stability】- Mic boom arm is dual suspension springs on each boom arm, the knobs are reinforced to keep the mic arm where you want it to be,protects the HyperX QuadCast S microphone from shaking, sinking and making noise..
  • 【Mic stand】- Before you receive this mic stand for hyperx quadcast, we pre-install the silver adapter for hyperx quadcast boom arm. Mic arm adapter can be converted from 3/8"to 5/8"for adapting HyperX QuadCast..
  • 【Table Clamp Base】-Suspension boom arm comes with one desk clamp, can easily clip to any desktop up to 1.89"/4.8cm thick. The sponge on the mic stand desk base could protect your desk without any scratches when you swivel side screw..
  • 【Package】- Included: 1x HyperX QuadCast Mic Scissor Arm Stand, 1x Table mounting clamp, 1x Screw adapter (3/8" to 5/8" match most microphones and shock mount,Pre-installation completed). Note: NOT INCLUDED STREAMING MIC..
Check Stock

eWonLife Mic Boom Arm, Microphone Stand Desk Mount with 5/8 Thread, Heavy Duty Boom Mic Stand for Shure SM7B, Mv7, Blue Yeti, Hyperx Quadcast, With Filter, 5/8\ to 3/8\

  • ... makes it stable. It can supports the desks as thick as 2.4 inches. The desk mic stand even can be suitable for the desk with 1.18”/3cm small edges..
  • Microphone Stand with Internal Spring, Better Using Experience: High-quality and well-designed internal springs do not make any squeaking sound when the mic arm desk mount are moving. The internal spring make it has a cleaner more professional look. The filter with 2 screen can blocks and dissipates air blasts, reducing its velocity to get good sound..
  • Wide Compatibility: The microphone desk arm stand is compatible with Blue Yeti, Blue Snowball, Shure Mv7, Sm7b, Hyperx Quadcast, Fifine and other mics. Come with 5/8” to 3/8” Adapter, it fit for european microphones. Come with 5/8” to 1/4” adapter, It fit for stand of camera, mobile phone ipad and so on..
Check Stock

Rockville ROGAN STAND Pro Boom Arm Mic Stand with Fixed Mount+Desk Stand+Cable

  • Includes: Boom arm stand. Allen key . 2" long M8 screw (for desk surface-mounting). 4" long M8 screw (for desk surface-mounting thicker desks). C-Clamp for desk clamping. Fixed mounting plate to mount it into your desk (comes pre-installed to the C-clamp, see our video for how to install). Built-in 6.5 foot XLR cable that is hidden and run inside the boom arm stand. Mic clip.
  • Rockville ROGAN STAND Pro Boom Arm Mic Stand. Includes XLR cable built into the stand that is hidden inside the stand for a clean look. Deluxe pro version is one solid piece with no visible springs and an advanced articulation mechanism..
  • Easily Mounts to the top of a desk (See our install video). Easily clamps to the side of a desk with the included C-Clamp (supports desks up to 2.3” inches thick) . This is made out of aluminum which is rust-free and lighter weight..
  • Arm length: 19" + 19". Position is completely adjustable. Firmly stays in place once you adjust it. There is a safety locking pin for the arm to lock in place (other similar stands do not have this)..
  • Foldable design, just pull the knob in the middle of the stand and it folds in half (Other similar stands do not have this). Standard 5/8” Mic Threads for Connecting Most Podcast and Vocal Microphones. Suitable for st....
Check Stock

Wall Mount Boom Arm - Wall Mount Microphone Holder for Stand, Vertical Surface Mount and Freely Swiveling Metal Wall Mount Clip Suitable for Saves the Desk Space, Mic Stand Accessories by YOUSHARES

  • Wall Mount Boom Arm - Install on the wall, solve the limitation that your desk cannot be installed, liberate your desktop, and bring you more space.(Drill Bit Hole diameter: 15/64" /5.95 mm).
  • Stable installation - Aluminum alloy material, triangular design of the force point of the support base, the mic wall mount is more firm.
  • The concept is different from the mic desk clamp - Compared with the boom arm clamp on the market, it solves the trouble of fracture and displacement.
  • Sponge gasket - Mic wall mount has 2 sponge mats, one side protects the product from abrasion and the other side protects the wall.
  • Protect the mic stand - Built in plastic pad to protect the microphone stand from wear and deformation.
Check Stock

For Shure sm7b mv88+ and mv7 boom arm, Mic desk stand Compatible with Shure sm7b and Shure mv7 Microphone, Shure sm7b and Shure mv7 mic arm perfect for Podcasts, Gaming, Recording.

  • [Strong Compatibility] :For Shure sm7b and mv7 mic boom arm adapter wide compatibility 3/8'' to 5/8'' Screw adapter are line with industry standards.This stand not only compatible with Shure sm7b and mv7 mic, but also suitable for mount most standard-sized microphones..
  • [Easy to use]:This Shure sm7b and mv7 mic Microphone boom arm is simple to set up and demount, you can easily move and carry the microphone stand.Compatible with Shure sm7b and mv7 mic,Suitable for voice-over, Video recording, broadcasting, TV stations for you additional convenience..
  • [Heavy Duty Steel Structure]: Super-strong spring with extra positioning screw, compact microphone arm stand designed for Shure sm7b and mv7 Microphone carry,sturdy enough to keep mic well placed. Max load: Approx.2pound/1kg..
  • [Rugged desk mount]: In comparison to the old versions, this Shure sm7b and mv7 zinc alloy desk mount is built with anti-scratch pad and wider mouth up to 2 inch/5cm to fit most desktop to fix the base..
  • [Various accessories]: The set not includes Shure sm7b and mv7 Microphone.The set includes....
Check Stock