Categories

Best Devcon Underwater Epoxy

MMDENT New Composite Caulk Carpules Syringe Dispenser Gun Unidose Tip Applicator

  • Suitable Cartridge:It's NOT suit for 30cm and it works well on the 50ml kits. Don't be distracted by the plunger diameters as this tool also works on similar material kits with 2:1 and 1:1 ratios., Works replacment for Loctite, replacment for Devcon, replacment for Araldite, replacment for Gorilla, and others with standard 50ml cartridges..
  • Size：Fitting mixing.Applicable Rate: 【1:1 ratio and 1:2 ratio adhesive】 Fitting Capacity of Tube Cartridges : 【50ml Cartridges ONLY】.
  • Thick material: The handle is user-friendly, the appearance is generous, and the push rod is durable and not easy to wear. The cartridge slides in and is held firmly in place with the lever, then you can dispense mixed epoxy smoothly by squeezing the handles together. Note that you will need disposable mixing nozzles too..
  • Specifically used to smear or drip a variety of two-component adhesives or coatings, can completely solve the two-component adhesive products mixed uneven problems..
  • If you have any question, feel free to contact us and we will try our best to give you a satisfactory answer for you..
Check Stock

Brampton Marine Epoxy Strong Bonding for Boat Repair - Bonds in 30 Minutes, Water Resistant, 4 Ounces

  • CAN BE APPLIED UNDERWATER: Unlike many conventional epoxies, Brampton Marine Grade Epoxy can form and maintain bonds underwater. Bonds when fully immersed in both fresh and saltwater. It has excellent tensile strength and impact resistance.
  • EFFECTIVE FOR BOAT REPAIR: Brampton Marine Grade Epoxy is perfect for boats, jet skis, surfboards, and more. It is resistant to petroleum, solvents, and other chemicals. Works on a variety of materials including galvanized steel, fiberglass, graphite, PVC and more..
  • A WEATHER-RESISTANT ADHESIVE: Marine Grade epoxy from Brampton Technology creates an all-weather bond perfect for all kinds of outdoor repairs. This alternative to superglues and other epoxies can withstand extreme conditions of heat, cold, and humidity..
  • READY IN JUST 30 MINUTES: Sets the bond in 15 minutes. Cures in 30 minutes at room temperature..
  • EASY SQUEEZE BOTTLES INCLUDED with 4oz, 16oz and 32oz kits / EASY DISPENSE DOUBLE BARREL CARTRIDGE with .85oz: Mix ratio 1:1 by volume. No tools needed..
Check Stock

TotalBoat TotalProtect Epoxy Barrier Coat System White Quart

  • High-build two part epoxy primer and barrier coat for use above and below the waterline.
  • Excellent for gelcoat blister prevention and repair work on fiberglass boats.
  • Provides superior protection on all underwater metals.
  • Easy to mix and apply by roller or spray. No sanding required. Fast drying primer creates a flexible, durable epoxy barrier coat..
  • Available in White or Gray in Quart or Gallon sizes. Coverage: 225 sq. ft. per gallon (at 7 mils wet). Thinner: TotalBoat Epoxy Primer Thinner 200..
Check Stock

TotalBoat-439900 TotalProtect Epoxy Barrier Coat System (Gray, Gallon)

  • High-build two part epoxy primer and barrier coat for use above and below the waterline.
  • Excellent for gelcoat blister prevention and repair work on fiberglass boats.
  • Provides superior protection on all underwater metals.
  • Easy to mix and apply by roller or spray. No sanding required. Fast drying primer creates a flexible, durable epoxy barrier coat..
  • Available in White or Gray in Quart or Gallon sizes. Coverage: 225 sq. ft. per gallon (at 7 mils wet). Thinner: TotalBoat Epoxy Primer Thinner 200..
Check Stock

TotalBoat-439901 TotalProtect Epoxy Barrier Coat System White Gallon

  • High-build two part epoxy primer and barrier coat for use above and below the waterline.
  • Excellent for gelcoat blister prevention and repair work on fiberglass boats.
  • Provides superior protection on all underwater metals.
  • Easy to mix and apply by roller or spray. No sanding required. Fast drying primer creates a flexible, durable epoxy barrier coat..
  • Available in White or Gray in Quart or Gallon sizes. Coverage: 225 sq. ft. per gallon (at 7 mils wet). Thinner: TotalBoat Epoxy Primer Thinner 200..
Check Stock

All-Fix Epoxy Putty 3 Pound Unit - 2 Pint Set - Underwater Epoxy - All Fix By Cir-Cut Corporation - The All Purpose Epoxy Repair Material - Home - Jewelry Design - Arts & Crafts - 1001 Uses !

  • Cures Underwater! - Great For Underwater& Wet Areas.
  • Rock Hard Cure - Drill - Sand - File - Sculpt - Shape.
  • The Does It All Wonder Epoxy Putty Repair Material.
Check Stock

Oatey 31270 Tubes Epoxy Putty, Display 4-Ounce, Sold as 3 Pack

  • ...y putty turn to light gray. The mixture start hardening after 8 minutes. After 24 hours, plastic epoxy will harden like steel..
  • Superior Performance: Hand mixable 2 part epoxy putty sticks are tough, waterproof and resistant to heat and cold. metal epoxy putty can be cured underwater and can also withstand continuous temperatures from -50°C to 120°C. When epoxy clay putty is fully hardened, it is strong enough to sand, drill, mold and paint..
  • Eco-friendly Formula: Our plastic bonder is made of epoxy resin, which has strong adhesion. And the plastic filler putty does not contain any irritating substances or odors, safe for the elderly and children..
  • Our Promise: Choose us, you will get 120g universal repair filler, scraper*1, disposable gloves*1. We pursue high-quality products and customer service. If you are not satisfied with waterproof putty, feel free to contact us via Amazon and we will provide you with a free replacement and a full refund..
Check Stock

Epoxy Putty, 120g 2 Part Fast Repair Epoxy Glue, Metal, Plastic, Wood, Glass, Ceramic Crack Filler, Heat Resistant and Waterproof (Grey)

  • All Purpose Epoxy Putty: A hand mixable two-part epoxy putty stick quickly repairs and fills anything made of metal, wood, glass, ceramic, stone, and plastic after kneading evenly..
  • Cure TIme: Use a scraper to cut the cement crack filler in 1:1 ratio, knead by hand evenly until the epoxy putty turn to light gray. The mixture start hardening after 8 minutes. After 24 hours, plastic epoxy will harden like steel..
  • Superior Performance: Hand mixable 2 part epoxy putty sticks are tough, waterproof and resistant to heat and cold. metal epoxy putty can be cured underwater and can also withstand continuous temperatures from -50°C to 120°C. When epoxy clay putty is fully hardened, it is strong enough to sand, drill, mold and paint..
  • Eco-friendly Formula: Our plastic bonder is made of epoxy resin, which has strong adhesion. And the plastic filler putty does not contain any irritating substances or odors, safe for the elderly and children..
  • Our Promise: Choose us, you will get 120g universal repair filler, scraper*1, disposable gloves*1. We pursue high-quality products and customer service. If you are not satisfied with waterproof putty, feel free to contact us via Amazon and we will provide you with a free replacement and a full refund..
Check Stock

TotalBoat Aluminum Boat Barrier Coat Quart Gray

  • High-build, two-component epoxy primer and barrier coat for excellent corrosion prevention on aluminum hulls and pontoon boats. Can be overcoated with....
  • Provides superior corrosion protection on all underwater metals.
  • Fast drying, with no sanding needed between coats.
  • Available in Gray in Quart or Gallon size kits. Coverage: Approximately 225 sq. ft./gallon @ 7 mils wet. Thinner: TotalBoat Epoxy Primer Thinner 200.
Check Stock

TotalBoat Aluminum Boat Barrier Coat (Gallon, Gray)

  • High-build, two-component epoxy primer and barrier coat for excellent corrosion prevention on aluminum hulls and pontoon boats. Can be overcoated with bottom paints or other 1- and 2-part paints.
  • Provides superior corrosion protection on all underwater metals.
  • Fast drying, with no sanding needed between coats.
  • Available in Gray in Quart or Gallon size kits. Coverage: Approximately 225 sq. ft./gallon @ 7 mils wet. Thinner: TotalBoat Epoxy Primer Thinner 200.
Check Stock

J-B Weld 8265S Original Steel Reinforced Epoxy Twin Pack - 2 oz (Pack of 6)

  • Fast-Setting, Non-Sag, Machineable, Underwater & Wet, Crystal Clear, Epoxy, Urethane.
  • Slow-Setting, Thin Regular Setting, Toughened, Low-Temperature Setting.
  • Part Numbers: 04001, 04002, 04003, 04004, 04005, 04006, 04007, 04008, 04009, 04040.
  • Full sampler set of popular and useful Hardman Double/Bubble Epoxy & Urethane Packets.
Check Stock

Small Aquarium Underwater Ambience with Very Light Bubbling

  • FOR SCIENTISTS & SERIOUS GROWERS - Designed by world-renowned crop physiologist, Bruce Bugbee, PhD, the MQ-510 full-spectrum underwater quantum meter is the premium tool of choice among leading scientists and serious growers for accurately measuring the photosynthetically active radiation (PAR) underwater..
  • MEASURING PAR IS CRITICAL - An accurate PAR meter is critical for measuring the intensity of light used in the precision growing of plants and other photosynthetic organisms in greenhouses, growth chambers, farms, gardens, aquariums, and additional agricultural systems. Our underwater quantum meters are specifically designed to measure the intensity of light underwater for biological, chemical, and physical processes in natural waters and aquariums..
  • UNDERWATER ACCURACY - Underwater PAR measurements can read low when a quantum sensor is calibrated for air. The MQ-510 applies an immersion effect correction factor to get instant, accurate measurements underwater. Precisely measures and combines the intensity of all photons between 400 and 700 nm to give a single PAR reading in µmol m-2 s-1 within 5 % uncertainty. Unlike hobby-grade PAR meters, our meter has a ....
Check Stock

PC Products PC-Marine Epoxy Putty, 2oz Stick, White (25567)

  • Epoxy putty stick for rapid repairs to wet or dry surfaces.
  • return to service in less than 60 minutes.
  • bonds to tile, fiberglass, concrete, gunite, grout, PVC, wood and various metals.
  • Repair boats, spas, swimming pools, shower basins, stock tanks, copper and PVC pipes.
  • Two-part white epoxy putty for rapid marine, pool, and plumbing repairs on wet, dry, and underwater surfaces.
  • Hand moldable without need for mixing or application tools.
Check Stock