ACEIRMC 3pcs ESP8266 Serial Wireless Module CH340 NodeMcu V3 Lua WiFi Internet of Things New Version Development Board Compatible with Arduino IDE/MicroPython (3pcs)

  • Power your developement in the fastest way combinating with NodeMcu Firmware.
  • Nodemcu Lua Lolin V3 ESP8266 development board is equipped with powerful ESP6266 microcontroller (ESP-12E) with 802.11 b / g / n WLAN and integrated 25dBm antenna. This development board consists of two more microcontroller: flash memory chip is 25Q32 4M (32mbit) and serial chip is upgraded CH340 chip..
  • Modern high level mature LUA based technology. It is an integrated unit with all available resources on board..
  • This wifi development board enables you comfortable prototyping by simple programming via Lua-Script or for Arduino code and breadboard-optimized construction (23 mm pin spacing)..
  • Modern Internet development tools such as Node.js can take advantage the NodeMCU with the built-in API to put your idea on the fast track immediately..
Check Stock

Seeed Studio LoRa-E5 Development Kit - Based on LoRa-E5 STM32WLE5JC, LoRaWAN Protocol and Worldwide Frequency Supported.

  • ✨【Ultra-low Power Consumption and High Performance】LoRa-E5 Mini Development Board is an easy-to-use compact development toolset for you to unlock the powerful performance of the LoRa-E5 STM32WLE5JC. It consists of a LoRa-E5 Mini Board, an antenna(EU868/US915), a USB type C cable, Sticker and a 1X12pin male pin headers..
  • ✨【Easy Testing and Rapid Prototyping】The sleep current of LoRa-E5 modules on board is as low as 2.1 uA(WOR mode). It is a user-friendly board for easy testing and rapid prototyping..
  • ✨【Full GPIOs Led Out to Rich Interfaces】LoRa-E5 Dev Board also has rich interfaces, including RS-485, Grove, and etc. Developed to unlock the full functionality of the LoRa-E5 module, LoRa-E5 Mini Dev Board has led out full 28 pins of LoRa-E5 and provides with rich interfaces including Grove connectors, RS-485 terminal, male/female pin headers for you to connect sensors and modules with different connectors and data protocols, saving your time on wire soldering..
  • ✨【Long-distance Transmission Range to 10km】LoRa-E5 Mini Dev Board features an ultra-long transmitting range of LoRa-E5 up to 10km in an open area, extremely low chip power consumption, and user-friendly interfaces. Note: Ideal value in open area..
Check Stock

ESP8266 ESP-12E NodeMcu Lua WiFi Module Connector Development Board, for Arduino IDE Micropython

  • ESP8266 CP2102 NodeMCU ESP-12E WIFI serial wireless module is an open source Lua based firmware, ultra low cost WI-FI modules, development boards for rapid prototyping, integrated with ESP8266 WIFI chips..
  • Use interactive Lua scripts to write hardware code for Arduino, it offers a complete and self-contained Wi-Fi networking solution..
  • ESP8266 has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIO..
  • The NodeMCU ESP8266 development board programming model is similar to that of Node.js, more open source and interactive, programmable, simple, 4-layer PCB design, small size..
  • The has integrating GPIO, PWM, IIC, 1-Wire and ADC all in one board, without having to press the flash and reset buttons before each flash operation,simultaneity support smart link smart networking..
Check Stock

Hosyond 3Pcs ESP8266 NodeMCU CP2102 ESP-12E Wireless WiFi Module Internet of Things Development Board Compatible with Arduino IDE/Micropython

  • Not only it is easy to program for this controller by using the CP2102-USB interface,but also unnecessary to press the flash and reset buttons before each flash operation..
  • NodeMcu is an open source Lua based firmware for the ESP8266, ultra low cost wireless modules, development boards for rapid prototyping, integrated with ESP8266 chips..
  • The ESP8266 has powerful on-board processing and storage capabilities, and can be integrated with sensors and other application-specific devices through its GPIOs..
  • It is compatible with Arduino IDE,works great with the latest Mongoose IoT/Micropython..
  • Modern Internet development tools can use the built-in API to instantly put your idea on the fast track..
Check Stock

3Pcs ESP8266 ESP-12E,Aideepen NodeMCU ESP8266 30PIN ESP-12E Development Board Wi Fi WLAN WL Module CP2102 for NodeMCU for ESP-12E for Arduin0

  • 【ESP8266】This is ESP8266 V2 Nodemcu Lua development board,works great with the latest Compatible with Arduin IDE/Mongoose IoT/Micropython..
  • 【30PIN】ESP8266 CP2102 chip.it's easy to program,without having to press the flash and reset buttons before each flash operation..
  • 【NodeMcu】NodeMcu is an open source Lua based firmware for the ESP8266, ultra low cost wireless modules, development boards for rapid prototyping, integrated with ESP8266 chips..
  • 【Easy】The ESP8266 has powerful on-board processing and storage capabilities.and has integrating GPIO, PWM, IIC, 1-Wire and ADC all in one board very easy to use..
  • 【Why choose us】You can use it with our development board ASIN B0B85C98FX,to make your project more convenient and efficient.Aideepen specializes in various electronic components,please feel free to contact us..
Check Stock

Blitzway - Inspector Gadget - Inspector Gadget Deluxe Set, 5Pro StudioMEGAHERO Series

  • Thousands of high-tech gadgets protruding from his outstretched fingertips and extending arms and legs..
  • This wonderful action figure which recreates Gadget and his amazing special abilities from the famous animation brings back the heroes of your childhood who linger in your memory..
  • Also, the deluxe version contains the connectable bases with each characters and special speech bubble effects to create more dramatic and entertaining scenes in the play..
  • Blitzway Design & Development Team has gone through various attempts and trials and errors in the prototyping process, and each part has been painstakingly selected in a variety of materials for its purpose, which provides high play value..
  • DX ver. includes 'Special Speech Bubble Effect Parts' and 'Earlybird Bonus' (Special Gadget face and hand).
Check Stock

Developing Computer Skills - Binaural Beat Brainwave Subliminal Systems

  • 【Same function as the original Arduino】It great for learning the basics of how sensors and actuators work, and an essential tool for your rapid prototyping needs.
  • 【CHIP UPGRADE】Upgrade the main control chip to ATMEGA328P-AU.And it same as the original arduino pin layout. It compatible with all expansion boards..
  • 【ADDED A 500MA SELF-RECOVERYFUSE】Compared with the original ARDUINO, a 500ma self-recovery fuse is added, which automatically disconnects the circuit when short-circuited to avoid component damage.Change the plug-in pins of the original ARDUINO to SMD pins to avoid short circuit of the development board contact conductors, which is safer..
  • 【Added 10 LED marquees driven by MOS tubes】which avoids the problem of insufficient output current of the IO port of the single-chip microcomputer, and can directly drive a small DC motor through the IO port..
  • 【EASY TO USE】Change the original USB-B type interface to MICRO-USB interface, which is more convenient to use..
Check Stock

Marvel X-Men Xavier Institute Flight School Blackbird Long Sleeve T-Shirt (Large) Navy

  • ... multiple concurrent AI application pipelines. This means you can develop solutions using your largest and most complex AI models to solve problems such as natural language understanding, 3D perception, and multi-sensor fusion..
  • NVIDIA JetPack SDK brings the NVIDIA AI software stack to Jetson, along with application development and optimization tools. Software for specific use cases is available, including Isaac for robotics and Metropolis for smart cities, and you can save significant time developing your AI solution when you use your datasets with TAO toolkit to fine-tune pretrained AI models from the NGC catalog..
  • Jetson ecosystem partners offer additional AI and system software, developer tools, and custom software development. They can also help with cameras and other sensors, as well as carrier boards and design services for your product..
  • With the computing capability of more than 8 Jetson AGX Xavier systems in a developer kit that integrates the latest NVIDIA GPU technology with the world’s most advanced deep learning software stack, you’ll have the flexibility to create tomorrow’s AI solution as well as today’s..
Check Stock

Gikfun Prototype Shield DIY Kit A1 for Arduino Mega 1280 2560 R1 - R3 (Pack of 2pcs) EK1096x2

  • Prototyping Shield Diy Kits. Great for building your own designed Arduino Uno sheilds..
  • You can solder parts to the prototyping area to create your project, or use it with a small solderless breadboard to quickly test circuit ideas without having to solder..
  • It's got extra connections for all of the Arduino MEGA 1280 / 2560 R1 R2 R3 pins, and it's got space to mount through-hole and surface mount integrated circuits..
  • The Prototyping Shield makes it easy for you to design custom circuits..
  • It's a convenient way to make your custom circuit and Arduino into a single module..
Check Stock

Polk Legend L200 Large Premium Bookshelf Speaker Black

  • New High-Resolution Pinnacle Ring Radiator Tweeter: 40+ years of tweeter innovation, design and prototyping has led to the development of the new 1” high definition Pinnacle ring radiator tweeter. Developed by Polk Audio, it delivers ultra-clear, crisp highs without unwanted coloration or distortions. Hi-Res certified, the Pinnacle Tweeter is designed for today’s two-channel music listening as well as multi-channel 3D audio found in movies, sports and video games soundtracks..
  • New 6.5” Turbine Cone Design: Polk developed the new Turbine cone specifically for the Legend series to ensure the natural reproduction of the mid-range, the frequencies our ears are so sensitive to. The Turbine cone combines Polk’s proprietary foam core and the molded Turbine geometry which dramatically increases stiffness and damping, without adding mass, resulting in a smooth, detailed mid-range and effortless bass – hear every detail..
  • Better Bass by Design with Enhanced Power Port: Traditional bass ports make noise and mask the low frequency bass notes you want to hear. The new enhanced Power Port design smoothly transitions air flow from the speaker into your listening area for louder, cleaner bass while minimizing turbulence, distortion, and port noise. Polk refi....
Check Stock

REXQualis 840 Pieces Breadboard Jumper Wire Kit with 14 Lengths Assorted Jumper Wire for Breadboard Prototyping Solder Circuits

  • Package Includes: Contains 840 pieces U shape preformed breadboard jumper wires, 6 individual clamshell containers each holding 140 pieces jumper....
  • 14 Different Lengths: 2 mm, 5 mm, 7 mm, 10 mm, 12 mm, 15 mm, 17 mm, 20 mm, 22 mm, 25 mm, 50 mm, 75 mm, 100 mm, 125 mm, meet your various experimental....
  • Easy to Use: Each jumper has stripped ends and preformed right-angled leads for easy insertion into your breadboard, make prototyping on a breadboard....
  • Wide Application: with variety of sizes and color design, these breadboards wires are ideal for use with any breadboard, prototyping, prototype....
  • We have always cared about the customer experience and improve the product function details, and also provide quick-responding technical support..
Check Stock

Jameco Valuepro 830-Point Solderless Breadboard 6.5 x 2.125 0.1 spread Ideal for Prototyping and Classroom Projects - WBU-202-R

  • Prototyping made easy: A reusable construction base for prototyping of electronics. Also commonly referred to as a plugboard or terminal array board..
  • Easy Identification: Pins are identified by numnbered rows and columns making working more efficient and less stressful..
  • 0.1 inch spread: The holes in this breadboard are spaced 0.1" which is the most common spacing for breadboards to accommodate standard DIP components..
  • Suited for analog and low frequency circuitry: The breadboard has strips of metal sockets which run underneath the board, yellow rectangles, and....
  • Educational environment: Ideal for STEM projects and classroom atmospheres as it promotes learning and testing. Ideal for high frequency and low noise....
Check Stock

Jameco Valuepro 3220-Point Solderless Breadboard 7.3 L x 7.5 W 0.1 Spread Ideal for Prototyping and Classroom Projects - WBU-208-R

  • Prototyping made easy: A reusable construction base for prototyping of electronics. Also commonly referred to as a plugboard or terminal array board..
  • Easy Identification: Pins are identified by numnbered rows and columns making working more efficient and less stressful..
  • 0.1 inch spread: The holes in this breadboard are spaced 0.1" which is the most common spacing for breadboards to accommodate standard DIP components..
  • Suited for analog and low frequency circuitry: The breadboard has strips of metal sockets which run underneath the board, yellow rectangles, and....
  • Educational environment: Ideal for STEM projects and classroom atmospheres as it promotes learning and testing. Ideal for high frequency and low noise....
Check Stock