Best Device Interface Board
3-Axis 32-bit ARM Based CNC Controller,GRBL 1.1F USB Port CNC Engraving Machine Control Board with Fan Cooling,Support 500W Spindle/NEMA23 Stepper Motor/Laser (A4988+Fan)
- Model:3 Axis GRBL 1.1F USB Port GRBL Control Board.
- Input voltage: 12-24VDC .CNC Router Machine Controller board.
- Compatibility: support 12V/24V laser, TTL/PWM modulation signal, 3P interface and 2P+2P interface.
- support 775 motor, 200W/300W/500W spindle.
- support dual Y-axis use, three-axis and two-axis switching use.
- support X/Y/Z limit switch, Z-axis probe, emergency stop switch.
- Support stepper motor: 12V, within 2A maximum current, within 1.5A recommended. (Stepper motor 42, 57).⚠️Please check the wire sequence when connecting the stepper motor, the wire sequence may be different for different motors, wrong connection may burn the motor and the motherboard..
- Support software：LaserGRBL/Lightburn/Candle(3 axis)/Universal Gcode Sender.
- Tip: Before you connect the motherboard, please carefully check the need to connect the device wire sequence (laser, motor) to prevent a mismatch of wire sequence, burn the device. Customer service 24H online, to provide you with help..
Check Stock
Module A9G Board, A9G Development Board GSM/GPRS + GPS/BDS Module Wireless Data Transmission + Positioning Board
- ★[A9G Development Board] – The A9G development board is a versatile development board based on A9G GPRS / GSM + GPS / BDS module that can be used to validate the basic communication functions and peripheral functions of the A9G module..
- ★[Multifunction] – A9G development board with the basic phone / SMS, GPRS networking communications, GPS / BDS dual-mode positioning capabilities..
- ★[Specification] – A9G development board contains a lithium battery charging management, microphone, speaker interface, USB communication interface, multiple user keys / led, TF card slot, accelerometer, I2C2 interface, ADC interface..
- ★[External Interface] – A9G development board camera expansion board, an external 30W / 200W camera.A9G development board coin machine expansion board, can be external traditional coin machine..
- ★[After-Sale Service] — Good day. every effort to provide customers with satisfactory service.If you have ANY questions, please email us and BELIEVE us, we will reply you soon..
Check Stock
Mixer Audio Interface Effects,Remall Podcast Mixer Sound Effects Board with DJ Sound Mixer,Voice Changer Bletooth V9 Sound Card Streaming Studio Equipment Gaming
- 【Professional Metal Podcast Mixer Audio Interface】REMALL V9 Sound Card Set Used Metal Material,The Sound qulity is more Clear and bass-heavy than the ABS.the Powerful Four-Core DSP chip noise reduction inside,with stable signal, nice sound quality and without delay, 50% increase in noise reduction with RT.1200 MA large capacity battery..
- 【Professional Sound Effects Board】This multifunctional bluetooth 5.0 sound effects board can be used for DJ Mixer, music studio recording, condenser podcast microphone, karaoke online, podcast mixer, mic, singing, k song, live stream, TikTok and YouTube streaming, guitar, Facebook, anchor, voice mixing, home audio recorder. Music V8 mixer board is also a voice changer for gamer to play games online..
- 【Voice Changer Sound Board Mixer】REMALL sound effect board has 7-color atmosphere light, changes with the music, with 6 modes and 12 sound effects, makes the same atmosphere effect as you have a party or a bar. Voice Changer Four magic sound mode switchable: Male/Female/Children/magic voice..
- 【Multi-Device Support】REMALL podcast equipment sound effects device can be used on any mobile phone, PC,computer, tablet iPad, PS4, Xbox, Switch, Apple iOS systems, Android systems and Any game platform，voice mixer fo....
Check StockANNOYTOOLS ARM 32-bit 3-Axis CNC Controller,GRBL 1.1F USB Port CNC Engraving Machine Control Board with Fan Cooling DRV8825 Standalone Driver,Support 500W Spindle/NEMA17/23 Stepper Motor/Laser Module
- Model:3 Axis GRBL 1.1F USB Port GRBL Control Board.
- Input voltage: 12-24VDC .CNC Router Machine Controller board.
- Compatibility: support 12V/24V laser, TTL/PWM modulation signal, 3P interface and 2P+2P interface.
- support 775 motor, 200W/300W/500W spindle.
- support dual Y-axis use, three-axis and two-axis switching use.
- support X/Y/Z limit switch, Z-axis probe, emergency stop switch.
- Support stepper motor: 12V, within 2A maximum current, within 1.5A recommended. (Stepper motor 42, 57).⚠️Please check the wire sequence when connecting the stepper motor, the wire sequence may be different for different motors, wrong connection may burn the motor and the motherboard..
- Support software：LaserGRBL/Lightburn/Candle(3 axis)/Universal Gcode Sender.
- Tip: Before you connect the motherboard, please carefully check the need to connect the device wire sequence (laser, motor) to prevent a mismatch of wire sequence, burn the device. Customer service 24H online, to provide you with help..
Check Stock6 PCS 28BYJ-48 ULN2003 5V Stepper Motor + ULN2003 Driver Board for Arduino
- ❃❃ The stepping motor is a kind of mechanical and electrical device that converts electrical pulses into angular displacement. Come with a standard interface, when used directly pluggable..
- ❃❃ Drive Module Board Size(in): 1.37 * 1.18 * 0.6(in).
- ❃❃ A, B, C, D four-phase LED indicates the status of the stepper motor work..
- ❃❃ 5 line 4 phase can be used for ordinary ULN2003 chip driver, Connect to the 2 phase, Support the development board, With convenient use, direct docking..
- ❃❃ Great packing in a box : 6 PCS ULN2003 Stepper Motor + Driver Board (with a little gift)..
Check StockSparkFun XBee Explorer Dongle - Red
- UART communication board, XBee interface, USB interface.
- XBee USB Adapter is a UART communication board which supports XBee connectivity, features UART interface, USB interface, and onboard buttons/LEDs,....
- Test XBee modules: onboard buttons/LEDs for easy testing. Program/Configure XBee modules: make it easy to program/configure the XBee modules....
- USB to UART module: features CP2102, provides UART interface and power output interface, connect it to your system easily.
- Note:The XBee/ZigBee modules and Core2530 (B) in the photos are NOT included..
Check Stock3D Tech Earth
- - Fabulous 3D transition effects on screens and folders switching..
- - Elegant and simple 3D screen navigation..
- - Screen management interface with 3D effect..
- - Astonishing 3D clock widget and neon circuit board weather widget..
- - Dynamic display on All Apps alphabetical list, or “App drawer”..
- - Very small, will not affect system performance..
Check Stock
WSDMAVIS 1 Pcs SD Card to IDE Adapter 2.5 Inch 44Pin Male Adapter SD SDHC SDXC MMC Memory Card Converter to Laptop HDD
- Use this product to convert SD card into 2.5inch 44pin IDE interface.There are two main control chips on this board, and there is an SD card socket on the back..
- Compliance with SD specification Ver2.0, IDE/ATA-33 specification.Standard IDE interface interface: true-IDE mode, and supports DMA-33 transfer mode.
- The IDE interface is a 44-pin/2.0mm male connector..
- The SD card can become an OS and application software that can directly start the device.
- Support DMA and ULTRA DMA mode, suitable for DOS, NT4, WINDOWS98SE, ME, 2000, XP, VISTA, MAC, Linux systems..
- Installation method:First install the SD card into the product slot, and then connect the hard drive data cable to the interface of the notebook hard drive. It can be operated and used after the power-on test is normal..
- Note: for soft routing, the size of the SD card should be within 1G. For example, if WIN98, WIN ME, WINXP, and the system are installed, the SD card capacity should be more than 2GB. If you require high speed, please choose a high-multiplier flash memory card.Maximum support 128G SD card..
Check Stock
KEYESTUDIO MEGA Sensor Shield V1 for Arduino MEGA R3 2560 Prototype Board Projects
- Nice Sensor shield of MEGA Rev3, Easy prototyping and Very convenient especially for 3PIN (G V S) connections. There are tons of ground and VCC headers making really it easy to connect various Arduino modules and sensors with DuPont style cables..
- This sensor shield board really simplify the circuit and easily connect commonly used sensors.The board is having digital and analog interface, Bluetooth module communication interface, SD Card module communication interface, APC 220 radio frequency module interface, etc..
- This sensor shield allows ease development and prototyping and makes convenient way to connect many external devices/sensors..
- This board works well for prototyping or certain permanent applications and a very handy companion to an Mega Rev3 or compatible board..
- 100% Compatible with the programming software for Arduino. Excellent shield board in good quality and packaged in a nice box! Great for all kinds of scientific experiment research for Arduino.
Check StockVU Meter 2x Panel VU Meter Warm Back Light Recording & Audio Level Amp with Driver Board
- L/GND/R: This driver board with low level signal input terminals for connections are CD players, computer sound cards, the first stage, and other audio signal source device, wiring L, GND, RW respectively: Left, the right channel.
- Power Consumption:Input AC / DC 12V-15V power supply for the drive plate. (Recommended independent power transformer, or a separate power supply for the winding. the backlight current is 45 mA when drive plate off work.
- 2 Resistor:R1 and R2 are two adjustable resistors of driver board,which can control the size of the hands swing..
- Rectifier RegulatorThe backlight DC12V power meter is used for rectifier regulator of the backlight driver board Please notice that the positive and negative head interface..
- Package Content:2 x VU Panel Meter+1 x Driver Module+1 x Cable.
Check Stock
Hilitand OSSC Add On Board, Dual Modes Linedouble Smoothing HD OSSC to SCART or Component Video Converter with Compound S Video for NTSC PAL Game Console
- ...s looking for the highest compatibility possible. The output resolution of this device is only up to 480p, 576p..
- Pass Through Mode: The OSSC add on board is placed in pass through mode (1x mode), the incoming composite or S video signal is simply transparent and converted to RBGS, YPBPR (output via SCART, Component interface). The perfect transcoder for use with 15 kHz displays like PVM or OSSC..
- Glabrate Mode: Glabrate mode is purely based on preference, as the average retro gamer prefers glabrate mode for 2D games (for Genesis, etc.) and flat mode for 3D games (for N64, for Saturn, etc.). However, glabrate mode may help reduce flickering in some 480i only games..
- Regional Compatibility: The OSSC add on board has low latency, supports NTSC and PAL signals, but cannot convert each other. This means that you can plug in any signal that the target device is compatible with, but NTSC signals may not work with PAL devices and the reverse is also true..
Check Stock5V ESP8266 Dual Channel WiFi Relay Module IOT Smart Home Phone APP Remote Switch with 100M Transmission Distance
- ON-BOARD ESP-01 WIFI MODULE: The relay board is equipped with on-board ESP-01 WiFi module and high performance microprocessor STM8S103..
- UART DEBUG INTERFACE: The relay has reserved UART debug interface and STM8 SWIM program download interface..
- SMART CONFIG TECHNOLOGY: The module uses smart config technology to complete the account and password configuration on the APP ESP-01 WiFi module on the mobile phone, and configure the username and password memory functions..
- ON-BOARD 5V RELAY: This relay module adopts On-board 5V,10A250V AC 10A30V DC relay, which can continuously pull 100,000 times with diode discharge protection and short response time..
- WORKING STATUS INDICATOR: The module has board mode selection and real-time working status indicator..
Check Stock
OSSC Open Source Scan Converter, Dual Modes OSSC Add On Board HD Video Converter with SCART, OSSC SCART Component Converter with S Video for NTSC PAL Retro Gaming Game Console
- ...s looking for the highest compatibility possible. The output resolution of this device is only up to 480p, 576p..
- Pass Through Mode: The OSSC add on board is placed in pass through mode (1x mode), the incoming composite or S video signal is simply transparent and converted to RBGS, YPBPR (output via SCART, Component interface). The perfect transcoder for use with 15 kHz displays like PVM or OSSC..
- Glabrate Mode: Glabrate mode is purely based on preference, as the average retro gamer prefers glabrate mode for 2D games (for Genesis, etc.) and flat mode for 3D games (for N64, for Saturn, etc.). However, glabrate mode may help reduce flickering in some 480i only games..
- Regional Compatibility: The OSSC add on board has low latency, supports NTSC and PAL signals, but cannot convert each other. This means that you can plug in any signal that the target device is compatible with, but NTSC signals may not work with PAL devices and the reverse is also true..
Check Stock
