Categories

Best Dewalt Wet Tile Saw

Tile Cutters Tile Tools for Cutting Ceramic Tile Glass Tile Cut Straight Lines and Curved Lines Cleanly No Wet Saw No Mess Cut Faster and Cleaner than a Wet Tile saw Replaceable Blade Cuts 1000 Feet

  • For Straight Lines And Up to A Quarter Circle Curve The Tile Cutter Is Great, For Semi Circles Inside Corner Cut Outs Around Outlets Doorways And Toilets You Will Want Kit 1 With Tile Hack Saw Blade For Wall Tile And 4 1/2" Grinder Diamond Tile Blade For Porcelain And Floor Tile, Kit 2 Has Tile Drill Bits For Ceramic And Diamond Drill Bits For Porcelain And Glass To Drill Holes For Grab Bars Shower Doors And Towel Rails, Kit 3 Includes Diamond Tile Hole Saw And Guide For Shower Head Or Faucets..
  • No Wet Saw Rental No Messy Tile Saw, Even Professional Tile Setters Don't Like the Mess a Wet Tile Saw Makes and Even the Best Diamond Blades Can Chip the Edges of The Tiles Forget About Cutting Glass Mosaic Backsplash Tiles on Mesh with Water Saw They Chip Scrunch Up Fly Away and When They Get Wet, They Fall Off Anyway. So, You End Up Pushing Each Tiny Tile Through the Wet Saw with What’s Left of Your Fingers. So, No More Running in And Out the House with Every Tile for Every Single Cut..
  • Not the Old-Fashioned Glass and Tile Cutter It's Not Sharp Its Hard, You Must Apply Pressure to Tile Cutting Wheel to Work Only Work If You Soak Cutter Wheel in Oil and Keep Oiling.....
Check Stock

Khanka Hard Tool Case replacement for DEWALT DCS380B/DCS380P1 Cordless Reciprocating Saw

  • Sleek design, a case designed for dewalt reciprocating saw dcs380b , fits perfectly. The hard shell of this dewalt cordless sawzall is black and the zipper is yellow. You can put the dewalt cordless reciprocating saw in a hard case specially designed for the dcs380b for easy portability when you go out..
  • This dewalt reciprocating saw dcs380 hard case, the interior is made of high quality velvet, the soft inner structure ensures the protection of the dewalt reciprocating saw cordless. The dewalt recip saw has a hard case with a mesh design on one side to store your sawzall dewalt 20v accessories and soft storage on the other side for your dewalt reciprocating saw 20v..
  • This dewalt sawzall 20v hard shell case is made of high quality EVA material, which is shockproof, dustproof and waterproof, it can protect your dewalt 20v sawzall from shocks and splashes when you go out to carry. Put the 20v dewalt sawzall in the box after using the dewalt reciprocating saw at home to prevent the dewalt reciprocating saw 20v max from accumulating dust.
  • This hard case designed for dewalt 20v reciprocating saw keeps your dewalt reciprocating saw dcs380b safe, convenient and lightweight. The classic zipper design makes it easy to open and close. This dewalt reciprocating sa....
Check Stock

Ceramic Tile Cutter Tile Saw Tile Tools Kit 1 Tile Cutter Hand Tool, 1 Tile Saw 1 Diamond Blade 4.5 For Cutting Porcelain Tile Cut Straight Curves Corners and Outlets in Center Tile Without a Wet Saw

  • TILING KIT 1 1x AMAZING TILE AND GLASS CUTTER, 1x TUNGSTEN CARBIDE GRIT ROD SAW BLADE,1x GRINDER BLADE for Outlets and Corners in Floor Tile And Porcelain. 1x BOTTLE OF OIL FOR GLASS CUTTER, 1x INSTRUCTIONS AND HOW TO VIDEO LINKS LIFETIME GUARANTEE.
  • NO WET SAW RENTAL NO MESSY TILE SAW CUTTER : Even Professional Tilers don't like the mess a wet saw makes and that even the best diamond blades can chip the edges of the tiles, and forget about cutting glass mosaic backsplash tiles on a mesh with a water saw, they chip, scrunch up, fly away, and when they get wet they fall off anyway. So you end up pushing each tiny tile through the wet saw with what’s left of your fingers..
  • NO RUNNING IN AND OUT THE HOUSE From the Basement or The Driveway, Trailing Through The House Up and Down The Stairs in the Freezing Rain or Burning Sun a Thousand Times with Every Single Tile For Every Single Cut, You Can't use a Wet Saw in The House - She Won't Let You ! She’s Right It's Way Too Messy! And If you do, you’ll be in Marriage Guidance, and still be finding bits 20 years from now.
  • HOW TO CUT GLASS MIRROR STAINED GLASS SHEETS With Other Hints Tips And Trade Secrets. Do You Know Anybody That Didn’t Break The Last Piece Of Glass They Tried To Cut? That's Because 99% Of....
Check Stock

Super Thin 7" Diamond Ceramic Saw Blade Porcelain Cutting Blade for Cutting Ceramic Or Porcelain Tile

  • 【Size & Material】: This tile blade is made of quality metal alloy with diamond grains, which is durable and high strength. Available in various sizes to choose, the size is: 180 x 10 x 1.4 x 22.23mm, Thickness: 1.4mm, Outer Diameter:105mm /7 inch, 7/8” arbor, Diamond concrete saw blade has a tough body with 1.4mm thickness..
  • 【Tile Saw Blade Wet & Dry】: This 7inch tile blade features a 10mm diamond rim, Super thin porcelain saw blade with free chips for cutting, Matched with hand-held machine with a 7/8" or 5/8" Arbor, It can be used on different types of angle grinders and tile cutters, Ideal for Wet and Dry cutting. Furthermore, it is easy to install and ready to use..
  • 【Turbo Rim Design 】: The wet saw blade has turbo rim edge help to increase the work efficiency, strong body and excellent material formula, high quality diamonds can efficient cutting and provide longer service life. They have the right thickness, thin enough to minimize loss of material but thick enough not to drift during cuts..
  • 【High Performance】: Diamond saw blades comes with X teeth offer fast and smooth cutting. High-Performance diamond matrix provides long life and enhanced material removal. this blade cuts through porcelain like butter. 1.4mm thickness can keep ....
Check Stock

5pcs Mixed Universal Carbide oscillating Tool Blades Set for Tile Grout Mortar Concrete Masonry

  • [Compatible With Most Oscillating Tools] This mixed carbide multi-tool blades set is compatible with the majority of the oscillating tool brands such as Fein Multimaster, Ryobi, Hitachi, Chicago, Mastercraft, Milwaukee, Ridgid, Black & Decker, Rockwell, Dewalt, Einhell, Porter Cable, Craftsman and more..
  • [Widely Use Range] This Universal Fit Carbide Saw Blade is a wide use blade that quickly removes material such as grout, plaster and other adhesive products from floor or wall tiles during replacement or restoration projectscontain. It also can meet a variety of needs, which could be used for workshop, household or other place..
  • [Customer Guaranteed] We provide high super Customer Service. If you are not satisfied with our oscillating saw blades for any reason, please don't hesitate to contact us, we will take care it for you with 24 ours..
Check Stock

Lackmond Beast Pro 7 Wet/Dry Porcelain Turbo Mesh Saw Blade - 7 Tile Cutting Tool with Quick Cooling Mesh Rim & 7/8 - 20mm - 5/8 Arbor - BPM7

  • TURBO MESH CONFIGURATION – The unique turbo mesh rim significantly aids in cooling the blade, resulting in longer blade life and extremely clean/....
  • ASSORTED TILE APPLICATIONS – Designed to be used on porcelain tile, ceramic tile, marble, granite and other natural stone.
  • BUILT FOR THE PROFESSIONAL – This is the ideal diamond saw blade for tile workers, construction workers, carpenters, general contractors, serious....
  • EQUIPMENT – For use on Tile saws, circular saws, and hand grinders.
  • WET OR DRY SAW BLADE – 4"-7” BLADES can be used wet or dry. 10” blade is for wet only.
Check Stock

GoYonder 7 Tile Saw Blade Wet for Angle Grinder, Super Thin Diamond Saw Blade Grinder Blades for Wet Dry Cutting, Diamond Blade for Cutting Ceramic, Porcelain, Tiles, Granite, Marbles (Blue, 7\)

  • 【Excellent Tile Blade】: The 7” tile saw blade is made of extended performance diamond matrix, which is fairly durable long lasting. Size:180 x 10 x 1.2 x 22.23mm, Thickness: 1.4mm, Outer Diameter: 180mm (7 inch), with 7/8" or 5/8" Arbor, Max speed 13200 RPM. 80m/s. Its great at cutting tile and stone without chipping the finished surface..
  • 【Precise and Clean Cuts】: Our 7” diamond saw blade has a strong core it’s slightly thicker than other blades to have a fine cut and almost no chip-out. Moreover, This little tile cutting blade has 1.4mm thickness runs smooth fast and quiet actually. they have the right thickness, thin enough to minimize loss of material but thick enough not to drift during cuts..
  • 【Widely Application】: This diamond blade can be used to cut porcelain tile, Granite, Marble, sandstone quartz, brick, slate, cement backer board and other thin masonry blade with. Went through many materials easily like it was butter. It will be a perfect partner for tile installers and general homemade DIY..
  • 【X Teeth Rim Design】: The tile saw blade wet has X Teeth rim edge help to increase the work efficiency, strong body and excellent material formula, high quality diamonds can efficient cutting and provide longer service life. Warm P....
Check Stock

Lackmond Beast Pro 4.5 Wet/Dry Porcelain Turbo Mesh Saw Blade - 4-1/2 Tile Cutting Tool with Quick Cooling Mesh Rim & 7/8 - 20mm - 5/8 Arbor - BPM4.5

  • TURBO MESH CONFIGURATION – The unique turbo mesh rim significantly aids in cooling the blade, resulting in longer blade life and extremely clean/....
  • ASSORTED TILE APPLICATIONS – Designed to be used on porcelain tile, ceramic tile, marble, granite and other natural stone.
  • BUILT FOR THE PROFESSIONAL – This is the ideal diamond saw blade for tile workers, construction workers, carpenters, general contractors, serious....
  • EQUIPMENT – For use on Tile saws, circular saws, and hand grinders.
  • WET OR DRY SAW BLADE – 4"-7” BLADES can be used wet or dry. 10” blade is for wet only.
Check Stock

Lackmond Beast Pro Hard Porcelain Turbo Saw Blade - 7 Hard Tile Cutting Tool with Narrow Slot Turbo Rim & 5/8 Arbor - BPT7

  • TURBO CONFIGURATION – For precise cuts in hard porcelain and ceramic tiles. The Turbo blades are engineered with a thin, narrow slot-turbo rim which....
  • ALL PURPOSE – Suitable for use on all types of ceramic and porcelain tiles.
  • BUILT FOR THE PROFESSIONAL – This is the ideal diamond saw blade for tile workers, construction workers, carpenters, general contractors, serious....
  • WET OR DRY SAW BLADE – 4”-7” blades for wet use only. 7”+ can be used both wet and dry.
Check Stock

Lackmond Beast Pro Hard Porcelain Turbo Saw Blade - 5 Hard Tile Cutting Tool with Narrow Slot Turbo Rim & 7/8 - 20mm - 5/8 Arbor - BPT5

  • TURBO CONFIGURATION – For precise cuts in hard porcelain and ceramic tiles. The Turbo blades are engineered with a thin, narrow slot-turbo rim which....
  • ALL PURPOSE – Suitable for use on all types of ceramic and porcelain tiles.
  • BUILT FOR THE PROFESSIONAL – This is the ideal diamond saw blade for tile workers, construction workers, carpenters, general contractors, serious....
  • WET OR DRY SAW BLADE – 4”-7” blades for wet use only. 7”+ can be used both wet and dry.
Check Stock

GoYonder Super Thin 4.5\ Grinder Blades Tile Blade, Diamond Saw Blade for Cutting Porcelain Tiles Granite, 115mm Tile Cutting Blade for Angle Grinder

  • 【Size & Material】: This tile blade is made of quality metal alloy with diamond grains, which is durable and high strength. Available in various sizes to choose, the size is: 115 x 10 x 1.2 x 22.23mm, Thickness: 1.2mm, Outer Diameter:115mm /4.5 inch, 7/8” arbor, Diamond concrete saw blade has a tough body with 1.22mm thickness..
  • 【Grinder Blades Wet & Dry】: This tile blade 4.5 features a 10mm diamond rim, Super thin porcelain saw blade with free chips for cutting, Matched with hand-held machine with a 7/8" or 5/8" Arbor, It can be used on different types of angle grinders and tile cutters, Ideal for Wet and Dry cutting. Furthermore, it is easy to install and ready to use..
  • 【Turbo Rim Design 】: The wet tile cutting blade has turbo rim edge help to increase the work efficiency, strong body and excellent material formula, high quality diamonds can efficient cutting and provide longer service life. They have the right thickness, thin enough to minimize loss of material but thick enough not to drift during cuts..
  • 【High Performance】: Diamond saw blades comes with X teeth offer fast and smooth cutting. High-Performance diamond matrix provides long life and enhanced material removal. this blade cuts through porcelain like butter. 1.2mm thickness....
Check Stock

3pcs 4.5 Inch Diamond Saw Blade Tile Blade, SUNJOYCO Diamond Cutting Wheel for Angle Grinder, Dry Wet Smooth Cutting for Porcelain Tile Concrete Granite Ceramic Masonry, 4/5\-7/8\ Arbor

  • SPECIFICATION: Diameter: 4-1/2inch (115mm). Arbor: 7/8 inch and reducing ring 4/5 Inch. Thickness: 1.2mm ( 1/2 inch). Increase Segement:10mm (2/5 inch). Fit for most tile saws and hand-held angle grinders with a 7/8 inch to 4/5 Inch arbor..
  • UPGRADE DESIGN: This diamond saw blade is super thin and provides a precise, smooth, chip-free cutting experience for you. The X-teeth rim of the tile cutting tools can speed up the cutting speed. Thicker center to avoid vibrations and wobbling. 8 Cooling holes ensure longer service life. It can be dry-cut or wet-cut, and the cutting effect is better with water..
  • WIDE APPLICATIONS: This super thin tile blade is designed for cutting ceramic, porcelain tile, granite, marble, and vitrified tile, brick, sandstone. It can work as a porcelain tile blade, ceramic tile cutter, granite blade, and other thin masonry blades. It's an ideal diamond saw blade for tile installers, contractors, homemade DIYers, and tradesmen..
  • HIGH QUALITY: This diamond blade for tile is well made and has brilliant safety and durability. High-quality diamond material makes sure it lasts longer and causes less heat and very little wear when cutting. it also meets the demands of dry and wet cutting..
  • SATISFACTION GUARANTEE: We provide a two-year warran....
Check Stock

Tysun 5 Pcs 4.5 inch Diamond Saw Blade Tile Blades Cutting Disc Wheel for Cutting Porcelain Tiles Granite Marble Ceramics

  • ★【High Quality】Super thin and unique X-style teeth for high performance, offer fast and smooth cutting. Thicker center to avoid vibrations and wobbling..
  • ★【Size】Outer Diameter: 115mm (4.5 inch). Core: 22MM(Come with 20MM Ring). Thickness: 1.2mm. Suitable for most tile saws and hand-held angle grinders with a 7/8" and 4/5" Arbor..
  • ★【Compatible with】It can be used on different types of angle grinders and tile cutters for Wet and Dry cutting..
  • ★【Wide Applications】Universal for dry or wet cutting. Tysun diamond saw blade is engineered for extremely smooth cutting of porcelain, granite, marble, ceramic tile, etc..
  • ★【Package Includes】5 Pcs 4.5 inch Tile Cutter Diamond Saw Blades..
Check Stock