Categories

Best Diagnostic Multiplexer

6pcs CD74HC4067 CMOS 16 Channel 16 CH Digital Analog Multiplexer Breakout Module for Arduino

  • This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067..
  • Use the CD74HC4067 16-channel analog signal switch.
  • Analog signal input: C0-C15 16 channels..
  • IT can be used the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067..
  • Wide operating temperature range: -55C to 125C.
Check Stock

100PCS CD4053 CD4053B CD4053BE DIP-16 Analog Multiplexer IC

  • It is suitable for digital and analog signals (voltage cannot be higher than VCC) and can be connected in either direction. To control this, please connect the four digital outputs to the address selection pin of the chip (SO-S3) and send it the binary address of the desired channel..
  • The internal switch is bidirectional, with a low on resistance and off leakage, and to prevent talk, please turn off the switch first and then on..
  • Drive it to a high level, and it will completely disconnect the common pins (all switches are disconnected)..
  • This is a very convenient 16 channel CD74HC4067 analog/digital multiplexer/demultiplexer..
  • Because the multiplexer can also process digital signals, you can use it to transfer TTL-level serial data to multiple devices through pipe or transfer from multiple devices..
Check Stock

Analog Multiplexer Single 8:1 ñ9 Volt 20 Volt 16-Pin Plastic DIP Tube

  • The internal switch is bidirectional, with a low on resistance and off leakage, and to prevent talk, please turn off the switch first and then on..
  • It is suitable for digital and analog signals (voltage cannot be higher than VCC) and can be connected in either direction. To control this, please connect the four digital outputs to the address selection pin of the chip (SO-S3) and send it the binary address of the desired channel..
  • Drive it to a high level, and it will completely disconnect the common pins (all switches are disconnected)..
  • Because the multiplexer can also process digital signals, you can use it to transfer TTL-level serial data to multiple devices through pipe or transfer from multiple devices..
  • This is a very convenient 16 channel CD74HC4067 analog/digital multiplexer/demultiplexer..
Check Stock

Treedix TCA9548A I2C Multiplexer Breakout Board 8 Channel Expansion Board with pi Header for Arduino

  • The TCA9548A Breakout board supports communicating with multiple I2C devices with the same address, making it easy to interface with them..
  • TCA9548A multiplexer features: bidirectional eight-channel I2C multiplexer, active low reset input.
  • The default address of this expander is 0x70, the address can be changed, and can be set within 0x70~0x77..
  • In the address of 0x70~0x77, 8 expanders can be cascaded, and each expander can be connected to 8 devices with the same address, so that the same I2C port can be connected to 64 devices with the same address and can be used normally..
  • The chip is compatible with 3V and 5V and can be used with any logic level.
Check Stock

Installer CCTV 4CH Video Color Quad Multiplexer with Loopout Remote Control and Free 1 Amp Power Adapter

  • The 4Ch Video Color Quad Multiplexer allows several video signals from CCTV security cameras or other analog video devices to be combined and displayed on one monitor. The video processors are also commonly referred to as video mux, CCTV multiplexer, or color quad processor..
  • Full screen displays at real-time refresh rate for each channel. Multiple and automatic display by turn mode: 4Ch, 2Ch, Single Channel.
  • Camera title, time and date display for easy identification, 4 Channel BNC input and 2 Video BNC outputs.
  • Switch between NTSC and PAL system. Picture in Picture show, PIP position switched (top left, top right, bottom left, bottom right corner). High-Resolution Picture show, Adjust individual resolution. High-quality Screen Freeze function..
  • Free 1Amp Power Adapter and remote control Included.
Check Stock

OEM Nexperia 74HC4067PW,112, Analog Switch/Analog Multiplexer Single 16:1 24-Pin TSSOP Bulk (100 Items)

  • Because the multiplexer can also process digital signals, you can use it to transfer TTL-level serial data to multiple devices through pipe or transfer from multiple devices..
  • This is a very convenient 16 channel CD74HC4067 analog/digital multiplexer/demultiplexer..
  • The internal switch is bidirectional, with a low on resistance and off leakage, and to prevent talk, please turn off the switch first and then on..
  • It is suitable for digital and analog signals (voltage cannot be higher than VCC) and can be connected in either direction. To control this, please connect the four digital outputs to the address selection pin of the chip (SO-S3) and send it the binary address of the desired channel..
  • Drive it to a high level, and it will completely disconnect the common pins (all switches are disconnected)..
Check Stock

Analog Demultiplexer, CD74HC4067 High Speed Analog Multiplexer Two-Way Connection Analog Multiplexer High Speed for Digital and Analog Signals

  • Because the multiplexer can also process digital signals, you can use it to transfer TTL-level serial data to multiple devices through pipe or transfer from multiple devices..
  • This is a very convenient 16 channel CD74HC4067 analog/digital multiplexer/demultiplexer..
  • The internal switch is bidirectional, with a low on resistance and off leakage, and to prevent talk, please turn off the switch first and then on..
  • Drive it to a high level, and it will completely disconnect the common pins (all switches are disconnected)..
  • It is suitable for digital and analog signals (voltage cannot be higher than VCC) and can be connected in either direction. To control this, please connect the four digital outputs to the address selection pin of the chip (SO-S3) and send it the binary address of the desired channel..
Check Stock

10 PCS Analog Multiplexer,Breakout Board Module,CD74HC4067 High Speed CMOS 16-Channel Analog Digital Multiplexer Demultiplexer,Suitable for Digital and Analog Signals

  • Because the multiplexer can also process digital signals, you can use it to transfer TTL-level serial data to multiple devices through pipe or transfer from multiple devices..
  • It is suitable for digital and analog signals (voltage cannot be higher than VCC) and can be connected in either direction. To control this, please connect the four digital outputs to the address selection pin of the chip (SO-S3) and send it the binary address of the desired channel..
  • This is a very convenient 16 channel CD74HC4067 analog/digital multiplexer/demultiplexer..
  • The internal switch is bidirectional, with a low on resistance and off leakage, and to prevent talk, please turn off the switch first and then on..
  • Drive it to a high level, and it will completely disconnect the common pins (all switches are disconnected)..
Check Stock

AITRIP 12PCS TCA9548A I2C IIC Multiplexer Breakout Board Module 8 Channel Expansion Development Board for Arduino

  • The TCA9548A adapter is connected to an I2C device with multiple identical addresses on the same I2C port on the main control board for normal communication and use.There are 8 I2C interfaces on one expander, and there are eight bidirectional transfer switches that can be controlled by I2C bus. This means that after 1 expander is transferred, 8 identical addresses can be connected to the same I2C port..
  • Expansion board TCA9548A compatible with IIC bus and system management bus (SMBus), active low reset input, support for hot insertion, low standby current, no glitch during power-up, support for voltages between 1.8V, 2.5V, 3.3V and 5V buses Level shifting, TCA9548A I2C IIC multiplexer breakout board depending on the contents of the programmable control registers, any single SCn/SDn channel or combination of channels can be selected..
  • 12pcs TCA9548A I2C IIC Multiplexer Breakout Board 8 Channel Expansion Board for Arduino.
Check Stock

obd1 to obd2 Adapter,for GM OBD1 12 Pins to OBD2 16 Pins Diagnostic Tool Connector Adapter Cable

  • 【Specifically for】Car Diagnostic Extension Cable has high practicality, which is used specifically for connecting your scanner and your vehicle, specifically for GM vehicles.Please note that this item is just a cable, not a scanner or diagnostic tool..
  • 【Product Specification】Type: cables, adapters & sockets, connector: GM 12 pins male, connector.
  • OBDII 16pins female connector, car maker: Compatible with GM, item length: 41.5cm / 16.3", package weight: 102g..
  • 【Standard Specification】OBD1 12 Pins to OBD2 16 Pins Conform to strict quality control standards,12 Pins to 16 Pins Diagnostic Cable dependable to use.Car 12 Pins To 16 Pins OBD Cable Manufactured according to the original specifications.Built to meet standard specification,GM 12 Pins To 16 Pins Cable strictly follow factory quality control..
  • 【Easy to Use】12 Pin to 16 Pin OBD1 OBD2 Connector Adapter Cable is easy to use, its GM 12 pins allows you to connect a GM vehicle with a OBD1 12 pins socket with your existing OBD2 16 pins tool....
Check Stock

PHion Balance Diagnostic Ph Test Strips 4.5 - 9.0 ph Range 90-Count

  • Super-sensitive pHion Diagnostic pH Test Strips give you an extremely accurate reading of how acidic or alkaline your tissues really are.
  • No guesswork. Because pHion Diagnostic pH Test Strips measure tight 0.25 increments, youll know exactly what your pH is.
  • Unlike regular pH paper, the pHion Diagnostic pH Test Strips' dual pad indicator is super easy to read.
  • Versatile. pHion Diagnostic pH Test Strips can test both urine and saliva to give you the most complete picture of your pH.
  • Economical. pHion Diagnostic pH Test Strips are more accurate, more versatile, and easier to read than litmus paper, yet theyre surprisingly....
Check Stock

LZLRUN K+CAN K+DCAN Car Diagnostic Tool Cable OBD USB Interface with Switch for BMW with FT232RL NCS Coding Winkfp Tool32 Programing

  • Our diagnostic cable is the GREEN PCB board, Our diagnostic cable with Switch, so now it can support more cars easier.
  • Interface USB OBD2 for BMW - Ediabas - K+DCAN allows full diagnostic for BMW from 1998 to 2019 (all functions as in OMNITEC interface). Build in 2 lines K and D-Can magisterial.
  • In FT232RL chip, quick connect and response.Note:Because this product is a technical automotive diagnostic products, if not familiar with the diagnostic technology, please buy carefully, thank you.
  • Works flawlessly with N54, N55, N55E, S55, B58, and N13 for MHD Flasher with Android device. You may need a USB C adapter.
  • Your fantastic OBD2 diagnostic DIY tool, to same your time and money, enjoy your DIY diagnose.
Check Stock

Diagnostic Cable Car Diagnostic Scanner Tool Kit Test Line Fingerprint Cover Compatible VAG409.1 USB

  • 【Application】The software supporting VAG-COM 409.1 or earlier, this software program turns your PC into advanced software fit for Audi & fit for....
  • 【High Quality】The car diagnostic test line has high quality precision molded diagnostic connector， it is fit for Audi and fit for Volkswagen all....
  • 【Features】The car diagnostic detection line has built-in electronic protection prevents radio problems, and LED lights show cable communication....
  • 【Brand New】100% brand new high quality diagnostic cable, strictly full tested to ensure the best quality before shipment, safe to use..
  • 【Practical】The OBD2 diagnostic test line cost very little money to buy the cable and then download the VAG-COM software to use..
Check Stock