Best Diagonal Mirror For Telescope
SVBONY SV138 Diagonal Mirror 1.25 inch 45 degree Correct Image Prism Diagonal Mirror Fully Metal for Refractor Astronomy Telescope with Dust Cover
- SV138 Diagonal Mirror fits for 1.25inch telescope eyepiece and focuser.
- Correct upside down and left-right reversed image easily.
- Even if you want to observe wildlife or other scenery during the day.
- SV138 diagonal mirror can also easily provide you with the right image.
- aluminum alloy housing and stainless steel cover.
- Extend SV138 diagonal mirror’ life and make it more durable without worrying about damage during use.
- Provides a uniform pressure-receiving area when holding the eyepiece.
- it does not damage your expensive eyepieces.
- The SV138 45-deg correct-image diagonal requires 5/8" more focus travel than typical diagonals.
- Not recommended for use in Newtonian reflector or Dobsonian reflector telescopes.
Check StockCelestron 2-Inch XLT Diagonal Mirror (for SCT Telescope) & 18778 AC Adapter (Black)
- Product 1: 2” SCT mirror diagonal with high performance XLT coatings.
- Product 1: 1/10th wave mirror is tested with an interferometer to ensure quality.
- Product 1: Housing is precision machined to achieve and hold good optical alignment..
- Product 1: Includes a 2” to 1.25” adapter and aluminum carry case.
- Product 2: Power your Celestron computerized telescope from any AC wall outlet.
- Product 2: Suitable for indoor or outdoor outlets.
Check StockStar Diagonal Telescope Diagonals 1.25 inch, 90 Degree Mirror Diagonal Erecting Image Prism Optic Telescope Accessory with Dust Cover
- Standard 1.25 inch diameter, right fit for focuser , work with refractor and catadioptric telescopes.
- The lens come with lens cover, keep your lens clean for superior image fidelity.
- Wide 90 degree angle, you can view correct image from refractor telescope stand and just look down with a comfortable angle.
- 1.25inch 90 degree diagonal mirror using with refrator telescope and makes the image upright though left and right reversed, does not affect astronomical observation.
- This star diagonal with special anti-slip rubber protoction design can prevent from scratches.
Check StockAlstar 1.25\ 45-Degree Diagonal Prism Optical Prism Inside Rather Than a Mirror which Makes Your Image Clear and Sharp
- High quality optical Prism inside rather than a mirror which makes your image clear and sharp..
- 1.25" 45-degree mirror star diagonal for any telescope with 1.25" connector (not suitable for Newtonians)..
- More comfortable viewing orientation as you observe from above, filter thread for any 1.25" filter. Accepts standard 1.25" eyepieces..
- This is a great diagonal for daytime terrestrial use and night time astronomy applications for telescopes or spotting scopes..
- Protective coating on the mirror to ensure a long life, metal barrel - for secure seating in the focuser..
Check Stockkesoto 0.965 Inch 90 Degree Correct-Image Star Telescope Diagonal/Telescope Erecting Prism with Caps
- Compatible with 0.965 inch telescope eyepieces..
- Use the 90 degree diagonal mirror with a refractor telescope, the image is upright, with left and right reversed..
- With wide 90 degree angle , it is comfortable for you to view image from refractor telescope stand..
- The fully coated lens are provided with caps to keep your lens clean and clear..
- High-quality ensures high light transmission and provides high defination images..
Check StockPrettyia 0.965 Inch/90 Degree Erecting Image Diagonal Mirror for Refractor Telescopes and Astronomical Telescope Eyepieces
- . With wide 90 degree angle , it is comfortable for you to view image from refractor telescope stand..
- . High-quality ensures high light transmission and provides high defination images..
- . Use the 90 degree diagonal mirror with a refractor telescope, the image is upright, with left and right reversed..
- . Compatible with 0.965 inch telescope eyepieces..
- . The fully coated lens are provided with caps to keep your lens clean and clear..
Check StockOrion 52055 Pentaprism 1.25-inch Telescope Diagonal Mirror, Black
- The Orion pentaprism diagonal is ideal for use with the Orion Premium linear binoviewer because the combination renders an upright non-mirror-reversed image.
- The pentaprism diagonal incorporates a pentagonal-shaped prism of BK-7 glass that is multi-coated and dielectric coated for maximum Light Transmission.
- It features a 1 25" Non-marring compression ring Collar and a tapered barrel for secure attachment to a telescope.
- With a generous clear Aperture of 29mm The pentaprism diagonal will not cause image igniting even when used with long focal length wide-field eyepieces.
Check StockAlmencla 0.965 Inch 90 Degree Enhanced Dielectric Diagonal Mirror/Erecting Image Diagonal Prism Fit for Astronomical Telescope
- High-quality prism ensures high light transmission and provides high defination images..
- The fully coated lens are provided with caps to keep your lens clean and clear..
- With wide 90 degree angle , it is comfortable for you to view image from refractor telescope stand..
- Use the 90 degree diagonal mirror with a refractor telescope, the image is upright, with left and right reversed..
- Compatible with 0.965 inch telescope eyepieces..
Check StockSVBONY 1.25 inches 90 Degree Zenith Diagonal Mirror for Refractor and Cassegrain Telescopes Astronomical Telescope
- work with refractor and catadioptric telescopes.
- keep your lens clean for superior image fidelity.
- you can view correct image from refractor telescope stand and just look down with a comfortable angle .
- 1.25" 90 degree diagonal mirror using with refrator telescope and makes the image upright.
Check StockOrion 8879 1.25-Inch Enhanced Mirror Star Telescope Diagonal
- The precision flat mirror in this 90 degrees diagonal is meticulously polished to yield excellent performance.
- Anodized aluminum housings are internally blackened for high contrast views free of glare.
- Fits 1.25" telescope focusers, accepts 1.25" eyepieces.
- Enhanced Aluminum mirror coatings yield 97% reflectivity for bright clear views.
Check StockOrion 8880 1.25-Inch Dielectric Mirror Star Diagonal
- 90 diagonal features sophisticated, lab-tested dielectric coatings that boast an astounding 99 percent reflectivity.
- Dielectric mirror coatings are more durable and more reflective than enhanced aluminum coatings.
- Diagonal provides a comfortable 90-degree viewing orientation when observing the night sky through a refractor, Maksutov-Cassegrain (Mak-Cass) or Schmidt-Cassegrain telescope.
- Machined and anodized aluminum housing features machine-threaded baffles for optimized contrast.
- 1.25" nosepiece barrel is threaded to accept like-sized Orion eyepiece filters.
Check StockOrion 10022 StarMax 90mm TableTop Maksutov-Cassegrain Telescope
- This grab-and-go TableTop Maksutov-Cassegrain telescope provides powerful views of the Moon and bright planets such as Jupiter, Saturn, and Mars.
- Weighing just 6.5 lbs. assembled, this compact telescope and base can be taken just about anywhere to provide great views of the night sky while on road-trips, camping, or the short trip out to the backyard.
- 90mm aperture Maksutov-Cassegrain telescope gathers enough light for beautiful views of brighter deep space objects like globular clusters, nebulas, and many bright galaxies.
- Nifty tabletop base provides a stable viewing foundation you can set on any sturdy table, or even attach it to a field tripod with a 3/8" or 1/4"-20 threaded post.
- Includes two 1.25" eyepieces (25mm and 10mm focal lengths), EZ Finder II reflex sight for easy aiming, 90 degree mirror diagonal for comfortable night sky viewing, and more!.
Check StockAstromania 1.25\ 90-Degree Diagonal Mirror - More Comfortable Viewing Orientation as You Observe from Above, Filter Thread for Any 1.25\ Filter and Accepts Standard 1.25\ eyepieces
- 1.25" 90-degree mirror star diagonal for any telescope with 1.25" connector (not suitable for Newtonians)..
- More comfortable viewing orientation as you observe from above, filter thread for any 1.25" filter. Accepts standard 1.25" eyepieces..
- Protective coating on the mirror to ensure a long life, metal barrel - for secure seating in the focuser..
- Useful for refractor and Cassegrain telescopes - not recommended for reflectors..
- Wide 90 degree angle: You can view correct image from refractor telescope stand and just look down with a comfortable angle..
Check Stock