Categories

Best Diamond Continuous Rim Blades

Gunpla 3 Pieces 4-1/2 inch Diamond Cutting Blade Continuous Segmented Turbo Rim Dry Wet Circular Saw Cutter Angle Grinder Disc 7/8 inch Arbor with Reducing Ring 5/8 inch for Tile Masonry

  • QUALITY MATERIAL: Gunpla diamond cutting blades are manufactured with high quality and durable heat-treated manganese steel and diamond. This angle grinding set has 3 of the most used cutting saws to make sure you are always ready for any project..
  • 3 PIECES SET: The includes 1 continuous rim for smooth cutting of marble, granite, tile & ceramics, 1 segmented rim for fast cutting for masonry, concrete, pavers, terrazzo, roof tile and 1 turbo rim diamond cutting saw blade..
  • CONVENIENT CUTTING: Fashioned to provide exceptional and efficient cutting performance, Gunpla diamond grinding saw blades ensure quick and precise cuts with clean and perfect results..
  • PERFECTLY HONED: Our cutting diamond blades perfectly sharpened to ease use and can be used several times before any new honing. They have a thinner kerf that favors increases the cutting speed and minimize dust..
  • IDEAL FEATURES: Diameter: 115mm (4.5inch).
  • Arbor size: 7/8 inch(22.2mm) with reduce ring 5/8 inch(16mm).
  • Speed max. 80m/s and can used dry or wet. Balanced plate reduces vibration for improved accuracy and better finish..
Check Stock

T TOVIA 5 inch Diamond Wet Tile Blade For Angle Grinder Hot Pressed Ceramic Cutting Disc For Porcelain Tiles and Ceramic 7/8 or 20mm Arbor 10mm Cutter Head Wet Cutting

  • Continuous rim diamond blade, designed to cut porcelain, tile and ceramics. Wet cutting with water, continuous cutting edge, fast and neat cutting....
  • Hot pressed wet cutting diamond blade head is made of high quality diamond particles in optimized order of arrangement, hard and sharp, effectively....
  • Diamond blade head height 10mm, wider than some ordinary saw blades. It is more wear-resistant and sharp when cutting hard tile material, and can....
  • The angle grinder blade is designed with circular holes at the edge. Which can effectively improve the blade's ability to dissipate heat, conduct....
  • This diamond wet blade is designed for cutting tiles and ceramics. It is 30% longer life and sharper than ordinary diamond blades and is more cost....
Check Stock

IRWIN 10-Inch Circular Saw Blade, Fiber Cement PCD, 6-Tooth (4935624)

  • Polycrystalline diamond-tipped teeth will last up to 15X longer than standard carbide fiber cement blades..
  • Thin kerf blade produces less dust than continuous rim blades..
  • Ground and hardened plate body provides smooth and accurate cuts..
Check Stock

DEWALT 4-3/8-Inch Tile Blade, Wet/Dry (DW4738)

  • Extended performance diamond matrix provides long life and enhanced material cutting for the dry/wet saw blades.
  • Continuous rim design of the tile saw blade provides chip free cutting in all types of tile.
  • XP2 and XP4 blades designed specifically for high power tile saws, allowing quick, free, low heat, and straight cutting.
  • XP2 and XP3 blades with laser cut expansion slots eliminate blade warping due to heat build-up.
  • Premium XP2 and XP4 cutting matrix means XP2 gives 2 x's the life of standard blades, XP4 gives 4x's the life of standard blades.
Check Stock

IVY Classic 38184 Diamond Plus 6-Inch Wet Tile Cutting Continuous Rim Diamond Blade with 5/8-Inch Arbor, 1/Card

  • Designed for precise, smooth cutting of ceramic, marble, slate and granite tile.
  • Diamond Plus Blades - a highly reliable blade at a lower price for small to medium cutting jobs.
  • State of the art automated manufacturing technology.
  • Arbor: 5/8-inch, Rim Width: 2.2mm, Rim Height: 5.5mm, Max RPM: 10,000.
Check Stock

Delta Diamond Piranha Premium 4-1/2-Inch Tile Diamond Blade 7/8 -5/8 Arbor Dry/Wet Cutting Porcelain Tile Ceramic Tile Stone 4.5-Inch

  • PREMIUM DIAMOND CONCENTRATION - Higher levels of diamond concentration provide excellent cutting for a wide range of materials including porcelain....
  • MINIMAL CHIPPING - Thin .060 cutting rim allows for the best combination of cutting speed and blade life, with minimum chipping and a first-class cut!.
  • PRECISE CUTTING - The blade core is made from heat-treated hi-speed steel to withstand the demands of dry cutting as well as long continuous cuts..
  • SPECIFICATIONS - 4-1/2" diameter X .060 wide X 7/8" arbor with 5/8" bushing. 8mm rim height. Will fit just about any hand-held disc grinder. The....
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a....
Check Stock

Delta Diamond Piranha Premium 7 Inch Tile Diamond Saw Blade, Continuous Rim, DM-7/8\-5/8\ Arbor, Dry or Wet Cutting Porcelain & Ceramic Tiles (7\)

  • PREMIUM TILE DIAMOND BLADE - Made with higher levels of diamond compared to other diamond blades for professional use. Engineered to provide smooth finishes on porcelain, ceramic, marble, granite, and similar materials..
  • CHIP-FREE CUTTING - Continuous rim design formulated with high-grade diamonds allows for smooth chip-free cutting..
  • PROFESSIONAL-GRADE QUALITY - Piranha blades are ideal for professionals who need reliable cutting for every job while still being a great value..
  • SPECIFICATIONS - 7" diameter X .060 wide X DM-7/8" arbor. Includes preinstalled 5/8" bushing. Will fit just about any hand-held angle grinder, circular saw, tile saw or trim saw. Max safe rpm is 8,730. Wet or dry cutting. If blade becomes dull, we recommend running the blade through a dressing stone or paver to expose new diamonds..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool will be replaced free....
Check Stock

DEWALT DW4766 7-Inch by .060-Inch Porclean Tile Blade Wet

  • Extended performance diamond matrix provides long life and enhanced material cutting.
  • Continuous rim design provides chip free cutting in all types of tile.
  • XP2 and XP4 blades designed specifically for high power tile saws, allowing quick, free, low heat, and straight cutting.
  • XP2 and XP3 blades with laser cut expansion slots eliminate blade warping due to heat build-up.
  • Premium XP2 and XP4 cutting matrix means XP2 gives 2 x's the life of standard blades, XP4 gives 4x's the life of standard blades.
Check Stock

Makita 2 Piece - 4.5” Turbo & Segmented Diamond Blade Set For 4.5”+ Grinders & Circular Saws - Ultra-Fast & Lasting Cutting For Concrete, Masonry & Brick - 5/8”, 20mm & 7/8” Arbors

  • ... Premium Bond that provide the optimal cut-to-wear ratio, optimized for balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup, allowing you to cut longer, consistently precise with moderate power demands with the lowest heat buildup in the industry.
  • ✅ 1 SEGMENTED Steel disc is ideal for safe and continuous use with minimal warpage risk due to its advanced air flow cooling technology | RELIABLY & EFFORTLESSLY CUT through All Concrete, including general cured concrete, reinforced concrete, block & brick cutting in Wet or Dry conditions over an extra-long life span due to Makita’s Premium High Quality Industrial Diamonds, and Makita’s proprietary industry leading bond matrix that allows for optimal diamond exposure-to-bond wear ratio.
  • ✅ 1 TURBO Steel disc is ideal for quicker and faster cuts in Concrete & Masonry | AVOID BLADEWEAR & Slow Downs with lower priced blades by relying on Makita’s proprietary matrix bond, allowing for fast, accurate and continuous cutting PERFORMANCE, PRECISION, LONGEVITY, STABILITY & INTEGRITY, cutting Longer, Faster and Reliably than other blades that may warp or prematurely wear.
  • ✅ DESIGNED for Hard and Continuous use by professionals in construction, concrete fabrication, general maintenance, br....
Check Stock

Bosch DBX4543S Diamond Blade Continuous,4-1/2 In.

  • Diamond blades with the X-LOCK mount design – offer a faster, fixed mount and high-quality materials.
  • X-LOCK wheel change – features snap-on mounting and a wheel-release lever on grinder for change-out up to five times faster.
  • Tool-free disc swap – the wheel mounts properly without the need for a spanner wrench or flange nuts for no losable parts.
  • Continuous rim diamond blade – designed for fast, clean cuts in most common ceramic and stone tile materials.
  • Fast cutting – quality diamonds embedded in an optimized pattern to help ensure that the diamonds are effectively engaged in cutting the material.
Check Stock

Bosch DBX543S 5 In. X-LOCK Continuous Rim Diamond Blade

  • Diamond blades with the X-LOCK mount design – offer a faster, fixed mount and high-quality materials.
  • X-LOCK wheel change – features snap-on mounting and a wheel-release lever on grinder for change-out up to five times faster.
  • Tool-free disc swap – the wheel mounts properly without the need for a spanner wrench or flange nuts for no losable parts.
  • Continuous rim diamond blade – designed for fast, clean cuts in most common ceramic and stone tile materials.
  • Fast cutting – quality diamonds embedded in an optimized pattern to help ensure that the diamonds are effectively engaged in cutting the material.
Check Stock

(3 Pack, 4 1/2 inches) GRAFF Diamond Blade for Angle Grinder - Diamond Cutting Wheel for Dry and Wet Cutting Stone, Marble, Granite, Brick, Masonry, Paving Flag, Concrete, Ceramic & Kerb

  • ✔︎ CONTINUOUS RIM BLADE has a high content of soldered diamond segment that makes its ideal for cutting ceramic & ceramic tile..
  • ✔︎ TURBO BLADE - diamond blade for cutting most materials including concrete, tile, stone, ceramic, paving flag, marble, granite, brick, masonry & curb..
  • ✔︎ SEGMENTED BLADE – diamond blade has teeth with diamond segments that allow cutting stone, marble, granite, brick, masonry & paving flag..
  • ✔︎ Our blades are suitable for DRY & WET CUTTING and can SELF-SHARPEN by erasing diamond grits during operation(2 or 3 cuts on silicon/abrasive stone)..
  • ✔︎ SPECIFICATIONS: Diameter: 4 ½ Inch (115 mm), Arbor: 7/8 Inch with 5/8 Inch adapter, Cutting width: 2 mm/2.5 mm/2mm, Segment height: 10 mm/10mm/7mm..
Check Stock

Delta Diamond Piranha Premium 10 Inch Tile Saw Diamond Blade, 5/8\ Arbor, Continuous Rim, Wet Cutting Porcelain Tile, Ceramic Tile, Stone (10\)

  • PREMIUM TILE SAW BLADE - Made with higher levels of diamond compared to standard blades to provide excellent cutting and performance on a wide range of materials. Use on porcelain tile, ceramic tile, granite, marble, slate, terrazzo, or any similar material..
  • MINIMAL CHIPPING - Thin .090 cutting rim allows for the best combination of cutting speed and blade life while producing a first-class cut!.
  • EXTRA TALL RIM - 11MM tall to maximize blade life and prevent downtime during blade changes..
  • SPECIFICATIONS - 10" diameter X .090 wide X 5/8" arbor. Will fit any tile saw with 5/8" arbor shaft. Max safe rpm is 6,115..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool will be replaced free of charge..
Check Stock