Categories

Best Diamond Grit Hole Saws

Diamond Drill Bit Glass Drill bit for Tile Marble Granite Fiberglass Ceramic Tool Drill Bit Set 5 Pack | 5/32” – ½”

  • Glass drill bit Perfect set for cutting accurate holes in a wide variety of materials such as glass and ceramics.
  • Nickel plating on these bits maximizes your tool’s life with great resistance to corrosion.
  • Diamond Drill Bit coating maximizes performance and retains a sharper cutting edge than traditional carbide or bimetal hole saws.
  • Diamond grit hole saw drill bit side holes allow for easy slug removal after drilling.
  • Sizes include: 5/32”, ¼”, 5/16”, 3/8”, and ½” with a cutting depth of ¾”and ¼” shank.
Check Stock

6 Inch Carbide Hole Saw Bit Concrete Hole Saw 152mm Carbide Hole Cutter Drill Stucco Brick Fiberglass Reinforced Plaster And Ceramic Tile Saw Through Cement Block and Drywall For Recessed Lighting

  • 152mm 6" CARBIDE GRIT HOLE SAW For Drilling Holes In Tough To Drill Materials, Regular Toothed Hole Drill Bit Would Go Dull If Used As A Drywall Hole Saw But With Carbide Tipped Tool Bits They Are Tougher And No Teeth To Snag And Go Dull..
  • TUNGSTEN CARBIDE GRIT Hole Saws Are Professional Tools Construction Tools Electrician Tools And Plumbing Tools Whether It Be For Diy Home Improvement Or Remodelling. Drill Holes Through Brick Walls To Run Conduit For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fib....
Check Stock

4 Inch Carbide Hole Saw Bit Concrete Hole Saw for Dryer Vent and Drywall for Recessed Lighting 102mm Carbide Hole Cutter for Stucco Brick Fiberglass Reinforced Plaster Ceramic Tile and Cement blocks

  • 102mm 4" CARBIDE GRIT HOLE SAW For Drilling Holes In Tough To Drill Materials, Regular Toothed Hole Drill Bit Would Go Dull If Used As A Drywall Hole Saw But With Carbide Tipped Tool Bits They Are Tougher And No Teeth To Snag And Go Dull..
  • TUNGSTEN CARBIDE GRIT Hole Saws Are Professional Tools Construction Tools Electrician Tools And Plumbing Tools Whether It Be For Diy Home Improvement Or Remodelling. Drill Holes Through Brick Walls To Run Conduit For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fib....
Check Stock

Delta Diamond Cougar HS 14 Inch Segmented Diamond Saw Blade, Premium, General Purpose Cutting of Concrete, Masonry, Pavers, Stone, .125 X 1\-20mm Arbor (14\)

  • GENERAL PURPOSE - Cougar HS diamond saw blades are for general purpose cutting of soft to medium aggregate cured concrete, masonry, concrete or clay pavers, various types of stone and all similar materials. Not recommended for reinforced concrete with rebar, green concrete, or asphalt applications. View our other blades by Delta Diamond like the Cougar HD, Cougar S or the Kick-Asphalt Diamond Blade instead..
  • 12MM SEGMENTS - Premium grade 12MM tall diamond segments are designed for long cutting life with fast, smooth cutting in a wide range of materials..
  • WET OR DRY CUTTING - The center core is made from a tensioned, heat-treated hi-speed steel and is guaranteed to withstand the demands of dry cutting..
  • SPECIFICATIONS - 14" diameter X .125 (1/8") thick and has a 1" arbor hole with 3/8" drive pin hole and 20mm bushing. Max 5,460 rpm. For use with hand-held power saws, 5-20 hp concrete saws, or masonry saws..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking, and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the d....
Check Stock

Delta Diamond Cougar HS 12 Inch Segmented Diamond Saw Blade Premium General Purpose Cutting of Concrete Masonry Pavers Stone .125 X 1 -20mm Arbor 12

  • GENERAL PURPOSE - Cougar HS diamond saw blades are for general purpose cutting of soft to medium aggregate cured concrete, masonry, concrete or clay pavers, various types of stone and all similar materials. Not recommended for reinforced concrete with rebar, green concrete, or asphalt applications. View our other blades by Delta Diamond like the Cougar HD, Cougar S or the Kick-Asphalt Diamond Blade instead..
  • 12MM SEGMENTS - Premium grade 12MM tall diamond segments are designed for long cutting life with fast, smooth cutting in a wide range of materials..
  • WET OR DRY CUTTING - The center core is made from a tensioned, heat-treated hi-speed steel and is guaranteed to withstand the demands of dry cutting..
  • SPECIFICATIONS - 12" diameter X .125 (1/8") thick and has a 1" arbor hole with 3/8" drive pin hole and 20mm bushing. Max 6,300 rpm. For use with hand-held power saws, 5-20 hp concrete saws, or masonry saws..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking, and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between t....
Check Stock

Delta Diamond Brick Boss 14 Inch Diamond Blade, 1\-20MM Arbor, Wet/Dry Cutting Brick, Pavers, Stone (14\)

  • BRICK CUTTING - Use Brick Boss diamond blades for cutting brick (up to 5,000 psi), most types of stone such as granite and quartzite and similar materials. Not intended for use on materials such as concrete, asphalt, concrete block or sandstone..
  • EXTRA WIDE U SHAPED SLOTS - Features 10MM tall diamond segments with deep and wide U shaped slots. The wide slots allow for better cooling and faster removal of the cutting debris, thereby increasing cutting speed..
  • HEAT TREATED HIGH-SPEED STEEL - The core is made from heat-treated high-speed steel and is guaranteed to withstand the demands of dry cutting..
  • SPECIFICATIONS - Blade measures 14" diameter X .125 (1/8") thick with a 1" arbor hole and 20mm bushing for Stihl power saws. It can be used on masonry saws, hand-held power saws and bridge saws. Operating RPM is 2,500. Max. safe RPM is 5,460..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the d....
Check Stock

EZARC 4.5 inch Diamond Blade, Turbo Diamond Saw Blades for Angle Grinder, 4.5" Stone Blade for Fast Cutting Porcelain Ceramic Granite Marble Brick(2-Pack)

  • 【Stone Cutting Master】EZARC Diamond Blade offers excellent performance and efficiency when it comes to cutting through masonry materials such as ceramic, granite, marble, concrete and brick..
  • 【Turbo Segments】The turbo design reduces debris and provides a smoother, cleaner cut, resulting in a more professional surface finish. By minimizing vibrations during the cutting process, it enhances user comfort and control, making the overall experience more enjoyable and precise..
  • 【Diamond Grit】The strategic positioning of turbo segments in our diamond blade ensures optimal cooling, preventing overheating and extending its lifespan. With premium HRC90+ diamond grit and a special dimensional arrangement, this versatile diamond masonry blade offers maximum cutting life for heavy-duty demands..
  • 【Compatibility】EZARC 4-1/2 inch diamond cutting wheel is suitable for most tile saws, hand-held angle grinders and wet saws with a 7/8" Arbor (includes a adaptor for 5/8" arbor). Disc Size: 4.5 Inch.
Check Stock

Delta Diamond Cougar HS 14 Inch 3-Pack Segmented Diamond Saw Blade, Premium, General Purpose Cutting of Concrete, Masonry, Pavers, Stone, .125 X 1\-20mm Arbor (14\ 3pcs)

  • GENERAL PURPOSE - Cougar HS diamond saw blades are for general purpose cutting of soft to medium aggregate cured concrete, masonry, concrete or clay pavers, various types of stone and all similar materials. Not recommended for reinforced concrete with rebar, green concrete, or asphalt applications. View our other blades by Delta Diamond like the Cougar HD, Cougar S or the Kick-Asphalt Diamond Blade instead..
  • 12MM SEGMENTS - Premium grade 12MM tall diamond segments are designed for long cutting life with fast, smooth cutting in a wide range of materials..
  • WET OR DRY CUTTING - The center core is made from a tensioned, heat-treated hi-speed steel and is guaranteed to withstand the demands of dry cutting..
  • SPECIFICATIONS - 3 Pack of 14" diameter X .125 (1/8") thick and has a 1" arbor hole with 3/8" drive pin hole and 20mm bushing. Max 5,460 rpm. For use with hand-held power saws, 5-20 hp concrete saws, or masonry saws..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking, and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond bet....
Check Stock

Delta Diamond Mad Dog HS 12 Inch Segmented Diamond Saw Blade, .125 X 1\-20mm Arbor, Made in USA, Premium, Wet/Dry, Laser-Welded, General Purpose Cutting Concrete, Masonry, Stone (12\)

  • PREMIUM LASER-WELDED SEGMENTS - Premium, long lasting, and durable diamond segments are laser-welded for added strength..
  • WET OR DRY - Use dry or wet on cured concrete, masonry, brick, block, roofing tile, stone, pavers, slate, terrazzo, and similar materials..
  • HEAVY DUTY GENERAL PURPOSE - Great for harder materials or when you want a blade that lasts. Mad Dog HS Premium blades last longer and cut faster than standard blades..
  • SPECIFICATIONS - Made in USA. 12" diameter X .125 thick with a 1" arbor fits most masonry saws and hand-held saws. Preinstalled 20mm bushing for adapting to other power saws. Drive pin hole for walk-behind / self-propelled saws from 8-24hp. The maximum safe operating speed is 6,300 RPM..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool will be replaced free of charge..
Check Stock

Delta Diamond Mad Dog HS 14 Inch Segmented Diamond Saw Blade, .125 X 1\-20mm Arbor, Made in USA, Premium, Wet/Dry, Laser-Welded, General Purpose Cutting Concrete, Masonry, Stone (14\)

  • PREMIUM LASER-WELDED SEGMENTS - Premium, long lasting, and durable diamond segments are laser-welded for added strength..
  • WET OR DRY - Use dry or wet on cured concrete, masonry, brick, block, roofing tile, stone, pavers, slate, terrazzo, and similar materials..
  • HEAVY DUTY GENERAL PURPOSE - Great for harder materials or when you want a blade that lasts. Mad Dog HS Premium blades last longer and cut faster than standard blades..
  • SPECIFICATIONS - Made in USA. 14" diameter X .125 thick with a 1" arbor fits most masonry saws and hand-held saws. Preinstalled 20mm bushing for adapting to other power saws. Drive pin hole for walk-behind / self-propelled saws from 8-24hp. The maximum safe operating speed is 5,460 RPM..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool will be replaced free of charge..
Check Stock

JINGLING NO Center Hole 8\ inch Diamond Grinding Disc 180 Grit Flat Lap Disk Lapidary Tools for Stone

  • Product Name: 8 inch Diamond Grinding Wheel, No Hole Flat Lap Disk, Diamond Lapidary Discs.
  • Arbor hole: No Center Hole,the surface is completed filled with diamond, only one side is coated diamond.
  • The diamond discs are one of the finest discs manufactured for hobby, lapidary, glass applications.
  • Absolutely flat and parallel to meet the most exacting faceting requirements.
Check Stock

(10 Pack) 14 inch Dry or Wet Cutting General Purpose Segmented High Speed Diamond Saw Blades for Concrete Stone Brick Masonry (14\ - 10 pcs)

  • SPECIFICATIONS - 10 Pack of 14" diameter X .125 (1/8") thick with a standard 1" arbor hole fits most hand-held machines and masonry saws. Included is a 20mm bushing for and a drive pin hole for adapting to 8-24hp walk-behind saws. Max. 5,460 rpm. Made from a balanaced, heat-treated, high-speed steel core and is guaranteed to withstand the demands of dry cutting. Contains 10 blades in package..
  • Can be used wet or dry. For light or medium duty cutters..
  • Used on handheld high speed saws and low horsepower walkbehind saws (up to 13 hp).
  • PREMIUM DIAMOND BOND MATRIX - Allows for faster, longer lasting, and smoother cutting diamond blade resulting in better performance with less stress on the operator and machine..
Check Stock

Utoolmart 95mm Diamond Grit Hole Saw Drill Bit for Glass Ceramics Porcelain Ceramic Tile 1Pcs

  • 【Material】- The hole saws are made of diamond and high carbon steel, offering a combination of hardness and toughness for wear resistance..
  • 【Efficiency】- Small incision resistance,feature drilling stably, fast speed, not breaking the border Opening neat, smooth, no broken edges, no....
  • 【Advantage】- Side holes allow for easy slug removal after drilling. Perfect for cutting accurate holes in a wide variety of materials such as....
  • 【Feature】Diamond coating maximizes performance and retains a sharper cutting edge than traditional carbide or bimetal hole saws..
  • 【Wide Application】- Diamond hole saw drill bit can be used with a standard electric drill Cut perfect circles with these tools, Suitable for....
Check Stock