Categories

Best Diamond Hole

JINGLING 175mm 7' inch Diamond Hole Saw Coated Tile Drill Bits for Glass Stone

  • The diamond coated hole saw suitable for use in drill hole on glass, marble, tile or granite.
  • Use with water as a lubricant, holes require No futher work as cutting is clean.
  • Start drill at 45 degree to surface and align to 90 degree as hole forms.
  • Product Name: diamond hole saw, diamond drill bit for tile, hole saw ceramic tile.
Check Stock

JINGLING 100mm 4\ inch Tile Diamond Hole Saw Drill Bits for Glass Stone Ceramic

  • The diamond coated hole saw suitable for use in drill hole on glass, marble, tile or granite.
  • Use with water as a lubricant, holes require No futher work as cutting is clean.
  • Start drill at 45 degree to surface and align to 90 degree as hole forms.
  • Product Name: diamond hole saw, diamond drill bit for tile, hole saw ceramic tile.
Check Stock

JINGLING 63mm 2-1/2\ inch Diamond Drill Bit Tile Hole Saw for Glass Ceramic Stone

  • Product Name: diamond hole saw, diamond drill bit for tile, hole saw ceramic tile.
  • The diamond coated hole saw suitable for use in drill hole on glass, marble, tile or granite.
  • Use with water as a lubricant, holes require No futher work as cutting is clean.
  • Start drill at 45 degree to surface and align to 90 degree as hole forms.
Check Stock

Diamond Drill Bit Tile Hole Saw Set, 16 PCS Hole Core Drill Hole Saw Kit with Adjustable Hole Saw Guide Jig Fixture and Ultimate Triangle Drill Bits Set for Tile, Ceramic, Glass, Porcelain, Marble

  • Diamond Drill Bit Set Various Sizes - Set include 10 holes saw drill bits+1 hole saw guide clamp+1 screwdriver driver + 4 triangle bit. 10 Sizes Diamond hole saw : 6mm, 8mm, 10mm, 12mm, 20mm, 25mm, 30mm, 35mm, 40mm, 50mm,made of high-strength carbon steel, the integrated steel structure makes these diamond drill bits more durable. Diameter of triangle bit: 6mm, 8mm, 10mm, 12mm..
  • Rustless & Durable: This diamond drill bits are made of high strength Carbon Steel with smooth nickel plating surface. Each diamond hole saw was coated with high quality Diamond to enhance the drilling speed and creates a sharp, high precision and smooth cut with no broken edges In Seconds. Reduced drill speeds, low drill pressure and increased use of water lubrication will extend drill bit life considerably..
  • Adjustable Fixture - Adjustable hole saw drilling guide fixture with suction cup-the maximum opening length of the board is 3-1 / 4 ", which is large enough to fit in all size hole saws. Movable ball bearings, two modes (fixing 3 or 4 bearings) are your choice, just flip the board..
  • The large clearance holes along the drill bit help the entry of cooling water and the escape of chips and other particles from the borehole, ensuring smooth punching and making the drilling pro....
Check Stock

JINGLING NO Center Hole 8\ inch Diamond Grinding Disc 180 Grit Flat Lap Disk Lapidary Tools for Stone

  • Product Name: 8 inch Diamond Grinding Wheel, No Hole Flat Lap Disk, Diamond Lapidary Discs.
  • Arbor hole: No Center Hole,the surface is completed filled with diamond, only one side is coated diamond.
  • The diamond discs are one of the finest discs manufactured for hobby, lapidary, glass applications.
  • Absolutely flat and parallel to meet the most exacting faceting requirements.
Check Stock

Hole Saw Sets 6PCS Diamond Hole Saw Bit, Angle Grinder Brazed Hole Opener for Marble Glass Tile M14 Female Thread for Glass,

  • 6PCS IN 1 SET: Hole Saw Bit Includes 6pcs brazed diamond drill bits, with different hole diameters, which can meet more different drilling needs..
  • GOOD PERFORMANCE: These hole openers have neat and smooth holes, no broken edges, no need to add water when using, incisive and wear resistant..
  • DURABLE DIAMOND: Diamond Drill Bit Set Hole Use excellent natural diamond powder, thicken the emery coating, greatly improve the wear resistance of the hole opener..
  • HIGH EFFICIENCY: M14 screw design, with non slip handle and large torsion, high bearing capacity, efficient and labor saving in drilling operation..
  • APPLICABLE SCENES: These angle grinder hole saws are suitable for cutting holes in marble, glass, tile, granite, etc. has wide range of applications..
Check Stock

Diamond Tile Drill Bits Ceramic Diamond Glass Drill Bit Set 5 Pack 2 Carbide Drill Bits Ceramic Tile Drill Bits 3 Porcelain Granite Drill Bits and Drill Guide for Diamond Tip Drill Bit for Bottles

  • Tungsten Carbide Drill Bit For Ceramic Tile Bits For Drill Holes In Clay Plant Pots For Drainage 3/16″ And 1/4″ Ceramic Drill Bits For Tile . Tungsten Carbide Drill Bits have Self Centering Point for Drilling Holes in Ceramic Tile Marble Travertine and Slate..
  • Diamond Drill Bits For Glass 3/16 In 1/4″ In 1/2 Inch Drill Bit For Glass Drill Set. glass Drill Bit For Bottles Half Inch Glass Drill Bit With Guide For Drilling Hole In Glass Bottles And Glass Blocks For Tree Lights. Keep These Glass Hole Saw Drill Bit For Drilling Glass Cool With Water For Extended Life..
  • For Best Results Use The Diamond Drill Bit For Porcelain And The Spear Point Ceramic Tile Bit To Drill Tile. Use Diamond Bit To Drill Glass And Carbide Tipped Drill Bits With Any Battery or Electric Drill Hole Cutter Bits Must Be Used Wet. Carbide Ceramic Tile Drill Bit Set Can Be Used Dry If No Heat Builds Up..
  • Whilst The Tungsten Tile Cutting Drill Bits Can Be Used As Porcelain Tile Drill Bit The Diamond Tile Drill Bit Will Drill Holes In Porcelain Tile Faster And Last Longer As Long As Diamond Cutting Tip Is Kept Cool. Remove Diamond Tipped Drill Bit From Tile Hole Every 10 To 15 Seconds And Dip Diamond Porcelain Drill Bit Into Cup Of Water, Also Spray Water Into Ceramic Tile Hole To ....
Check Stock

2 1/4\ Diamond Hole Saw for Shower Diverter Valve 2 1/4\ Waste Pipe Hole Saw Guide Holds in Place Large Diamond Particle Professional Diamond Hole Saw for Porcelain Tile Ceramic Tile Glass Tile 57mm

  • 2 1/4" Diamond Hole Saw 57mm PROFESSIONAL QUALITY DIAMOND Drill Bit Bigger Diamond Grit Pieces Cut Better Keep Cool.
  • DIAMOND DRILL CORE GUIDE INC. Just Tape Hold In Place No More Fingers Crossed It Doesnt Move Or Jump.
  • DIAMOND HOLE SAW BITS Cut Porcelain Granite Countertops Ceramic Glass Tile Blocks And Wine Bottles.
  • DIAMOND CORE BITS FIT ANY STANDARD DRILL CHUCK Using Hammer Drill Or Not Keeping Cool Will Wear Fast.
  • TRADE SECRET Remove From Hole Every 15 Secs Dip In Water Get Water In Hole Will Stop Material Crack.
Check Stock

1 1/8\ Diamond Hole Saw For Faucet Sink Hole Guide Holds Holesaw In Place When Drilling, High Quality Multi Use Diamond Grit Hole Saw For Porcelain Granite Ceramic Glass Tile Glass Bottles Blocks 29mm

  • 1 1/8" Diamond Hole Saw 29mm PROFESSIONAL QUALITY DIAMOND Drill Bit Bigger Diamond Grit Pieces Cut Better Keep Cool.
  • DIAMOND DRILL CORE GUIDE INC. Just Tape Hold In Place No More Fingers Crossed It Doesnt Move Or Jump.
  • DIAMOND HOLE SAW BITS Cut Porcelain Granite Countertops Ceramic Glass Tile Blocks And Wine Bottles.
  • DIAMOND CORE BITS FIT ANY STANDARD DRILL CHUCK Using Hammer Drill Or Not Keeping Cool Will Wear Fast.
  • TRADE SECRET Remove From Hole Every 15 Secs Dip In Water Get Water In Hole Will Stop Material Crack.
Check Stock

7/8 in Diamond Hole Saw 7/8 inch for Porcelain Tile Drill Bit Glass Drill Bit Diamond Tip Bit with Core Guide to Hold in Place and Prevent Jumping 5mm Porcelain Drill Bit for Ceramic Tile 22mm

  • 7/8" Diamond Hole Saw 22mm PROFESSIONAL QUALITY DIAMOND Drill Bit Bigger Diamond Grit Pieces Cut Better Keep Cool.
  • DIAMOND DRILL CORE GUIDE INC. Just Tape Hold In Place No More Fingers Crossed It Doesnt Move Or Jump.
  • DIAMOND HOLE SAW BITS Cut Porcelain Granite Countertops Ceramic Glass Tile Blocks And Wine Bottles.
  • DIAMOND CORE BITS FIT ANY STANDARD DRILL CHUCK Using Hammer Drill Or Not Keeping Cool Will Wear Fast.
  • TRADE SECRET Remove From Hole Every 15 Secs Dip In Water Get Water In Hole Will Stop Material Crack.
Check Stock

Meccion Diamond Drill Bit Brazed Core Hole Saws Performance Hollow Hole Cutter for Glass/Tile/Granite/Marble/Porcelain 6mm-50mm 11pcs Set

  • Professional Diamond Hole Cutter: With Special design of diamond brazed For porcelain, glass, marble, ceramic, rock and granite etc..
  • High Quality Hole Drilling: Made from carbon steel with diamond blade ideal for drilling clean and accurate holes and cut a perfect circles with these tools.
  • Longer Service Life: Heavy duty hole saws gives superior performance, Durability is more than 8X.
  • Tips: Electroplated diamond coating will wear off if the tool gets too hot. Never let your drill bit run dry..
  • Package Include: 6mm (15/64"), 8mm (5/16"), 10mm (25/64"), 12mm (15/32"), 16mm (5/8"), 20mm (25/32"), 22mm (3/4"), 25mm (31/32"), 30mm (1-3/16"), 38mm(1-1/2"), 50mm (1-31/32") diamond hole saw drill bit set of 11 pack.
Check Stock

JINGLING 2.5mm 3/32\ inch Diamond Small Drill Bit Hole Saw Masonry Tools for Glass Tile Stone Pack of 20Pcs

  • The diamond coated hole saw suitable for use in drill hole on glass, marble, tile or granite.
  • Use with water as a lubricant, holes require No futher work as cutting is clean.
  • Start drill at 45 degree to surface and align to 90 degree as hole forms.
  • Product Name: diamond hole saw, diamond drill bit for tile, hole saw ceramic tile.
Check Stock

Rokrou Diamond Drill Bits Diamond Brazed Hole Saw Kit 10PCS Tile Drill Bit with Hole Saw Guide from 6 -50mm /1/4\-2\ for Tile, Drill, Glass, Marble, Granite …

  • 【10 ᴛɪᴍᴇs ʟᴏɴɢᴇʀ ʟɪғᴇ ᴛɪᴍᴇ】Processed with brazing technology, premium level super fine diamond sand is attached to the coated steel body. Our Brazed Hole Saw can last 10 times longer than an ordinary hole saw..
  • 【ᴍᴜʟᴛɪᴘʟᴇ sɪᴢᴇs】The diamond hole saw contains ten different sizes, including 6mm/0.24" 8mm/0.31" 10mm/0.39" 14mm/0.55" 18mm/0.71" 22mm/0.87" 25mm/1" 32mm/1.26" 40mm/1.57" 50mm/1.97"..
  • 【ғᴀsᴛᴇʀ ᴅʀɪʟʟɪɴɢ ᴡɪᴛʜ ʙᴇᴛᴛᴇʀ ᴅʀɪʟʟ】Compared to the ordinary material hole saw, our drill with fine diamond sand can drill holes on hard materials such as tile, drill, glass, marble, granite, much faster..
  • 【ᴅʀɪʟʟ ɢᴜɪᴅᴇ】No need to worry about scratching your tile when drilling the hole. Our Adjustable hole saw drilling guide with a suction cup and 4 bearings will hold the diamond hole saw still during the process. From 6mm to 50mm all the hole saws can fit in this guide..
  • 【ᴛɪᴘs】When the diamond drill bit is working, continuous cooling with water is key to reduce the chance of burning your bit, extending the life of the drill..
Check Stock