Categories

Best Diamond Multi Segment

SHDIATOOL Tile Diamond Saw Blades Porcelain Cutter Disc for Dry/Wet Cutting Grinding Ceramic Marble Artificial Stone Diameter 4.5 Inches x 7/8 inch

  • Dimensions: 115x1.9x22.23mm (Diameter x Thickness x Hole),Diamond Segment Height-Front 20mm,Diamond Segment Height-Back 10mm.
  • Special Design:the double-sided cutter head,Front/back diamond segment height- 20/10mm,can allow for trim/grind on front face and make straight cuts and grind bullnose edge.
  • X Mesh turbo rim segments are Sharp and Wear-resistant,can help to cool and bring the dust out and get more efficient and better performance.
  • Hot pressed Technology with high-quality diamonds of this Tile Marble blade provides longer working life and more accurate straight line cuts.
  • Dry/Wet Cut and Grind Ceramic,Tile,Marble,Artificial Stone, Ultra-clean, spark-free and chip-free cuts.
Check Stock

SHDIATOOL 2 Pack 5 inch Diamond Blades for Concrete Stone Brick Block Masonry Dry Wet Segmented Cutting Wheel Disc for Angle Grinder with 7/8 Arbor

  • 5" Diamond Segmented Saw Blades with Multi Hole, 2 Pieces/Pack.
  • Diameter 125mm(5"), Segment height 10mm, Segments thickness 2.0-2.1mm, for 7/8" arbor.
  • Dry Cutting Concrete Block Brick, Granite, Stone, be used with angle grinder or hand saw or table saw.
  • Manufactured with high quality and durable heat-treated manganese steel and diamond, provides a smooth, fast, clean cutting and longer cutting life.
  • Multi-hole design help to improve the performance and low down the noise.
Check Stock

SHDIATOOL Tile Diamond Saw Blade, Cutting Grinding Disc Wheel 125mm/5inch for Dry/Wet Cutting & Grinding Porcelain Ceramic Tile Granite Marble Artificial Stone …

  • Dimensions: 125x1.9x22.23mm (Diameter x Thickness x Hole),Diamond Segment Height-Front 20mm,Diamond Segment Height-Back 10mm.
  • Special Design:the double-sided cutter head,Front/back diamond segment height- 20/10mm,can allow for trim/grind on front face and make straight cuts and grind bullnose edge.
  • X Mesh turbo rim segments are Sharp and Wear-resistant,can help to cool and bring the dust out and get more efficient and better performance.
  • Hot pressed Technology with high-quality diamonds of this Tile Marble blade provides longer working life and more accurate straight line cuts.
  • Dry/Wet Cut and Grind Ceramic,Tile,Marble,Artificial Stone, Ultra-clean, spark-free and chip-free cuts.
Check Stock

Radiac 34078809 8"x 1/2"x 1-1/4" RA46-G800-VOS Ruby Surface Grinding Wheel

  • Double Row Segmented Diamond Cup Wheel are designed for grinding concrete and fieldstone, it's an ideal concrete grinding wheel 4 1/2 for angle grinder..
  • The double row diamond cup grinding wheel is suitable for grinding machines and angle grinders to remove thinset and excess materials on your surface quickly..
  • The double segment of this diamond grinder cup configuration allows faster material removal ideal for all types of stone like concrete, ceramic, tile, marble, granite, rock, cement, etc..
  • Using the diamond grinding wheel 4 1/2 inch for surface finishing on concrete, screed, and natural stone like granite, can also be used for the removal of glues and epoxies or thinnest.
  • Durable high-quality brazed Double row segments diamond grinding cup wheel for fast and smooth grinding with 5mm segment height use on both wet or dry surfaces..
Check Stock

EZARC Oscillating Multi Tool Swing Diamond Blades, Diamond Oscillating Tool Blade, Mortar Cutting Saw Blades for Grout Removal DO57S, 3-Pack

  • 【Diamond Grit Technology】High-temperature quenching of diamond enhances wear resistance. This premium diamond oscillating saw blade has 5 times longer life than carbide grit blades in tough applications..
  • 【Precise & Clean Cut】 Diamond grit edge has a kerf approx. 0.09 inch (2.2 mm), which can achieve a perfectly clean and precise cutting effect. Segment swing grit grout blade is particularly suitable for precise cutting and short cutting as well as precise working right into corners and on edges..
  • 【Unique Design】The oscillating diamond blade with a flat side swing design can easily access into tight space like corners. So it is easy to replace the new tile..
  • 【Cutting Material】This diamond oscillating multi tool blade is used to remove defective tile grout, clean up the mortar, plaster, and porous concrete to clean and rework planked deck joints..
  • 【Wide Applications】EZARC diamond oscillating saw blades can be used for bathroom renovation, flooring work, trimming and correcting work, remove grits or grouts, clean up the mortar before fixing, and various household maintenance around the house.
Check Stock

8 Oz Attack Epoxy Adhesive Removal Solvent for Metals Stones Glass Wood Glue Removing Residue Dissolving Jewelry Cleaning Solution

  • RCD Technology - Reinforced Compound Diamond Technology, a new concept and invented technology of diamond segment production. RCD segment shows excellent diamond keeping ability with high durability against impact and abrasion. Check product description for more information..
  • REMOVING - Ideal grinding cup for removing Urethane, Epoxy, Glue on concrete floor. DOUBLE diamond layer for effective removing work..
  • COMPETITIVE & ECONOMICAL - This is economical and price competitive than typical PCD grinding cups in the market..
  • RUBBER CUSHIONED CORE - The rubber cushioned sandwich core enables user-friendly use. This absorbs noise and vibration. Sandwich type : Steel + Rubber + Steel..
  • MINIMUM DAMAGE - Spike Grinding wheels minimize the damage caused to the floor, for clean and effective work..
Check Stock

Delta Diamond Kick-Asphalt 8 Inch Diamond Blade, Segmented, Wet/Dry Cutting Asphalt, Green Concete, Masonry Block, and Similar Materials (8\)

  • PREMIUM DIAMOND BLADE - Kick-Asphalt uses premium diamond segments and is designed to cut asphalt, green concrete (poured within 72 hours), masonry block, and similar abrasive materials..
  • 10MM SEGMENTS - 10MM tall diamond segments maximize cutting life and provide a low cost per cut..
  • DEEP U GULLETS - This unique segment/keyslot design allows for better air cooling and chip deflection resulting in better performance..
  • SPECIFICATIONS - 8" diameter X .090 thick with a diamond-7/8" arbor. Also included is a 5/8" bushing. Fits most hand-held angle grinders and circular saws. Heat-treated high-speed steel core is guaranteed to withstand the demands of dry cutting. Expected blade life is approximately 4,000 inch feet (one inch foot = 12" length X 1" depth). The recommended operating speed is 4,500 rpm..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool will be replaced free of charg....
Check Stock

4-1/2\ Segmented Diamond Saw Blade for Concrete Brick Block and Masonry, 10mm Segment Height, 7/8\-5/8\ Arbor

  • MULTIPURPOSE - 4.5" blade designed to cut a wide range of construction materials including concrete, brick, block, masonry with performance/price ratio in mind.
  • VERSATILITY - segmented style for fast cuts on concrete, block, brick and stone or turbo style for smooth cuts on concrete, masonry and stone.
  • SHARP SEGMENTED TEETH - diamond encrusted segment allows efficient and precise cuts.
  • USE WET OR DRY - recommended to use high speed handheld saws or lightweight walk-behind saws.
Check Stock

7\ Segmented Diamond Saw Blade for Concrete Brick Block and Masonry, 10mm Segment Height, 7/8\ Bushing w/Diamond Arbor

  • MULTIPURPOSE - 7" blade designed to cut a wide range of construction materials including concrete, brick, block, masonry with performance/price ratio in mind.
  • VERSATILITY - segmented style for fast cuts on concrete, block, brick and stone or turbo style for smooth cuts on concrete, masonry and stone.
  • SHARP SEGMENTED TEETH - diamond encrusted segment allows efficient and precise cuts.
  • USE WET OR DRY - recommended to use high speed handheld saws or lightweight walk-behind saws.
Check Stock

(3 Pack, 4 1/2 inches) GRAFF Diamond Blade for Angle Grinder - Diamond Cutting Wheel for Dry and Wet Cutting Stone, Marble, Granite, Brick, Masonry, Paving Flag, Concrete, Ceramic & Kerb

  • ✔︎ CONTINUOUS RIM BLADE has a high content of soldered diamond segment that makes its ideal for cutting ceramic & ceramic tile..
  • ✔︎ TURBO BLADE - diamond blade for cutting most materials including concrete, tile, stone, ceramic, paving flag, marble, granite, brick, masonry & curb..
  • ✔︎ SEGMENTED BLADE – diamond blade has teeth with diamond segments that allow cutting stone, marble, granite, brick, masonry & paving flag..
  • ✔︎ Our blades are suitable for DRY & WET CUTTING and can SELF-SHARPEN by erasing diamond grits during operation(2 or 3 cuts on silicon/abrasive stone)..
  • ✔︎ SPECIFICATIONS: Diameter: 4 ½ Inch (115 mm), Arbor: 7/8 Inch with 5/8 Inch adapter, Cutting width: 2 mm/2.5 mm/2mm, Segment height: 10 mm/10mm/7mm..
Check Stock

BRSCHNITT Diamond Blade Set,5 Inch Arbor 7/8\ - 5/8\ for Granite,Stone,Masonry,Terrazzo,Paver,Concrete,Pack of 2 Dry/Wet Circular Saw Cutter Angle Grinder Diamond Cutting Disc 125mm

  • ✔Size --Total 2pcs,5"(125mm),segment height 7mm ,turbo rim segment thickness 2.4mm ,segmented rim segment thickness 2mm,Arbor 22.23mm(7/8-Inch) ,includes a 20mm(4/5") and 16mm(5/8") arbor adapter Bushing in the package.
  • ✔Our diamond cutting wheel are designed to provide fast, smooth and extremely clean cutting in a variety of materials, including masonry brick, granite, marble,concrete,stone,slate and stucco.
  • ✔Turbo rim diamond cutting saw blade and general purpose power saw segmented diamond blade for smooth & fast cutting of Granite,Stone,Masonry,Terrazzo, Paver,Concrete.
  • ✔Our blades are suitable for Dry or Wet Cutting,More efficient by Dry Cutting and Wet Cutting for long life time.
  • ✔Machine --For use on Tile saws, circular saws, and angle grinders.It is suitable for 7 / 8 "inner hole machine, also suitable for 4/5" or 5 / 8 "inner hole machine through arbor adapter Bushing.
Check Stock

SHDIATOOL 2PCS 14-Inch Concrete Saw Blade with diamond Segment Wet Cutting

  • 2pcs 14"/360mm Sintered Diamond saw blade Cutting Discs for concrete.
  • Diameter 14"/360MM, Bore 25.4MM with pin hole, Diamond height 15MM, Segment thickness 3MM.
  • Wet Cutting and very competitive in cutting conrete block,Paver.
  • Innovated segment design gives clean and fast cutting.
  • If the value of your order is more than $100 in our store,we'd like to send it to you by free UPS from China. Attention: Only for American order.
Check Stock

(10 Pack) VTXMax VSS 16 inch Dry or Wet Cutting General Purpose Power Saw Segmented Diamond Blades for Concrete Stone Brick Masonry (16" - 10 pcs)

  • 10-PACK 16 inch diamond saw blades designed to provide fast, smooth cutting in a variety of materials, including brick/block, paves, concrete and stone..
  • Can be used wet or dry. For light or medium duty cutters..
  • Segment height 10mm. Arbor 1". Size is 16"x.125"x.395"/13mm. Includes 20mm heavy duty bushing..
  • This diamond blade belongs to Vortex Diamond General Purpose Segment Series.
Check Stock