Categories

Best Diamond Segments For Multi blades

GRAFF Diamond Blade for Angle Grinder - Diamond Cutting Wheel for Cutting Stone, Marble, Granite, Brick, Masonry, Paving Flag, Concrete - Diamond Saw Blades Segment Height 0.394” (10 mm) - 5 inches

  • UNIVERSAL - 5" Diamond blade for angle grinder is designed for domestic use and DIY. GRAFF segmented diamond cutting wheel is intended for working with Stone, Marble, Granite, Brick, Masonry, Paving Flag, Concrete & Curb. Our 5" angle grinder concrete blade can be used both for dry and wet cutting..
  • INCREASED OPERATING TIME - Diamond blade for angle grinder is constructed so that during operation it heats up more slowly which leads to an increase in operating time..
  • DURABLE - Diamond angle grinder blade GRAFF can self-sharpen by erasing diamond grits during operation. For sharpening it is needed to make two or three cuts on silicon or abrasive stone..
  • HIGH SOLIDITY - Diamond blade for granite and stone is designed for precise cutting of concrete using small-sized angle grinders with 7/8” Arbor. This saw blade has a frame made of improved steel which ensures high solidity during operation..
  • SPECIFICATIONS - GRAFF concrete diamond blade 5 has teeth with soldered diamond segments all around. Diameter: 5 Inch (125 mm), Arbor: 7/8 Inch (22.23 mm) with 5/8 Inch (15.88 mm) Adapter, Cutting width: 0.079 Inch (2 mm), Segment height: 0.394 Inch (10 mm), Segments number: 9. Diamond concrete saw blade has a tough body with 0.047 Inch (1.2 mm) thickness..
Check Stock

Delta Diamond Cougar S 14 Inch Premium Diamond Saw Blade, .125 X 1\-20mm Arbor, Dry or Wet Cutting Reinforced Concrete w/ Rebar, Masonry, Stone, Laser-Welded Segmented (14\)

  • ...e (up to 9,000 psi) wtih rebar, asphalt, green concrete, masonry, hard stone (such as quartzite) and all similar materials..
  • USE WET OR DRY - Use Cougar S 14" diamond blades wet or dry. The center core is made from heat-treated high-speed steel and is guaranteed to withstand the demands of dry cutting..
  • PREMIUM TURBO SEGMENTS - Alternating notched turbo diamond segments cut through material with greater efficiency than all flat, smooth segments. The result is a concrete cutting blade that cuts fast and straight with minimal stress on the operator and machine..
  • SPECIFICATIONS - 14" diameter X .125 (1/8") thick and has a 1" arbor hole, 3/8" drive pin hole and 20mm bushing. Max 5,460 rpm. For use with hand-held power saws or walk-behind saws up to 35 HP. Expected blade life is 8,000 inch feet (inch foot=12" long cut X 1" depth)..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool ....
Check Stock

Delta Diamond Cougar S 16 Inch Premium Diamond Saw Blade, .125 X 1\-20mm Arbor, Dry or Wet Cutting Reinforced Concrete w/ Rebar, Masonry, Stone, Laser-Welded Segmented (16\)

  • ...e (up to 9,000 psi) wtih rebar, asphalt, green concrete, masonry, hard stone (such as quartzite) and all similar materials..
  • USE WET OR DRY - Use Cougar S 16" diamond blades wet or dry. The center core is made from heat-treated high-speed steel and is guaranteed to withstand the demands of dry cutting..
  • PREMIUM TURBO SEGMENTS - Alternating notched turbo diamond segments cut through material with greater efficiency than all flat, smooth segments. The result is a concrete cutting blade that cuts fast and straight with minimal stress on the operator and machine..
  • SPECIFICATIONS - 16" diameter X .125 (1/8") thick and has a 1" arbor hole, 3/8" drive pin hole and 20mm bushing. Max 4,750 rpm. For use with hand-held power saws or walk-behind saws up to 35 HP. Expected blade life is 9,000 inch feet (inch foot=12" long cut X 1" depth)..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool ....
Check Stock

Virginia Abrasives 425-07388 UV Multi-Purpose High Speed Diamond Blade (14\) Asphalt/Concrete Cutter - Wet or Dry - High Speed Cutoff - Performance Cutting Blades (14\ x .125\ x 1\/20mm DP - 10mm Segments)

  • ... Virginia Abrasives laser welded diamond blades are ideal for concrete cutting, or dry cutting, due to their high welding strength. Our laser welded diamond Blade will have a longer life span and stronger cut than brazed diamond blades as the bond between the segment and core is significantly stronger..
  • LASER WELDED SEGMENTS: Rather than sintered blades that have a shorter life and do not cut as efficiently, the Virginia Abrasives diamond saw blades are laser welded to extend the life of every saw diamond blade as well having the ability to cut faster..
  • HIGH-LEVEL PRECISION: As well as reducing the strain on the concrete structure, the high-performance nature of our diamond concrete saw blades make sure it gives it a smooth cut. For more comfort and high-speed cutting, choose our saws blades for your next project..
  • DURABLE: Virginia Abrasives diamond saw blades are highly durable compared to other types of concrete cutting blades out there. Our diamond blade is made using a circular steel cutting disc with huge 12-mm segments on the outer edge that will maintain precision and performance for a long time.
  • OUR STORY: Virginia Abrasives' roots date back to the early 1970s when a hard rock garnet mining business in the Adirondack mountains of New York. ....
Check Stock

EZARC 4.5 inch Diamond Blade, Turbo Diamond Saw Blades for Angle Grinder, 4.5" Stone Blade for Fast Cutting Porcelain Ceramic Granite Marble Brick(2-Pack)

  • 【Stone Cutting Master】EZARC Diamond Blade offers excellent performance and efficiency when it comes to cutting through masonry materials such as ceramic, granite, marble, concrete and brick..
  • 【Turbo Segments】The turbo design reduces debris and provides a smoother, cleaner cut, resulting in a more professional surface finish. By minimizing vibrations during the cutting process, it enhances user comfort and control, making the overall experience more enjoyable and precise..
  • 【Diamond Grit】The strategic positioning of turbo segments in our diamond blade ensures optimal cooling, preventing overheating and extending its lifespan. With premium HRC90+ diamond grit and a special dimensional arrangement, this versatile diamond masonry blade offers maximum cutting life for heavy-duty demands..
  • 【Compatibility】EZARC 4-1/2 inch diamond cutting wheel is suitable for most tile saws, hand-held angle grinders and wet saws with a 7/8" Arbor (includes a adaptor for 5/8" arbor). Disc Size: 4.5 Inch.
Check Stock

Delta Diamond Mad Dog HS 7 Inch Segmented Diamond Saw Blade, .095 X DM-7/8\-5/8\ Arbor, Premium, Wet/Dry, Laser-Welded, General Purpose Cutting Concrete, Masonry, Stone (7\)

  • PREMIUM LASER-WELDED SEGMENTS - Premium, long lasting, and durable diamond segments are laser-welded for added strength..
  • WET OR DRY - Use dry or wet on cured concrete, masonry, brick, block, roofing tile, stone, pavers, slate, terrazzo, and similar materials..
  • HEAVY DUTY GENERAL PURPOSE - Great for harder materials or when you want a blade that lasts. Mad Dog HS Premium blades last longer and cut faster than standard blades..
  • SPECIFICATIONS - 7" diameter X .095 thick with a Diamond Knockout-7/8" arbor. Preinstalled 5/8" bushing for adapting to other circular saws and grinders. The maximum safe operating speed is 8,730 RPM..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool will be replaced free of charge..
Check Stock

Delta Diamond Mad Dog HS 9 Inch Segmented Diamond Saw Blade, .095 X DM-7/8\-5/8\ Arbor, Premium, Wet/Dry, Laser-Welded, General Purpose Cutting Concrete, Masonry, Stone (9\)

  • PREMIUM LASER-WELDED SEGMENTS - Premium, long lasting, and durable diamond segments are laser-welded for added strength..
  • WET OR DRY - Use dry or wet on cured concrete, masonry, brick, block, roofing tile, stone, pavers, slate, terrazzo, and similar materials..
  • HEAVY DUTY GENERAL PURPOSE - Great for harder materials or when you want a blade that lasts. Mad Dog HS Premium blades last longer and cut faster than standard blades..
  • SPECIFICATIONS - 9" diameter X .095 thick with a Diamond Knockout-7/8" arbor. Preinstalled 5/8" bushing for adapting to other circular saws and grinders. The maximum safe operating speed is 6,700 RPM..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool will be replaced free of charge..
Check Stock

Delta Diamond Cougar HS 14 Inch Segmented Diamond Saw Blade, Premium, General Purpose Cutting of Concrete, Masonry, Pavers, Stone, .125 X 1\-20mm Arbor (14\)

  • ...gregate cured concrete, masonry, concrete or clay pavers, various types of stone and all similar materials. Not recommended for reinforced concrete with rebar, green concrete, or asphalt applications. View our other blades by Delta Diamond like the Cougar HD, Cougar S or the Kick-Asphalt Diamond Blade instead..
  • 12MM SEGMENTS - Premium grade 12MM tall diamond segments are designed for long cutting life with fast, smooth cutting in a wide range of materials..
  • WET OR DRY CUTTING - The center core is made from a tensioned, heat-treated hi-speed steel and is guaranteed to withstand the demands of dry cutting..
  • SPECIFICATIONS - 14" diameter X .125 (1/8") thick and has a 1" arbor hole with 3/8" drive pin hole and 20mm bushing. Max 5,460 rpm. For use with hand-held power saws, 5-20 hp concrete saws, or masonry saws..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking, and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool will be replaced ....
Check Stock

Delta Diamond Cougar HS 12 Inch Segmented Diamond Saw Blade Premium General Purpose Cutting of Concrete Masonry Pavers Stone .125 X 1 -20mm Arbor 12

  • ...gregate cured concrete, masonry, concrete or clay pavers, various types of stone and all similar materials. Not recommended for reinforced concrete with rebar, green concrete, or asphalt applications. View our other blades by Delta Diamond like the Cougar HD, Cougar S or the Kick-Asphalt Diamond Blade instead..
  • 12MM SEGMENTS - Premium grade 12MM tall diamond segments are designed for long cutting life with fast, smooth cutting in a wide range of materials..
  • WET OR DRY CUTTING - The center core is made from a tensioned, heat-treated hi-speed steel and is guaranteed to withstand the demands of dry cutting..
  • SPECIFICATIONS - 12" diameter X .125 (1/8") thick and has a 1" arbor hole with 3/8" drive pin hole and 20mm bushing. Max 6,300 rpm. For use with hand-held power saws, 5-20 hp concrete saws, or masonry saws..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking, and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool will be repla....
Check Stock

DEWALT Diamond Blade, Tuck Point, 4-1/2-Inch x 1/4-Inch (DW4740)

  • Extended performance diamond matrix provides 350x's the life of conventional abrasives.
  • Segmented rim blades are laser welded with heat treated steel bodies.
  • Large diamond segments with cobalt is ideal for use across varios product applications.
  • Large diamond segments with cobalt is ideal for use across various product applications.
Check Stock

Delta Diamond Cougar HS 10 Inch Segmented Diamond Saw Blade, Premium, General Purpose Cutting of Concrete, Masonry, Pavers, Stone, .095 X DM-7/8\-5/8\ Arbor (10\)

  • ...gregate cured concrete, masonry, concrete or clay pavers, various types of stone and all similar materials. Not recommended for reinforced concrete with rebar, green concrete, or asphalt applications. View our other blades by Delta Diamond like the Cougar HD, Cougar S or the Kick-Asphalt Diamond Blade instead..
  • 12MM SEGMENTS - Premium grade 12MM tall diamond segments are designed for long cutting life with fast, smooth cutting in a wide range of materials..
  • WET OR DRY CUTTING - The center core is made from a tensioned, heat-treated hi-speed steel and is guaranteed to withstand the demands of dry cutting..
  • SPECIFICATIONS - 10" diameter X .095 thick with a standard DM-7/8"-5/8" Arbor. Fits most 10" concrete saws and masonry saws. Make sure to check your saws arbor to ensure correct fitment. Max. 6,115 rpm..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking, and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool will be replaced free....
Check Stock

Delta Diamond Cougar HS 14 Inch 3-Pack Segmented Diamond Saw Blade, Premium, General Purpose Cutting of Concrete, Masonry, Pavers, Stone, .125 X 1\-20mm Arbor (14\ 3pcs)

  • ...gregate cured concrete, masonry, concrete or clay pavers, various types of stone and all similar materials. Not recommended for reinforced concrete with rebar, green concrete, or asphalt applications. View our other blades by Delta Diamond like the Cougar HD, Cougar S or the Kick-Asphalt Diamond Blade instead..
  • 12MM SEGMENTS - Premium grade 12MM tall diamond segments are designed for long cutting life with fast, smooth cutting in a wide range of materials..
  • WET OR DRY CUTTING - The center core is made from a tensioned, heat-treated hi-speed steel and is guaranteed to withstand the demands of dry cutting..
  • SPECIFICATIONS - 3 Pack of 14" diameter X .125 (1/8") thick and has a 1" arbor hole with 3/8" drive pin hole and 20mm bushing. Max 5,460 rpm. For use with hand-held power saws, 5-20 hp concrete saws, or masonry saws..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking, and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool will be....
Check Stock

(10 PACK) SUPREMAX Heavy-Duty 14 inch Supreme Quality Dry/Wet Cutting Diamond Blades for Concrete Asphalt Masonry Stone (14" - 10 pcs)

  • 10-PACK of supreme quality diamond saw blades with versatile slant segments, it is an excellent combo blade for variety cutting. The undercut segments can help to fit with the abrasive undercutting conditions..
  • Perfect all Cut Hard Concrete, Rebar, Brick, Block, Stone Paver, Granite, Marble, Tile, Roof Tile Asphalt, Green Concrete, Limestone, Ductile Iron Pipe..
  • The core is made from heat-treated hi-speed steel and is guaranteed to withstand the demands of dry cutting. The 12mm tall diamond segments provide maximum cutting life with the lowest cost per cut. Expected blade life is 6,000 inch feet (inch foot=12" long cut X 1" depth)..
  • The 3/8" core holes are used as depth indication for operator convenience as well as cooling and dust/slurry removal. Laser welded. Can be used wet or dry..
  • Arbor 1"-20mm. Size 14"x.125"x..472"/12mm..
Check Stock