Categories

Best Diamond Sintered Segments

SHDIATOOL 12 Inch Diamond Saw Blade Cutting Porcelain Tile Ceramic Granite Marble Brick

  • Diameter 12"(300mm)，bore 1"(25.4mm) with 1"-20mm arbor, Segment thickness 2.0mm, Dry or wet cutting,.
  • The cutting disc is Designed for cutting porcelain tile ceramic granite marble brick ect.
  • Super Thin X Turbo Segments provide chip free and fast cutting.
  • Reinforced ring core on both side of blade, make cutting more stable and get better finishing.
  • Hot-pressed sintered blade with very high quality diamond grain provide long working life.
Check Stock

Delta Diamond Kick-Asphalt 8 Inch Diamond Blade, Segmented, Wet/Dry Cutting Asphalt, Green Concete, Masonry Block, and Similar Materials (8\)

  • PREMIUM DIAMOND BLADE - Kick-Asphalt uses premium diamond segments and is designed to cut asphalt, green concrete (poured within 72 hours), masonry block, and similar abrasive materials..
  • 10MM SEGMENTS - 10MM tall diamond segments maximize cutting life and provide a low cost per cut..
  • DEEP U GULLETS - This unique segment/keyslot design allows for better air cooling and chip deflection resulting in better performance..
  • SPECIFICATIONS - 8" diameter X .090 thick with a diamond-7/8" arbor. Also included is a 5/8" bushing. Fits most hand-held angle grinders and circular saws. Heat-treated high-speed steel core is guaranteed to withstand the demands of dry cutting. Expected blade life is approximately 4,000 inch feet (one inch foot = 12" length X 1" depth). The recommended operating speed is 4,500 rpm..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool will be replaced free of charg....
Check Stock

DEWALT Diamond Blade, Tuck Point, 4-1/2-Inch x 1/4-Inch (DW4740)

  • Extended performance diamond matrix provides 350x's the life of conventional abrasives.
  • Segmented rim blades are laser welded with heat treated steel bodies.
  • Large diamond segments with cobalt is ideal for use across varios product applications.
  • Large diamond segments with cobalt is ideal for use across various product applications.
Check Stock

Virginia Abrasives 425-06315 BD Asphalt/Green Concrete High-Speed Diamond Blade (14\) Wet or Dry, (14\ x .125\ x 1\/20mm DP - 12mm Segments)

  • HIGH-SPEED DIAMOND BLADE: This diamond blade is an ideal asphalt and green concrete saw blade due to the hard bond of the diamonds, which is perfect for soft materials. This blade will work well on a variety of saws..
  • GOOD DIAMOND CONCENTRATION: Our BD diamond blades are priced for affordablity with a good diamond concentration and good durability..
  • UNDERCUT PROTECTION: Designed with alternating drop segments and U-Slot gullets, BD Asphalt & Green Concrete Diamond Blade has alternating drop segments that help clear out slurry when cutting. Use in wet or dry conditions to get clean cuts..
  • DURABLE: Virginia Abrasives Diamond Saw Blades are expertly crafted using a circular steel cutting disc with 12mm segments on the outer edge. This also helps with the performance of our product in terms of precision and life span..
  • OUR STORY: Virginia Abrasives' roots date back to the early 1970s when a hard rock garnet mining business in the Adirondack mountains of New York. Our initial focus was aimed at producing the world's best sandpaper, using hard-rock garnet abrasives. Over time and due to customer requests, the company's markets as well as product lines have expanded into a broader offering for the construction trades..
Check Stock

Diamond 4 inch Concrete Hole Saw Masonry Core Drill Bit Heavy Duty for Brick, Cinder Block Standard Shank Drilling Holesaw Tool

  • Durable 4 core drill bits for concrete, exactly 4 inches diameter. Tool Life: 7 to 10 holes in concrete. Not for Hammer or Impact drilling..
  • Concrete hole saw 4 inch with 2 inch depth of cut and standard 3/8 inch shank for standard cordless or electric drill. Not for hammer action.
  • 4 in concrete hole saw dry or wet use drilling holes in concrete block, brick, stones, basement walls, foundations, tile, marble, granite countertop, ceramic, porcelain.
  • Sintered diamond 4 in concrete core saw bits for concrete..
  • Diamond is sintered, not visible. Laser welded diamond concrete hammer core bit fits your standard drill. If abused, this hole saw will no last more than a few uses..
Check Stock

Delta Diamond Cougar S 14 Inch Premium Diamond Saw Blade, .125 X 1\-20mm Arbor, Dry or Wet Cutting Reinforced Concrete w/ Rebar, Masonry, Stone, Laser-Welded Segmented (14\)

  • ...e (up to 9,000 psi) wtih rebar, asphalt, green concrete, masonry, hard stone (such as quartzite) and all similar materials..
  • USE WET OR DRY - Use Cougar S 14" diamond blades wet or dry. The center core is made from heat-treated high-speed steel and is guaranteed to withstand the demands of dry cutting..
  • PREMIUM TURBO SEGMENTS - Alternating notched turbo diamond segments cut through material with greater efficiency than all flat, smooth segments. The result is a concrete cutting blade that cuts fast and straight with minimal stress on the operator and machine..
  • SPECIFICATIONS - 14" diameter X .125 (1/8") thick and has a 1" arbor hole, 3/8" drive pin hole and 20mm bushing. Max 5,460 rpm. For use with hand-held power saws or walk-behind saws up to 35 HP. Expected blade life is 8,000 inch feet (inch foot=12" long cut X 1" depth)..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool ....
Check Stock

Delta Diamond Cougar S 16 Inch Premium Diamond Saw Blade, .125 X 1\-20mm Arbor, Dry or Wet Cutting Reinforced Concrete w/ Rebar, Masonry, Stone, Laser-Welded Segmented (16\)

  • ...e (up to 9,000 psi) wtih rebar, asphalt, green concrete, masonry, hard stone (such as quartzite) and all similar materials..
  • USE WET OR DRY - Use Cougar S 16" diamond blades wet or dry. The center core is made from heat-treated high-speed steel and is guaranteed to withstand the demands of dry cutting..
  • PREMIUM TURBO SEGMENTS - Alternating notched turbo diamond segments cut through material with greater efficiency than all flat, smooth segments. The result is a concrete cutting blade that cuts fast and straight with minimal stress on the operator and machine..
  • SPECIFICATIONS - 16" diameter X .125 (1/8") thick and has a 1" arbor hole, 3/8" drive pin hole and 20mm bushing. Max 4,750 rpm. For use with hand-held power saws or walk-behind saws up to 35 HP. Expected blade life is 9,000 inch feet (inch foot=12" long cut X 1" depth)..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool ....
Check Stock

Virginia Abrasives Ultra Value Concrete Diamond Blade - Wet or Dry Concrete Tools/Masonry Tools, 14\ Saw Blades, Cutting Tool for High Speed & Walk Behind Saw, General Purpose Ceramic Blade, 14 inches

  • ...UTTING WHEEL: Virginia Abrasives' diamond blades are the ideal concrete cutting blade for High-Speed Saws, Walk Behind Saws, and Cut-Off Saws due to their high welding strength. With a significantly stronger bond between the segment and core, our diamond saw blades are sure to offer a longer life span..
  • LASER WELDED SEGMENTS: We ensure that your tough jobs are completed quickly with our industrial diamond blade 14 inch cutter. With laser-welded segments, it extends the life of every saw diamond blade while performing to its utmost ability..
  • HIGH-LEVEL PRECISION: As one tries to reduce the strain on the concrete structure, our 14 inch concrete saw blade makes sure to provide a high-performing smooth cut. Freely choose our diamond concrete saw for easy high-speed cutting on your next project..
  • DURABLE QUALITY: Our masonry blade is made with an industrial diamond that can outperform regular blades. It is made using a circular steel cutting disc with huge 12mm segments on the outer edge that will maintain precision grinding performance for a long time..
  • OUR STORY: Virginia Abrasives was founded in the early 1970s during a period of hard rock garnet mining in the Adirondack Mountains of New York. Over time, the company's markets and product lines have expande....
Check Stock

Diablo by Freud DMADST1400 14 in Diamond Segmented Turbo Cut-Off Discs for Masonry

  • Diamond segment SPEED-Edge slot design reduces vibration, providing high cutting speeds that deliver up to 30% faster cuts than standard segmented diamond discs.
  • 60% taller segments containing superior quality diamonds along with an ultra-durable bond to the disc body for up to 4x longer life. Hardened disc body absorbs vibration and increases impact resistance to deliver superior quality cuts in hardened materials. Optimized diamonds segments and diamond distribution lead to constant diamond exposure for maximum performance in high speed cutting applications. For dry and wet cutting..
Check Stock

Virginia Abrasives Ultra Value Concrete Diamond Blade - Wet or Dry Concrete Tools/Masonry Tools 14 Saw Blades Cutting Tool for High Speed & Walk Behind Saw General Purpose Ceramic Blade 14 inches

  • ...UTTING WHEEL: Virginia Abrasives' diamond blades are the ideal concrete cutting blade for High-Speed Saws, Walk Behind Saws, and Cut-Off Saws due to their high welding strength. With a significantly stronger bond between the segment and core, our diamond saw blades are sure to offer a longer life span..
  • LASER WELDED SEGMENTS: We ensure that your tough jobs are completed quickly with our industrial diamond blade 14 inch cutter. With laser-welded segments, it extends the life of every saw diamond blade while performing to its utmost ability..
  • HIGH-LEVEL PRECISION: As one tries to reduce the strain on the concrete structure, our 14 inch concrete saw blade makes sure to provide a high-performing smooth cut. Freely choose our diamond concrete saw for easy high-speed cutting on your next project..
  • DURABLE QUALITY: Our masonry blade is made with an industrial diamond that can outperform regular blades. It is made using a circular steel cutting disc with huge 12mm segments on the outer edge that will maintain precision grinding performance for a long time..
  • OUR STORY: Virginia Abrasives was founded in the early 1970s during a period of hard rock garnet mining in the Adirondack Mountains of New York. Over time, the company's markets and product lines have expande....
Check Stock

Diablo by Freud DMADST0450 4-1/2 in. Diamond Segmented Turbo Cut-Off Discs for Masonry

  • Diamond segment SPEED-Edge slot design reduces vibration, providing high cutting speeds that deliver up to 30% faster cuts than standard segmented diamond discs.
  • 60% taller segments containing superior quality diamonds along with an ultra-durable bond to the disc body for up to 4x longer life. Hardened disc body absorbs vibration and increases impact resistance to deliver superior quality cuts in hardened materials. Optimized diamonds segments and diamond distribution lead to constant diamond exposure for maximum performance in high speed cutting applications. For dry and wet cutting..
  • Compatible with 7/8”, 20mm and 5/8” arbors.
Check Stock

Diablo by Freud DMADST1200 12 in. Diamond Segmented Turbo Cut-Off Discs for Masonry Multi, One Size

  • Diamond segment SPEED-Edge slot design reduces vibration, providing high cutting speeds that deliver up to 30% faster cuts than standard segmented diamond discs.
  • 60% taller segments containing superior quality diamonds along with an ultra-durable bond to the disc body for up to 4x longer life. Hardened disc body absorbs vibration and increases impact resistance to deliver superior quality cuts in hardened materials. Optimized diamonds segments and diamond distribution lead to constant diamond exposure for maximum performance in high speed cutting applications. For dry and wet cutting..
Check Stock

Diablo by Freud DMADST1000 10 in. Diamond Segmented Turbo Cut-Off Discs for Masonry Multi, One Size

  • Diamond segment SPEED-Edge slot design reduces vibration, providing high cutting speeds that deliver up to 30% faster cuts than standard segmented diamond discs.
  • 60% taller segments containing superior quality diamonds along with an ultra-durable bond to the disc body for up to 4x longer life. Hardened disc body absorbs vibration and increases impact resistance to deliver superior quality cuts in hardened materials. Optimized diamonds segments and diamond distribution lead to constant diamond exposure for maximum performance in high speed cutting applications. For dry and wet cutting..
  • Compatible with 7/8” and 5/8” arbors.
Check Stock