Categories

Best Diamond Tip Hole Saw 16

zerotop Diamond Drill Bits with Hole Saw Guide 16Pcs Hole Saw Set with Triangle Drill Bit Set & Screwdriver Suitable for Ceramic, Glass, Tile, Marble Porcelain

  • 【Durable Material】The diamond hole saw is made of high-temperature sintered industrial-grade carbon steel and has a long service life. It has a nickel-plated coating to resist corrosion, wear resistance, durability. Each hole is smooth and precise surface treatment, and the top is thickened with diamond to achieve excellent cutting strength..
  • 【Large Clearance Hole】The large clearance holes of the drill bit help the cooling water to enter and flush particles such as chips, reducing drilling resistance. When the debris is stuck in the small hole saw, you can use the equipped screwdriver to pull it out to make the drilling process smooth and easy..
  • 【Adjustable Drill Guide】The minimum and maximum opening lengths of the adjustable hole saw guidance fixture is 4mm/0.16in and 84mm/3.3in respectively, which can fix hole saws of any size. The diamond drill bit set has two modes (fixed 3 or 4 bearings) for your choice. You take off the two big nuts and install the chassis in reverse, and install one of the bearings to the center to form a three-bearing..
  • 【Wide Usage】The diamond hole saw drill bit set is very suitable for removing rings on marble, tiles, glass, ceramics, PVC or other materials. It is the excellent choice for your home decoration, D....
Check Stock

15 Pcs Diamond Drill Bits for Ceramic, Diamond Hole Saw Drill Bit Set Kit, Premium Glass Drill Bit for Bottles,Pots, Marble, Granite Stone, Tile Cutting 0.23 Inch - 2 Inch（6mm - 50mm）YLYL

  • 【15 Sizes】Diamond drill bits for ceramic, 6mm/0.23“，8mm/0.31“，10mm/0.39“，12mm/0.47”，14mm/0.55“，16mm/0.62”，18mm/0.7“，20mm/0.78” , 22mm/0.86”，25mm/0.98”， 26mm/1.02“，28mm/1.1“， 30mm/1.18“, 40mm/1.57in, 50mm/2“. Glass cutting drill bit to meet various demands!.
  • 【Wide Usage】Diamond hole saw drill bit set kit removes a complete circle from glass, marble, tiles,granite, ceramic or other., Perfect for drilling glass, porcelain tile, granite, bottles, Wood, Blocks Jars, ceramic marble and and other hard surfaces etc..
  • 【Super Material】Glass drill bit for bottles, are made of industrial grade carbon steel, sharp, fine workmanship and super wear-resistant, Extended service life. Glass cutting drill bit are high quality and good performance that excellent for making clean and accurate hole..
  • 【Tip】Diamond drill bits for ceramic, When you using the diamond hole saw, please use lubrication (water), lubrication will extend drill bits life..
  • SATISFACTION GUARANTEE: Our team is committed to providing every customer with good products a....
Check Stock

Diamond Tile Drill Bits Ceramic Diamond Glass Drill Bit Set 5 Pack 2 Carbide Drill Bits Ceramic Tile Drill Bits 3 Porcelain Granite Drill Bits and Drill Guide for Diamond Tip Drill Bit for Bottles

  • Tungsten Carbide Drill Bit For Ceramic Tile Bits For Drill Holes In Clay Plant Pots For Drainage 3/16″ And 1/4″ Ceramic Drill Bits For Tile . Tungsten Carbide Drill Bits have Self Centering Point for Drilling Holes in Ceramic Tile Marble Travertine and Slate..
  • Diamond Drill Bits For Glass 3/16 In 1/4″ In 1/2 Inch Drill Bit For Glass Drill Set. glass Drill Bit For Bottles Half Inch Glass Drill Bit With Guide For Drilling Hole In Glass Bottles And Glass Blocks For Tree Lights. Keep These Glass Hole Saw Drill Bit For Drilling Glass Cool With Water For Extended Life..
  • For Best Results Use The Diamond Drill Bit For Porcelain And The Spear Point Ceramic Tile Bit To Drill Tile. Use Diamond Bit To Drill Glass And Carbide Tipped Drill Bits With Any Battery or Electric Drill Hole Cutter Bits Must Be Used Wet. Carbide Ceramic Tile Drill Bit Set Can Be Used Dry If No Heat Builds Up..
  • Whilst The Tungsten Tile Cutting Drill Bits Can Be Used As Porcelain Tile Drill Bit The Diamond Tile Drill Bit Will Drill Holes In Porcelain Tile Faster And Last Longer As Long As Diamond Cutting Tip Is Kept Cool. Remove Diamond Tipped Drill Bit From Tile Hole Every 10 To 15 Seconds And Dip Diamond Porcelain Drill Bit Into Cup Of Water, Also Spray Water Into Ceramic Tile Hole To ....
Check Stock

Angle Grinder Attachment M14 Adapter 5/8 inch 11 Female to M14 Male 12,000 RPM Rated Wire Wheel Drill Adaptor Compatible with Dewalt, Makita, Milwaukee, Hitachi, Ryobi Tools

  • Heavy-duty, solid steel, commercial grade adapter for using a European attachment (Metric 14) on North American 5/8"-11 angle grinder, grinder saw, concrete angle grinder. 12,000 RPM rated. Female side is 5/8"-11 and male side is M14 threaded. Mortar rake adapter.
  • M14 side is 0.75 inch long. You can use M14 Threaded Mortar Rake, Diamond Tools, masonry hole saw, drill grinder attachment, polishing rake, polisher attachment, diamond wire saw, hole saw drill attachment with your standard American 5/8" 11 threaded power tools..
  • This wheeler angle grinder drill chuck adapter has a water hole in the center for cooling diamond tools, diamond hole saw, diamond core drill bits..
  • If you have a 5/8"-11 standard North American power tool, this american to european adapter will help you use M14 (metric 14) a female threaded wheel polisher drill attachment, diamond core drill bit, hole drill attachment, angle grinding wheel, angle grinder polisher..
  • Standard small hand polisher can utilize this angle grinder arbor adapter or M14 drill adapter for a polishing spindle, metric hole saw, mortar rake..
Check Stock

Diamond Drill Bits Set, 10 PCS Diamond Hole Saw Set, Glass Drill Bit for Ceramic Tile Porcelain Marble Granite Stone Bottles

  • 【Diamond Drill Bits】These drill bit kits are made of upgraded carbon steel with smooth nickel plating surface to resist corrosion, sharp and durable without edge collapse..
  • 【Premium Quality】Coated with high quality diamond to improve drill efficiency and creates a sharp, high precision and smooth cut..
  • 【Hole Saw Set 10 Sizes】1/4", 5/16", 3/8", 1/2", 9/16", 5/8", 11/16", 4/5", 7/8", 1-1/5"，to meet various drill needs..
  • 【Versatile Uses】Diamond hole saw drill bit set kit are used to drill Glass, Porcelain, Ceramic, Marble, Granite Stone, Bottles, YDPATIOGEMJ, Pots..
  • 【Tips】Please keep adding water when drilling to extend the life.Besides the water lubrication will improve the drilling experience..
Check Stock

Meccion Diamond Drill Bit Brazed Core Hole Saws Performance Hollow Hole Cutter for Glass/Tile/Granite/Marble/Porcelain 6mm-50mm 11pcs Set

  • Professional Diamond Hole Cutter: With Special design of diamond brazed For porcelain, glass, marble, ceramic, rock and granite etc..
  • High Quality Hole Drilling: Made from carbon steel with diamond blade ideal for drilling clean and accurate holes and cut a perfect circles with these tools.
  • Longer Service Life: Heavy duty hole saws gives superior performance, Durability is more than 8X.
  • Tips: Electroplated diamond coating will wear off if the tool gets too hot. Never let your drill bit run dry..
  • Package Include: 6mm (15/64"), 8mm (5/16"), 10mm (25/64"), 12mm (15/32"), 16mm (5/8"), 20mm (25/32"), 22mm (3/4"), 25mm (31/32"), 30mm (1-3/16"), 38mm(1-1/2"), 50mm (1-31/32") diamond hole saw drill bit set of 11 pack.
Check Stock

Diamond Drill Bit Tile Hole Saw Set, 16 PCS Hole Core Drill Hole Saw Kit with Adjustable Hole Saw Guide Jig Fixture and Ultimate Triangle Drill Bits Set for Tile, Ceramic, Glass, Porcelain, Marble

  • Diamond Drill Bit Set Various Sizes - Set include 10 holes saw drill bits+1 hole saw guide clamp+1 screwdriver driver + 4 triangle bit. 10 Sizes Diamond hole saw : 6mm, 8mm, 10mm, 12mm, 20mm, 25mm, 30mm, 35mm, 40mm, 50mm,made of high-strength carbon steel, the integrated steel structure makes these diamond drill bits more durable. Diameter of triangle bit: 6mm, 8mm, 10mm, 12mm..
  • Rustless & Durable: This diamond drill bits are made of high strength Carbon Steel with smooth nickel plating surface. Each diamond hole saw was coated with high quality Diamond to enhance the drilling speed and creates a sharp, high precision and smooth cut with no broken edges In Seconds. Reduced drill speeds, low drill pressure and increased use of water lubrication will extend drill bit life considerably..
  • Adjustable Fixture - Adjustable hole saw drilling guide fixture with suction cup-the maximum opening length of the board is 3-1 / 4 ", which is large enough to fit in all size hole saws. Movable ball bearings, two modes (fixing 3 or 4 bearings) are your choice, just flip the board..
  • The large clearance holes along the drill bit help the entry of cooling water and the escape of chips and other particles from the borehole, ensuring smooth punching and making the drilling pro....
Check Stock

1 1/4 Inch (32mm) Diamond Hole Saw with Pilot Bit, 2 PCS DaduoRi 1.25 Inch Tile Tip Coated Hole Saw with Guiding Drill Bit in The Center for Glass, Porcelain Tile,Ceramics, Marble and Granite

  • 【2 PCS 1-1/4 inches Diameter Hole Saw 】Cutting Hole Diameter: 1-1/4" / 32mm.
  • 【With Spear Shaped Center Pilot Drill Bits, Easy to Get Started 】DaduoRi hole saw with center guiding drill bit make you more easy to locate the center to start drilling on a smooth tile surface. No need to spend time making extra jig guides..
  • 【Triangular Shank Design, Firm Grip by drills】Compared with other hole saws, DaduoRi diamond coated hole saws is designed with a triangular shank, which can better work with the drill..
  • 【Thickened Diamond Coating, More Wear-Resistant 】DaduoRi team attached the importance of diamond tip of the glass drill bit, not only using superior diamonds, but also thickening the diamond coating to make this pilot hole drill bit more wear-resistant and high-temperature resistant..
  • 【Solid Steel Body, no welding deformation 】Made by High-quality 45-gauge steel.The shaft is centered and does not wobble during use..
  • Fast drilling on glass, porcelain tiles, granite, ceramic, quart, flower pot, light stone and fiberglass. Can't use for Metal and Concrete..
Check Stock

Rondarui Diamond Drill Bits Hole Saw Kit Diamond Drill Bit Set Hole Saw for Glass, Marble, Granite Stone, Bottles, Ceramics and Tile 12PCS

  • High Quality: The diamond hole saw cutting blades are made of high quality carbon steel and diamond coating with fine workmanship to provide more efficient performance..
  • High Efficiency & Durability: Thickened emery design with uniform nickel plating. The surface of drill bit set is smooth, the cutting resistance is greatly reduced, the large chip flute is smoother, and the durability and life are long..
  • High Adaptability & Applications: This glass drill bits has an overall length of 2-2.2" (50-55mm), with a universal round drill shank that can accommodate hand drills, cordless drills, bench drills and more..
  • What Will Come: A nice hard plastic box and 12 hole saws of different sizes: 1/4 in (6mm), 5/16 in (8mm), 3/8 in (10mm), 1/2 in (12mm), 9/16 in (14mm), 5/8 in (16mm), 11/16 in (18mm), 3/4 in (20mm), 7/8 in(22mm), 1 in (25mm), 1-1/8 in (30mm), 1-3/8 in (35mm)..
  • Note: Before use, please position it at 45 degrees and then work vertically. And please keep adding water when the diamond hole saw bit is working on glass or ceramics. We give you a lifetime warranty, if you have any questions, please contact us through Amazon..
Check Stock

JINGLING 50mm 2\ inch Diamond Drill Bit Hole Saw for Glass Tile Ceramic

  • Product Name: diamond hole saw, diamond drill bit for tile, hole saw ceramic tile.
  • The diamond coated hole saw suitable for use in drill hole on glass, marble, tile or granite.
  • Use with water as a lubricant, holes require No futher work as cutting is clean.
  • Start drill at 45 degree to surface and align to 90 degree as hole forms.
Check Stock

Rokrou Diamond Drill Bits Diamond Brazed Hole Saw Kit 10PCS Tile Drill Bit with Hole Saw Guide from 6 -50mm /1/4\-2\ for Tile, Drill, Glass, Marble, Granite …

  • 【10 ᴛɪᴍᴇs ʟᴏɴɢᴇʀ ʟɪғᴇ ᴛɪᴍᴇ】Processed with brazing technology, premium level super fine diamond sand is attached to the coated steel body. Our Brazed Hole Saw can last 10 times longer than an ordinary hole saw..
  • 【ᴍᴜʟᴛɪᴘʟᴇ sɪᴢᴇs】The diamond hole saw contains ten different sizes, including 6mm/0.24" 8mm/0.31" 10mm/0.39" 14mm/0.55" 18mm/0.71" 22mm/0.87" 25mm/1" 32mm/1.26" 40mm/1.57" 50mm/1.97"..
  • 【ғᴀsᴛᴇʀ ᴅʀɪʟʟɪɴɢ ᴡɪᴛʜ ʙᴇᴛᴛᴇʀ ᴅʀɪʟʟ】Compared to the ordinary material hole saw, our drill with fine diamond sand can drill holes on hard materials such as tile, drill, glass, marble, granite, much faster..
  • 【ᴅʀɪʟʟ ɢᴜɪᴅᴇ】No need to worry about scratching your tile when drilling the hole. Our Adjustable hole saw drilling guide with a suction cup and 4 bearings will hold the diamond hole saw still during the process. From 6mm to 50mm all the hole saws can fit in this guide..
  • 【ᴛɪᴘs】When the diamond drill bit is working, continuous cooling with water is key to reduce the chance of burning your bit, extending the life of the drill..
Check Stock

Hole Saw Set,15Pcs Diamond Drill Bits with Hole Saw Guide Jig Fixture,Coated Core Drill Bits, Adjustable Hole Saw Centering Locator Suction Holder for Glass,Ceramics,Tile 6-50mm

  • 15 Sizes Diamond hole saw : 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 25mm, 28mm, 30mm, 35mm, 40mm, 50mm,made of high-strength carbon steel, the integrated steel structure makes these diamond drill bits more durable..
  • The diamond hole saws coated with high quality diamond,enhance the drilling speed and creates a sharp, high precision and smooth cut with no broken edges in seconds..
  • Adjustable hole saw drill guide jig fixture with suction base.Plates' maximum opening length is 3-1/4.
Check Stock

JINGLING 175mm 7' inch Diamond Hole Saw Coated Tile Drill Bits for Glass Stone

  • The diamond coated hole saw suitable for use in drill hole on glass, marble, tile or granite.
  • Use with water as a lubricant, holes require No futher work as cutting is clean.
  • Start drill at 45 degree to surface and align to 90 degree as hole forms.
  • Product Name: diamond hole saw, diamond drill bit for tile, hole saw ceramic tile.
Check Stock