Categories

Best Diaphragm Regulator

Cressi Octopus Compact Pro

  • Octopus made in ultra simplified single-hull in ABS + elastomer of really compact size (2.36 in | 6 cm in diameter), extremely light (5.15 oz | 145 g). Its mechanism and development are planned to obtain the minimum number of components and great strength..
  • It's a smart shopping option because of its combination of features - reliability - price - maintenance cost. It's suitable for maximum reliability uses and also as a travel regulator due to its lightness..
  • The specific calibration of the inhalation mechanism changes slightly the personality on air output, rewarding an abundant flow without the need to exploit Venturi effect, beyond the exquisite touch and sensitivity of these kinds of regulators..
  • Exhalation effort reduced without the need to minimize the diaphragm thickness. The restraint system design of the diaphragm guides the flow 100% channelled towards the nozzles of the exhaust tee, that helps to guide bubbles far from the visual field..
  • Practically integral purge pusher, bigger between 80 and 400% than any other regulator in the market to facilitate purge manoeuvre, especially to inexperienced divers..
Check Stock

Uniweld RHP400 Nitrogen Regulator with 0-400 PSI Delivery Pressure, CGA580 Inlet Connection and 1/4-Inch Male Flare Outlet Connection

  • Nitrogen Regulator, Delivery Pressure 0-400 PSI.
  • CGA580 Inlet Connection, 1/4 Inch Male Flare Outlet Connection and Easy to Read 2 Inch Gauges with Protective Rubber Gauge Boots.
  • Durable brass piston designed diaphragm, self re-seating relief valve (not designed to protect downstream system).
  • Large brass Tee Handle with stainless steel pressure adjusting screw and regulator bushing that prevents galling.
  • Regulator can be used with CO2 with the Uniweld part no F36 adaptor, CO2 Cylinder (CGA320) to Nitrogen Regulator (CGA580) (purchased separately).
Check Stock

Uniweld RHP500 Nitrogen Regulator with 0-500 PSI Delivery Pressure CGA580 Inlet Connection and 1/4-Inch Male Flare Outlet Connection

  • Nitrogen Regulator, Delivery Pressure 0-500 PSI.
  • CGA580 Inlet Connection, 1/4 Inch Male Flare Outlet Connection and Easy to Read 2 Inch Gauges with Protective Rubber Gauge Boots.
  • Durable brass piston designed diaphragm, self re-seating relief valve (not designed to protect downstream system).
  • Large brass Tee Handle with stainless steel pressure adjusting screw and regulator bushing that prevents galling.
  • Regulator can be used with CO2 with the Uniweld part no F36 adaptor, CO2 Cylinder (CGA320) to Nitrogen Regulator (CGA580) (purchased separately).
Check Stock

Welding Gas Regulator Valve CO2 Gas Regulator Flowmeter Brass Welding Regulator Valve Brass Flowmeter Gas MIG Welding TIG Welding Equipment

  • 0 to 25LPM Output Flow: The output flow of CO2 gas regulator is adjustable from 0 to 25lpm. and represented by a ball moving up and down in flow tube..
  • Reliable Flowmeter: This flowmeter does not use a diaphragm and therefore more reliable than a flowmeter style regulator..
  • Material: The body material is brass that brass flowmeter has excellent ductility..
  • Application: Welding gas regulator valve is a kind of TIG welding accessory which is perfect for most welders..
  • Parameter: Welding regulator valve output flow range is 0-25LPM, pressure gauge range is 0-3500psi,threaded connection is 5/8in x 18 male connector....
Check Stock

Scubapro MK17 EVO/G260 Diving Regulator System

  • Scubapro’s compact regulator is completely sealed off from the elements to keep out water and pollutants, making it ideal for less-than-pristine waters..
  • With an air-balanced diaphragm first-stage and a chrome-plated brass body, The regulator delivers a constant and effortless airflow unaffected by depth, tank pressure, or breathing rate..
  • Two high-pressure and four high-flow low-pressure.
  • The regulator is designed to resist freezing in extreme conditions thanks to a dry ambient pressure chamber and a metal inlet tube, orifice, inhalation control knob, and hose Connector..
  • Driven to constantly innovate and improve the diving experience, Scuba builds flawless equipment for the work, sport, and lifestyle of people whose passion is found below the surface..
Check Stock

Le Lematec Air Regulator. 1/4' NPT Diaphragm Type In Line Paint Gun Pressure Regulator for Air Compressors. (AR-02)

  • The AR-02 Air Regulator is a true Diaphragm type which delivers your desired and precise air flow from your compressor to all air tools. 0-140 PSI, 1/4" NPT.
  • Great as a Paint Gun Regulator with its' Large Glass Display making it resistant to shop liquids and super easy to read..
  • The Air Pressure Regulator Valve comfortably fits in your hand for quick pressure adjustments so you can focus on the job..
  • The Le Lematec Inline Air Regulator Features Impact Resistant housing to withstand drops, bangs, & accidents..
  • Unlike other Paint Gun Regulators, ours features a lightweight and ergonomic design for installation between your air compressor and air tools allowing for little if any interruption to your air system..
Check Stock

Cressi Aquaride Blue Pro BCD Scuba Gear Package w/ MC9 Compact Regulator & Octo Leonardo C2 Dive Computer w/GupG Reg Bag

  • Cressi Aquaride Pro Buoyancy Control Device with intagrated weights and back weight pockets.
  • Cressi MC9 Compact 1st and 2nd stage regulator with balanced diaphragm and compact Octo.
  • Clearly see every detail of your dive with the Cressi Leonardo C2 Dive Computer console.
  • GupG Regulator bag used to protect your Scuba Diving Regulator and Dive Computer. Great for transporting your reg set..
Check Stock

Honeywell VR8200A2116 Upgraded Replacement for Furnace Gas Valve

  • Gas valves include manual valve, two automatic operators, servo pressure regulator and pilot adjustment.
  • Solenoid-operated first automatic valve opens on thermostat call for heat.
  • Diaphragm-operated second automatic valve opens under control of regulator.
  • closes if gas or power supply is interrupted.
  • All adjustments, wiring connections and pilot outlet are accessible from top of control.
Check Stock

Welding Gas Regulator Valve CO2 Gas Regulator Flowmeter Brass Welding Regulator Valve Brass Flowmeter Gas MIG Welding TIG Welding Equipment

  • 0 to 25LPM Output Flow: The output flow of CO2 gas regulator is adjustable from 0 to 25lpm. and represented by a ball moving up and down in flow tube..
  • Reliable Flowmeter: This flowmeter does not use a diaphragm and therefore more reliable than a flowmeter style regulator..
  • Application: Welding gas regulator valve is a kind of TIG welding accessory which is perfect for most welders..
  • Material: The body material is brass that brass flowmeter has excellent ductility. Can be used with peace of mind.
  • Parameter: Welding regulator valve output flow range is 0-25LPM, pressure gauge range is 0-3500psi,threaded connection is 5/8in x 18 male connector and the air pipe interface is 1/4in..
Check Stock

BETOOLL Nitrogen Regulator with 0-400 PSI Delivery Pressure Equipment Brass Inlet Outlet Connection Gauges

  • CGA580 Inlet Connection, 1/4 Inch Male Flare Outlet Connection and Easy to Read 2 Inch Gauges with Protective Rubber Gauge Boots.
  • Nitrogen Regulator, Delivery Pressure 0-4000 PSI..
  • Durable brass piston designed diaphragm, self re-seating relief valve (not designed to protect downstream system).
  • Large brass Tee Handle with stainless steel pressure adjusting screw and regulator bushing that prevents galling.
Check Stock

Honeywell International VR8200A2132 Valve

  • Includes: One 1/2″ x 3/8″ straight busing, one 3/4″ straighr flange, one hex wrench, one pilot compressing fitting for 1/4″ O.D. tubing, 393691 Natural to LP gas conversion kit.
  • Gas valves include manual valve, two automatic operators, servo pressure regulator and pilot adjustment.
  • Solenoid-operated first automatic valve opens on thermostat call for heat.
  • Diaphragm-operated second automatic valve opens under control of regulator.
  • closes if gas or power supply is interrupted.
Check Stock

Goplus Compressed Air Filter Regulator Combo, 3/8" NPT Air Filter Pressure Regulator Gauge Kit Water Separator w/Pressure Gauge, 150PSI

  • This air pressure regulator is made of nylon, PC and cast aluminum, durable and not easy to get rusty. The maximum air pressure can reach up to 1.0MPa/ 150PSI..
  • This pressure regulating filter allows the precise control and the delivery of clean, dry air. Internal diaphragm design smoothes and regulates the airflow, which also minimizes the negative effects of air pulsations and pressure imbalances created by piston-style compressors..
  • With the adjustable pressure control knob, you can pull up and turn the black knob at the top of the regulator to set desired pressure. It will make your work more accurately and our air pressure regulator is definitely the right choice for you..
  • This air pressure regulator is compact and also combines the functions of both air filter and regulator. It is compact and most effective when space is constrained..
  • There is a clear dial plate on the tool and it comes with a clear introduction, which makes the Pressure regulating filter very easy to read and use..
Check Stock

Uniweld Products RHP1500 Uni-Weld Nitrogen Regulator 1/4 Fnpt

  • CGA580 Inlet Connection, 1/4 Inch Male Flare Outlet Connection and Easy to Read 2 Inch Gauges with Protective Rubber Gauge Boots.
  • Nitrogen Regulator, Delivery Pressure 0-400 PSI.
  • Durable brass piston designed diaphragm, self re-seating relief valve (not designed to protect downstream system).
  • Large brass Tee Handle with stainless steel pressure adjusting screw and regulator bushing that prevents galling.
Check Stock