Best Diesel Fuel Injection Pump
6.5L Turbo Diesel PMD Fuel Pump Driver Module for 1994-2002 Chevy GMC, FSD 19209057 12562836
- PMD Module Fitment - 6.5L fuel pump module driver, PMD, FSD for all 1994-2002 Chevrolet GMC 6.5 liter diesel engines, all detroit diesel engines.
- Replace # - This 6.5l turbo diesel injection fuel pump drive module replace 12562836, 1929057.
- Features - This 6.5l pump mounted driver PMD FSD, which can directly replace damaged or malfunctioning modules. It is installed on the diesel injection pump to help control the operation of the pump. Maintains proper fuel pressure over the full operating range of the engine. The fuel injector fuel pump drive worked as expected, noted the improvement in the engine performance immediately..
- Installation - To install a new 6.5L PMD, the fuel injection pump must be tested for current. Worn fuel pumps burn them on the PMD. In most cases, the main cause of the failure is the exhaustion of the fuel pump. We also sell PMD relocation kits that can be installed in the engine compartment cooler section. Keep in mind that repositioning does not solve the fuel pump failure, it actually increases the resistance of the circuit and may fail more quickly through the length.
- Service - We offer 6.5l pump mounted driver PMD 90-days shelf life, hassle-free return and money back policy, buy with confidence! If you have any questions ab....
Check StockOTC 6080 Fuel Injection Test Kit for Master Cummins Diesel Engine
- Includes the fittings and gauge needed to check fuel pressure fuel volume and fuel restrictions from the delivery pump to the injection pump.
- Kit includes special quick-disconnect banjo fitting two fuel injection quick-coupler adapters quick-disconnect banjo fitting gauge assembly and fuel volume test adapter.
- Also includes a diesel fuel inlet restriction test adapter for 1988-98 Dodge pickups and vans with 5.9L 12-valve and 1998-1/2-newer 5.9L 24-valve Cummins diesel engines.
Check StockViewer Questions: Fuel System Requirements When Converting From Gas to Diesel
- 【Accurate Fuel Injection】Air-cooled diesel engine four-stroke single cylinder adopts direct injection fuel system with good atomization to achieve accurate fuel injection and save fuel for you. Commodity parameters:Crankshaft: Horizontal,Size: 13.2 * 14.96 * 16.3 inches,Net weight : 59.5 lb,Material: aluminum alloy box,System: direct injection fuel system,Rated power: 3.6kw,Displacement (L): 0.247,Fuel tank volume (L): 2.5,Engine speed: 3600r / min..
- 【Speed Control Handle】Diesel motor engine can be positioned at any speed, equipped with throttle cable mount, you can install the throttle cable as needed..
- 【Fast Heat Dissipation】4 Stroke single cylinder air cooled vertical engine has an air-cooled diesel engine made of aluminum alloy with reinforced and thickened treatment, which makes it have good heat dissipation and protect the machine..
- 【Small Space Occupation】Tiller crude oil engine has compact structure and small size, occupying less space than other engines..
- 【Wide Range of Application】Heavy duty single cylinder air- cooled diesel motor engine is suitable f....
Check StockZJERYL GULL TU-114 Auto Fuel Pressure Gauge Tester Kit Gasoline Pressure MetersAutomobile Instrument Testing Tool(Red)
- 1: Universal design with the accompanying adapter. hoses and adaptationtings cover all fuel injection systems and most cars and vehicles. Not for diesel high pressure injection pumps or direct injection engines.
- 2: Mechanical ideal: fuel injection pump pressure / fuel injection pressure gauge testing, main sealing performance / accurate reading.
- Fuel Pressure Tester (0-140 PSI) with good sealing performance and quality materials (metal、rubber、plastic.) provides you with an accurate reading and long lasting product..
- 3: 114 Fuel Pressure Gauge Tool Kit connection.
- Connect the pressure gauge directly to the standard schrader / M6 / M8 / M10 / M12 / M14 fuel pressure test port of the fuel pump using special parts and hoses. Insert the "T" part in series between the pump and engine..
- 4:This fuel injection pump detector is a professional fuel injection system compression detection tool, these readings will help to diagnose the inlet / outlet side components have kink / leak / jam detection or fuel pressure regulator, tank pressure is low. Gasoline is flammable. Make sure there is no open flame nearby and it is operated by a professional..
- 100% Satisfaction: We are responsible for every product. If you have any problems with our products or services, ple....
Check StockJIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-100PSI, Universal for Auto Truck SUV Motorcycle ATV RV
- FITMENT TYPE FOR JIFETOR FUEL INJECTION GAUGE: The car fuel pressure diagnostic test kit is suitable for most vehicles with gasoline/gas engine fuel injection pump system (except for Bosch, CIS Jetronic, Throttle Body Systems on GM vehicles), not for diesel high pressure injection pump or high pressure fuel track on direct-injection engine, due to the fuel gauge's low pressure range. Test fuel pressure is an essential part of the troubleshooting process of fuel injection system..
- 3 CONNECTION TYPES FOR TU-113 FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 14"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 11"L hose for the small Schrader valve (for some Ford), and 8"L hose for M6 fuel pressure test port. 1/4" barbed brass fittings is direct for special test outlet on engine, and aluminum tee splices in-line between the fuel pump and engine for most vehicles..
- PRIMARY FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 2-3/4" large dial with 0-100psi/0-7bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. Pleas....
Check StockJIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-140PSI, Universal for Auto Truck SUV Motorcycle ATV RV
- FITMENT TYPE FOR JIFETOR FUEL PRESSURE GAUGE KIT: The car fuel pressure tester kit is suitable for most vehicles with gasoline/gas engine fuel injection pump system (except for Bosch, CIS Jetronic, Throttle Body Systems on GM vehicles), not for diesel high pressure injection pump or direct-injection engine, due to the fuel gauge's low pressure range. Testing fuel pressure is an essential part of the troubleshooting process of fuel injection system..
- CONNECTIONS FOR TU-114 FUEL PRESSURE GAUGE TOOL KIT: The fuel pressure test gauge set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up directly to the 1/4" SAE standard schrader valve on fuel pump, 8"L hose for M6 fuel pressure test port, and there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail. The aluminum tee help to splice in-line between the fuel pump and engine for most vehicles..
- FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 3-1/2" large dial with 0-140psi/0-10bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. The pressure relief valve and 16"L fuel drain hose help to re....
Check StockYSTOOL Fuel Pressure Tester Gauge Kit 140PSI Automotive Engine Injector Pump Test Gasoline Gas Injection Manometer Tool Set with Inline Fitting Schrader Adapter for Auto Car Motorcycle (Blue Case)
- The fuel injector tester kit is designed to identify and diagnose malfunctions in fuel supply & injection systems and help find possible causes. Suitable for most fuel injection systems in gasoline vehicles such as cars, trucks and ATVs. Incompatible with Bosch, CIS-Jetronic, or GM throttle body systems because of no suitable connection adapters. Also not fit diesel high pressure injection pump or high pressure fuel track on direct-injection engine due to the test range: 0-140psi /0-10 bar.
- Gas fuel pressure tester gauge kit equips with various fittings and hoses for test, and supports two assembly forms. One is to connect pressure gauge directly to fuel pump's standard Schrader / M6 / M8 / M10 / M12 / M14 fuel pressure test port with 15" / 8" hose and M8 / M10 / M12 / M14 adapters. The other is to measure by fitting the T-type joint between the fuel pump and engine. Please note: no small Schrader connector in this fuel presure test kit to perform service for some Ford models..
- Accurate fuel pressure gauge has a 3-1/2" big color-coded dial with shockproof rubber cover. 15"L hose can attach to the 1/4" SAE standard Schrader valve on fuel pump or fuel rail directly. The built-in translucent fuel discharge hose and pressure release valve work for safe pre....
Check StockFuel Pressure Gauge Kit,0-140 PSI Fuel Pump Tester,Fuel Injection Pressure Tester Updated TU-114 Fuel Pressure Tester Kit Gas Oil Pressure Tools Gasoline Tester Tool
- ...and corrosion.Durable plastic blow-molded case to protect components and provide easy transport and organization,Items are protected well in a sturdy case..
- 【REGULAR CHECK FUEL INJECTOR PUMP PRESSURE】 High or low fuel pressure can cause many engine problems.It is mainly used to test whether the fuel supply and injection system are working normally, and to determine whether the internal components are damaged or the oil circuit is faulty. You can troubleshoot possible problems based on the vehicle manufacturer's user manual..
- 【AFTER-SALES SERVICE】Package Included: 1x Fuel Injection Pressure Tester, As Picture Shows.Enclosed with an instruction manual.Note: Not for diesel high pressure injection pump or direct-injection engine.Buy with confidence, We provide 6 months warranty service, if you have any questions, please feel free to contact us via email.We will solve it for you as soon as possible..
Check StockJIFETOR Fuel Injection Pump Pressure Test Gauge Set, Automotive Gas Gasoline Fuel Oil Injector Tester Tool Kit 0-140PSI, with Schrader Adapters Universal Compatible with Ford Auto Car Truck Motorcycle
- FUEL PRESSURE GAUGE TESTER: Automotive fuel injector tester tests if the fuel supply & injection system work normally, help to judge if there are broken internal components or faulty oil lines. Specific tool for fuel system detecting and troubleshooting. Fuel pressure gauge kit suits a variety of gasoline engines on car, truck, SUV, Motorcycle, ATV, RV, etc (Bosch, CIS Jetronic, Throttle Body System on GM vehicles excluded), not for diesel high pressure injection pump or direct-injection engine.
- UPGRADED FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 5-1/2"L hose for small Schrader valve (compatible with some Ford), and 8"L hose for M6 fuel pressure test port, and there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail. The aluminum tee can splice in-line between the fuel pump and engine for most vehicles.
- 140PSI/10BAR PRECISION-MACHINED FUEL PUMP TESTER GAUGE: You just need to ensure there is an adapter in the kit suitable for your test port or the inline connection is workable for your car. Pressure gauge adopts rubber cover protected 3-1/2" large dial and dual color cod....
Check StockDiesel Lift Pump Kit For 6.6L 12V Duramax Diesel 165GPH Lift Pump Filter Fit For Chevy GMC Duramax 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 - TSC10165G
- ...:TSC10165G Fuel Lift Pump Upgraded Version Is Made Of High Quality Metal And Rubber Materials, More Flexible And Wear-Resistant, High-Temperature Resistant, Corrosion Resistance, 2 Micron Filtration Rating, Effectively Removes Water, Air And Debris From Diesel Fuel.Improve Fuel Economy, Increase Injector And Fuel Injection Pump Life, And Increase Engine Torque Output. Either For Immediate Use Or As A Spare, Are A Better Replacement, Ready To Replace, Can Be Replaced With The Existing Hardware Integration Perfectly Matched To Give You Long-Term Stability And Good Performance.
- ✔【Compatible With】: Fit For 2001-2010 Chevy Duramax 2001-20106.6L 12V | 2001-2010 GMC Duramax 6.6L 12V.
- ✔【Replacement Part Number & Cost Effective】: TSC10165G.
- ✔【Our Warranty】: Package Includes Diesel Fuel Electric Lift Pump Set ,Lifetime Warranty. If The Part Fails Or Breaks, Please Contact Us For Replacement. Save Hundreds Of Dollars Off Of Dealer Prices By Purchasing This Part And Taking Advantage Of Our Warranty.Price Concessions And Guaranteed, No Need ....
Check StockCarBole External In Line Fuel Pump: 116 PSI High Pressure Unversal 12V Electric Pump Injection Systems Replacement for 0580464070 With Mounting Bracket Clamp (Red)
- 100% brand new and high quality. Universal external in line fuel pump. Does not need to be mounted inside the tank.
- Operation Pressure: 5-8bar (72.5-116 psi).
- Flow Rate-120LPH at 6.0bar (about 31.7GPH at 87PSI).
- Flow Rate-100LPH at 7.0bar (26.4GPH at 101.5psi).
- Replaces 0580464070 and others but not OEM. Great for use with Mega Squirt and other aftermarket systems.
- This pump is used for turbo/non turbo gas fuel injection systems up to 250bhp.
- this is a universal fit pump and depending on your application some adapting will be required, installation may require skill and knowledge, no instructions are included.
- Adopted Fuel Injection Molding Technology to upgrade the plastic parts of the product, which makes the fuel pump more durable, corrosion resistance and improve the service life of the pump.
- Package including: 1pc high flow external fuel pump, 1pc Mounting Clamp, 2pcs rubber connection covers, 2pcs insulated terminals, 2pcs nuts, 2pcs gasket, 1pc bolt for bracket.
- NOTE: It can only be used for gasoline and diesel, and CAN NOT be used for fuel containing methanol or ethanol, nor is it suitable for pumping water or oil..
Check Stock100 GPH Lift Pump Filter 6.6L Diesel Compatible with Chevy/GMC Duramax 2001-2010 6.6L Diesel Engines A4SPBC085
- AFTER SALES - Our products provide 3 years free replacement and lifetime warranty service, you can contact us at any time..
- FUNCTION - Lift pump filters offer effective technology specifically designed to remove water, particulates, vapors and entrained air from truck diesel fuel. Improve fuel economy, increase injector and fuel injection pump life, and increase engine torque output..
- QUALITY -The products are made of high-quality materials and undergo strict quality inspection before leaving the factory. Make sure that every high-quality Lift Pump Filter is delivered to you with complete accessories..
- PACKAGE - The packaging is as shown in the picture, we have carefully inspected it before delivery, and you can buy it with confidence..
- COMPATIBLE - 100 GPH Lift Pump Filter Compatible with Chevy/GMC Duramax 2001-2010 6.6L Diesel Engines A4SPBC085.
Check StockLichamp Fuel Pressure Gauge, Fuel Pump Pressure Test Kit with Pressure Tester Adapter and Hose, B1BK
- FUEL PRESSURE TESTER - Automotive fuel injector tester kit tests fuel supply & injection system problems, help to judge if there are broken internal components or faulty oil lines..
- WIDE COMPATIBILITY - Suitable for most gasoline engines on car, truck, SUV, motorcycle, ATV, RV. NOT FOR diesel high pressure injection pump or direct-injection engine, INCOMPATIBLE WITH EFI, CIS or TBI System, INCOMPATIBLE WITH Ford 1/4" Small Schrader Fitting.
- UP TO 140PSI / 10BAR - Provide with dual scale accurate readings 0-140psi (0-10 bar), easy to read and provide you more precise and accurate readings.
- ALL IN ONE SET - Equipped with various adapters and hoses to connect for testing, great for 1/4" standard Schrader valve and M6/M8/M10/M12/M14 service port. The aluminum tee can splice in-line between the fuel pump and engine for most vehicles..
- LONG LASTING MATERIALS - Designed for repeated use with high quality materials (Brass, Steel, Rubber, Plastic), rugged and long-lasting. Excellent air-tightness and avoid any leaking.
Check Stock