Categories

Best Diesel Injection Part

NOLANTISI Diesel Engine, 196CC Single Cylinder Air Cooling Diesel Engine Recoil Start System for Small Tiller Walking Tractor Transport Vehicle Irrigation & Drainage Machine

  • 【SELF-INJECTION DIESEL SYSTEM】196CC Diesel Engine, equipped with elf-injection diesel system, good atomization, low oil consumption, more punctual diesel injection, and long service life. Compact structure, small size and light weight. Compared with gasoline engines, it is more economical and lighter than vertical diesel engines..
  • 【GOOD COOLING PERFORMANCE】Enhanced thickening alloy box, fast heat dissipation, low oil temperature, light weight. Through advanced software analysis and optimized design, the reliability of the diesel engine in terms of structure and cooling is ensured..
  • 【SUPERIOR DIESEL SYSTEM】Large capacity diesel tank, enhanced thickening, large diesel tank volume, special painting process, seam welding, and oil leakage. Optimize the diesel system and intake and exhaust systems to save energy and diesel..
  • 【 APPLICATION 】It is widely used in small agricultural machinery, such as micro-tiller, pastoral management machine, irrigation, and drainage machine, generator set, small transport vehicle, small walking tractor, and other fields..
Check Stock

Diesel Engine, 3HP 196CC 4-Stroke Single Cylinder Air Cooled Diesel Motor, Manual Recoil Start Horizontal Shaft Engine for Go Kart, Lawn Mower, Power Generator, Wood Splitter

  • 【SELF-INJECTION DIESEL SYSTEM】4 Stroke 196CC GDNTMU Diesel Engine, equipped with elf-injection diesel system, good atomization, low oil consumption, more punctual diesel injection, and long service life. Compact structure, small size and light weight. Compared with gasoline engines, it is more economical and lighter than vertical diesel engines..
  • 【MAIN PARAMETERS】Shell material: Aluminum, Displacement: 196CC, Speed: 3000 RPM, Maximum output: 2.2KW, Number of cylinders: Single Cylinder, Engine cooling method: Air Cooling, Start method: Manual Start, Starting system: Hand Recoil, Ignition method: Compression Ignition, Compression ratio: 22:1, Diesel: #0 diesel, Diesel consumption rate: 0.7 lb/kw.h, Diesel tank capacity: 100 fl oz, Engine oil capacity: 24 fl oz, Net torque: 8Nm / 2880rpm..
  • 【GOOD COOLING PERFORMANCE】Enhanced thickening alloy box, fast heat dissipation, low oil temperature, light weight. Through advanced software analysis and optimized design, the reliability of the diesel engine in terms of structure and cooling is ensured..
  • 【SUPERIOR DIESEL SYSTEM】Large capacity diesel tank, enhanced thickening....
Check Stock

Diesel Engine 196CC 4 Stroke Single Cylinder Forced Air Cooling Horizontal Axis Engine Recoil Hand Start 3000RPM 2.2KW, 53mm Shaft Length (Orange)

  • 【SELF-INJECTION DIESEL SYSTEM】4 Stroke 196CC Diesel Engine, equipped with elf-injection diesel system, good atomization, low oil consumption, more punctual diesel injection, and long service life. Compact structure, small size and light weight. Compared with gasoline engines, it is more economical and lighter than vertical diesel engines..
  • 【GOOD COOLING PERFORMANCE】Enhanced thickening alloy box, fast heat dissipation, low oil temperature, light weight. Through advanced software analysis and optimized design, the reliability of the diesel engine in terms of structure and cooling is ensured..
  • 【SUPERIOR DIESEL SYSTEM】Large capacity diesel tank, enhanced thickening, large diesel tank volume, special painting process, seam welding, and oil leakage. Optimize the diesel system and intake and exhaust systems to save energy and diesel..
  • 【MAIN PARAMETERS 1】Model: 168F, Shell material: Aluminum, Displacement: 196CC, Speed: 3000 RPM, Maximum output: 2.2KW, Number of cylinders: Single Cylinder, Engine cooling method: Air Cooling, Start method: Manual Start, Starting system: Hand Recoil, Ignition method: Compression Ignit....
Check Stock

Diesel Engine 247CC 4 Stroke 5HP Single Cylinder Air Cooling Vertical Engine Motor Hand Start Direct Injection 3.6KW (Black, 173FA)

  • 【HIGH PERFORMANCE DIESEL ENGINE】247CC 4 Stroke Diesel Engine, equipped with self-injection diesel system, good atomization, low diesel consumption, more punctual diesel injection, and long service life. Widely Applicable for road cutting machine, grinding machine, water pump, micro tiller, air conditioning compressor, micro tiller, etc..
  • 【RELIABLE COOLING DESIGN】Strengthen thickening aluminum alloy box, fast heat dissipation, low oil temperature, light weight. Through advanced software analysis and optimized design, the reliability of the diesel engine in terms of structure and cooling is ensured..
  • 【EASILY SPEED CONTROL】Comes with a speed control handle, it can be positioned at any speed, equipped with throttle cable mounting seat, and can install throttle cable according to needs. Compact structure, small size and light weight. Compared with gasoline engines, it is more economical and lighter..
  • 【SUPERIOR DIESEL SYSTEM】Large capacity diesel tank, enhanced thickening, large diesel tank volume, special painting process, seam welding, and oil leakage. Optimize the diesel system and intake and exhaust systems to save energy and diesel..
  • 【MAIN PARAMETERS】Displacement: 247CC, Rated power: 3.6KW, Engine speed: 3600 RPM, Cooling mode: Air coo....
Check Stock

GaofeiLTF 6.0 Fuel Injection Pressure Regulator Valve & Sensor IPR & ICP for 2003-2010 Ford F250 F350 F450 E350 E450 6.0L Powerstroke Diesel Excursion

  • IPR & ICP - 6.0L Powerstroke IPR Valve / ICP Sensor Kit work together as part of a feedback cycle to control the oil pressure to the injectors in the high-pressure fuel system.
  • COMPATIBLE PART NUMBER - CM-5126, 5C3Z-9C968-CA, 5C349C968CA, 1846057C1, AP63417, W3250216, HTV102, CM-5054.
  • FITMENT - 2004-2010 Ford E-350 E-450 6.0L V8 Diesel Turbocharged.
  • 2003-2010 Excursion 6.0L V8 Diesel Turbocharged.
  • 2003-2010 F-250 F-350 F-450 F-550 Super Duty 6.0L V8 Diesel Turbocharged..
  • PACKAGE INCLUDES: 1x Fuel Pressure Regulator ( IPR ).
  • 1x Diesel Injection Control Pressure Sensor ( ICP ).
  • 24H CUSTOMER SERVICE - If you have any problems, do not hesitate to contact us, we’d love to provide a replacement or a refund..
Check Stock

Viewer Questions: Fuel System Requirements When Converting From Gas to Diesel

  • 【Accurate Fuel Injection】Air-cooled diesel engine four-stroke single cylinder adopts direct injection fuel system with good atomization to achieve accurate fuel injection and save fuel for you. Commodity parameters:Crankshaft: Horizontal,Size: 13.2 * 14.96 * 16.3 inches,Net weight : 59.5 lb,Material: aluminum alloy box,System: direct injection fuel system,Rated power: 3.6kw,Displacement (L): 0.247,Fuel tank volume (L): 2.5,Engine speed: 3600r / min..
  • 【Speed Control Handle】Diesel motor engine can be positioned at any speed, equipped with throttle cable mount, you can install the throttle cable as needed..
  • 【Fast Heat Dissipation】4 Stroke single cylinder air cooled vertical engine has an air-cooled diesel engine made of aluminum alloy with reinforced and thickened treatment, which makes it have good heat dissipation and protect the machine..
  • 【Small Space Occupation】Tiller crude oil engine has compact structure and small size, occupying less space than other engines..
  • 【Wide Range of Application】Heavy duty single cylinder air- cooled diesel motor engine is suitable f....
Check Stock

FICM Engine Fuel Injector Complete Wire Harness - Replaces Part 5C3Z9D930A, 5C3Z-9D930-A - Compatible with Ford Vehicles F250 F350 F450 F550 - Powerstroke 6.0L Diesel - 2003-2007

  • Replacement Fuel Injector Control Module (FICM) Harness - This wire harness connects the fuel injectors on your 6.0 Powerstroke diesel engine to the FICM module. This is a complete wire harness with all connectors. If your truck is experiencing injection fault codes, idling or running rough your factory wiring may have a short or loose connection. Replace it and get you 6.0 Powerstroke running right..
  • Compatible Replacement for Ford Vehicles - 2003, 2004, 2005, 2006, 2007 F250, F350, F450, F550 and Excursion with the 6.0 Powerstroke Diesel engine. Including model years 03, 04, 05, 06, 07..
  • Replaces Part# - Replaces part number 5C3Z9D930A and 5C3Z-9D930-A - While this is a not a genuine OEM part, it is a direct replacement for the factory FICM injector wiring harness found on your F250, F350, F450, F550, or Excursion. Powerstroke 6.0 diesel Super Duty..
  • OEM Fit, Quality, Finish - This FICM wiring harness features OEM connections for a perfect connection to the FICM and the diesel fuel injectors. High temperature wires are used throughout to insure longevity. The entire wire harness features a high temperature wire loom to product both the harness and pigtails from the heat in your F250, F350, F450, F550, or Excursion's engine bay..
Check Stock

Michigan Motorsports Rack Cap Fitment for 1994 thru 1998 Dodge Cummins, Fits all P7100 injection pumps 2500 3500

  • Rack Cap for 1994-1998.5 Dodge Cummins Diesel & Bosch P7100 Pump,.
  • The Billet Rack Cap allows full rack travel of the P7100 injection pump. This Rack Cap is drilled deeper than the stock rack cap to provide more rack travel. By allowing 4mm more travel, the horsepower gain will be impressive!.
  • Fits ‘94-‘98.5 Dodge Cummins and all P7100 injection pumps.
  • Replaces: Bosch part 2095 and Bosch part #2423462000.
  • Made of the highest quality materials available..
Check Stock

4c3z9f838a 1845428C92 2004-2006 f250 f350Fuel injection pressure sensor Replacement for ford 6.0 powerstroke icp sensor

  • Manufacturer Part Number:1845428C92£¬4C3Z-9F838-A.
  • OEM Number Part: 4C3Z9F838A£¬5C3Z-9C968-CA£¬5C3Z9C968CA.
  • Replaces #:1845428C92, 4C3Z9F838AB, 3PP6-12,Easy to install, no installation instruction included.
  • Fuel Injector Injection Pressure Sensor Compaitble With 2004-2010 International Trucks With 6.0L Diesel Engine Replaces Ford 4C3Z9F838A, 1845428C92, AP63460, ICP101.
  • Package Content: 1 PCS 1845428C92 Fuel Injection Pressure Sensor.
Check Stock

ZJERYL GULL TU-114 Auto Fuel Pressure Gauge Tester Kit Gasoline Pressure MetersAutomobile Instrument Testing Tool(Red)

  • 1: Universal design with the accompanying adapter. hoses and adaptationtings cover all fuel injection systems and most cars and vehicles. Not for diesel high pressure injection pumps or direct injection engines.
  • 2: Mechanical ideal: fuel injection pump pressure / fuel injection pressure gauge testing, main sealing performance / accurate reading.
  • Fuel Pressure Tester (0-140 PSI) with good sealing performance and quality materials (metal、rubber、plastic.) provides you with an accurate reading and long lasting product..
  • 3: 114 Fuel Pressure Gauge Tool Kit connection.
  • Connect the pressure gauge directly to the standard schrader / M6 / M8 / M10 / M12 / M14 fuel pressure test port of the fuel pump using special parts and hoses. Insert the "T" part in series between the pump and engine..
  • 4：This fuel injection pump detector is a professional fuel injection system compression detection tool, these readings will help to diagnose the inlet / outlet side components have kink / leak / jam detection or fuel pressure regulator, tank pressure is low. Gasoline is flammable. Make sure there is no open flame nearby and it is operated by a professional..
  • 100% Satisfaction: We are responsible for every product. If you have any problems with our products or services, ple....
Check Stock

6.5L Turbo Diesel PMD Fuel Pump Driver Module for 1994-2002 Chevy GMC, FSD 19209057 12562836

  • PMD Module Fitment - 6.5L fuel pump module driver, PMD, FSD for all 1994-2002 Chevrolet GMC 6.5 liter diesel engines, all detroit diesel engines.
  • Replace # - This 6.5l turbo diesel injection fuel pump drive module replace 12562836, 1929057.
  • Features - This 6.5l pump mounted driver PMD FSD, which can directly replace damaged or malfunctioning modules. It is installed on the diesel injection pump to help control the operation of the pump. Maintains proper fuel pressure over the full operating range of the engine. The fuel injector fuel pump drive worked as expected, noted the improvement in the engine performance immediately..
  • Installation - To install a new 6.5L PMD, the fuel injection pump must be tested for current. Worn fuel pumps burn them on the PMD. In most cases, the main cause of the failure is the exhaustion of the fuel pump. We also sell PMD relocation kits that can be installed in the engine compartment cooler section. Keep in mind that repositioning does not solve the fuel pump failure, it actually increases the resistance of the circuit and may fail more quickly through the length.
  • Service - We offer 6.5l pump mounted driver PMD 90-days shelf life, hassle-free return and money back policy, buy with confidence! If you have any questions ab....
Check Stock

FICM Engine Fuel Injector Complete Wire Harness - 5C3Z9D930A - Compatible with for Ford Powerstroke 6.0L Diesel 2003 2004 2005 2006 2007 F250 F350 F450 F550 Excursion -Black

  • [REPLACEMENT FUEL INJECTOR CONTROL MODULE (FICM) HARNESS ] - This wire harness connects the fuel injectors on your 6.0 Powerstroke diesel engine to....
  • [EXCELLENT FUNCTION OF THIS HARNESS] - This is a complete wire harness with all connectors. If your truck is experiencing injection fault codes,....
  • [FITS THE FOLLOWING VEHICLES] -This wire harness fits for Including model years 03, 04, 05, 06, 07..
  • [REPLACES PART NUMBER #] - Replaces part number 5C3Z9D930A and 5C3Z-9D930-A. While this is a not a genuine part, it is a direct replacement for the....
  • [VEHICLE TYPE COMPATIBILITY] - Fuel Injector Jumper Wiring Harness fits for Powerstroke Diesel FICM..
Check Stock

Diesel Lift Pump Kit For 6.6L 12V Duramax Diesel 165GPH Lift Pump Filter Fit For Chevy GMC Duramax 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 - TSC10165G

  • ...:TSC10165G Fuel Lift Pump Upgraded Version Is Made Of High Quality Metal And Rubber Materials, More Flexible And Wear-Resistant, High-Temperature Resistant, Corrosion Resistance, 2 Micron Filtration Rating, Effectively Removes Water, Air And Debris From Diesel Fuel.Improve Fuel Economy, Increase Injector And Fuel Injection Pump Life, And Increase Engine Torque Output. Either For Immediate Use Or As A Spare, Are A Better Replacement, Ready To Replace, Can Be Replaced With The Existing Hardware Integration Perfectly Matched To Give You Long-Term Stability And Good Performance.
  • ✔【Compatible With】: Fit For 2001-2010 Chevy Duramax 2001-20106.6L 12V | 2001-2010 GMC Duramax 6.6L 12V.
  • ✔【Replacement Part Number & Cost Effective】: TSC10165G.
  • ✔【Our Warranty】: Package Includes Diesel Fuel Electric Lift Pump Set ，Lifetime Warranty. If The Part Fails Or Breaks, Please Contact Us For Replacement. Save Hundreds Of Dollars Off Of Dealer Prices By Purchasing This Part And Taking Advantage Of Our Warranty.Price Concessions And Guaranteed, No Need ....
Check Stock