Categories

Best Differential Carrier

Spicer Rear Axle Bearing and Seal Kit For 1997-06 Jeep TJ/w Dana 44 Both Sides

  • replacement carrier shim kit for dana spicer 44 differential, 30 spline axles.
  • Precision Machined for Specific Applications.
Check Stock

SparkFun MicroMod Artemis Processor - Modular Interface Ecosystem That Connects Artemis microcontroller/Processor Board to Various/Carrier Board peripherals

  • Artemis General Features: 1M Flash / 384k RAM, 48MHz / 96MHz turbo available, 6uA/MHz (operates less than 5mW at full operation), 48 GPIO - all interrupt capable, 31 PWM channels, Built in BLE radio and antenna.
  • Additional Artemis Features: 10 ADC channels with 14-bit precision with up to 2.67, million samples per second effective continuous, multi-slot sampling rate.
  • Additional Artemis Features: 2 channel differential ADC, 2 UARTs, 6 I2C buses, 6 SPI buses, 2/4/8-bit SPI bus, PDM interface, I2S Interface, Secure 'Smart Card' interface, FCC/IC/CE Certified (ID Number 2ASW8-ART3MIS).
  • Specific Peripherals made available on MicroMod Artemis: 1x USB dedicated for programming and debug, 1x UART with flow control, 2x I2C, 1x SPI, 1x Quad-SPI, 8x Fast GPIO, 2x Digital Pins, 2x Analog Pins, 2x PWM, 1x Differential ADC pair, Status LED, VIN Level ADC.
  • Additional peripherals are available but are shared on dedicated MicroMod pins. Processor board only, additional carrier board(s) will be needed to use..
Check Stock

Yukon Gear & Axle YHCC-D44 Black Hardcore Differential Cover

  • EASY DROp-IN INSTALLATION: Replaces your spider gears. No crazy diff work required. Average installation time is 4 hours..Material:steel.
  • HIGH STRENGTH STEEL: Made from 9310 steel for incredible durability and longevity..
  • QUALITY: Heat treated and precision cut teeth ensure long life and performance..
  • FITMENT: Fits the Dana 30 differential, 27 spline. If purchasing this unit for a Non-Rubicon JK front, you will also need to purchase carrier case part number YC D706008.
Check Stock

Taidacent THS4131 Fully Differential Input/Output Low Noise Amplifier Module Single Ended to Differential Single Ended Input Double Ended Output

  • Name: THS4131 Fully Differential Amplifier Size: 45mm X 34mm Supply Voltage Range: 5V Single Supply ±15V Dual Supply.
  • This module can implement single-ended to differential, single-ended input, and double-ended output. Has high performance, low noise, wide power supply voltage range and other advantages..
  • The THS413x consists of a true fully differential signal path from input to output. This design produced excellent common-mode noise suppression wells that improved total harmonic distortion..
  • Chip features High performance 150 MHz - 3 dB bandwidth (VCC = ±15V) 51V/us slew rate -100dB third harmonic distortion (250kHz) 2. Low noise 1.3 nV/vHz Input Reference Noise Differential input/cent output Balanced Output Suppresses Common Mode Noise Reduce second harmonic distortion from dry differential output.
  • Wide supply voltage range VCC-5 V Single Supply to ±15V Dual Supply ICC (SD) = 860 u A Shutdown Mode (THS4130) Chip application Single-ended to differential conversion Differential ADC Driver Differential antialiasing Differential transmitters and receivers Output Level Translator.
Check Stock

Taidacent AD8130 Differential Receiver Amplifier Module Differential to Single-ended High Common-mode Rejection Ratio Low Noise Low Distortion

  • Name: AD8130 Differential Amplifier Size: 43mm X 38mm Supply voltage range: ±5V~±12V.
  • The differential-to-single-ended amplifier, which has a 270-MHz bandwidth and a very high common-mode rejection ratio (CMRR) at high frequencies, can also be effectively used as a high-speed instrumentation amplifier or to convert a differential signal to a single-ended signal..
  • Differential amplifiers can process single-ended inputs as interactive differential outputs or treat differential inputs as differential outputs. These amplifiers have two independent feedback loops that control the differential and common-film output voltages, respectively..
  • Chip features 1. High speed AD8130: 270 MHz, 1090 V/us (G= +1) AD8129: 200 MHz, 1060 V/us (G= +10) 2. High Common Mode Rejection Ratio (CMRR) 94 dB (minimum, DCE100 kHz) 80 dB (minimum, 2 MHz) 70 dB (10 MHz) 3. High input impedance: 1 MQ differential 4. Low noise AD8130: 12.5 nV/Hz AD8129: 4.5 nV/vHz.
  • 5. Input common mode range: ±10.5V 6 low distortion, 1V peak-to-peak (5 MHz): AD8130, -79 dBc (Worst Harmonic, 5 MHz AD8129, -74 dBc (Worst Harmonic, 5 MHz) 7. User adjustable gain G= +1 without external components 8. Supply Voltage Range: +4.5V to ±12.6V 9. Power saving mode.
Check Stock

Yukon Gear & Axle (YK GM8.5) Rear Master Overhaul Kit for GM 8.5 Differential

  • Yukon Master Overhaul kits give you all the high quality parts you need to start and finish every differential job.
  • Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs.
  • This kit uses Timken bearings and races along with high quality seals and small parts.
  • Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, c-clip, crush sleeve,.
  • Yukon's Master Overhaul kits are the most comprehensive and complete kits on the market.
Check Stock

BTSHUB Silent Bearing Puller Kit Dent Puller Set, Differential Rear Axle Bush Tools Mount Bushing Kit for BMW E36/46, E38/39, E60/61, E31,E90/91

  • DIFFERENTIAL & AXLE BUSH TOOLS: This axle bush tool set is ideal for removing and installing ball joints, bushes and bearings for numerous BMW models from 1 Series to 8 Series..
  • APPICATION: Suitable for vehicles from BMW, 1 Series models, for example, E81, E87.
  • 3 Series E36, E46, E83, E90, E91, E92, E93.
  • 8 Series models E31, E85 Z4 models, E86, and S R53 model.
  • PROFESSIONAL GRADE QUALITY AND DURABILITY:Made of heavy-duty alloy construction, which has high hardness and good toughness. High quality and designed for long life in daily workshop use.
  • FEATURES: Including differential and axle bush tools, this is a comprehensive kit to renew the ball joints and bearings in the rear wheel carrier, longitudinal arms and rear axle, etc. A 8.9" feed rod for actuating the Silent bearing inserts with thread M12 x 0.06" long, at the end of the spindle with thread M12 x 0.06" short.
  • EASY FOR STOREAGE: Comes with a premium well-organized box for easy storage and transport. All thread repai....
Check Stock

Yukon Gear & Axle (AK SET10) Replacement Axle Bearing & Seal Kit for Dana 44/Dana 20

  • Yukon Master Overhaul kits give you all the high quality parts you need to start and finish every differential job.
  • Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs.
  • This kit uses Timken bearings and races along with high quality seals and small parts.
  • Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, oil baffles and slingers, Thread locking compound, marking compound with brush, and gasket.
  • Yukon's Master Overhaul kits are the most comprehensive and complete kits on the market.
Check Stock

AISIN CKT-063 Clutch Kit

  • Designed for efficient, consistent performance and manufactured using only the highest quality materials.
  • With superior OE technology and know-how, Aisin ensures that every differential lock actuator provides perfect OE form, fit, and function.
  • Differential lock actuator engages locking function, changing differential from open to locked configuration.
  • Unit mounts directly to the differential.
Check Stock

Traxxas 5137 Differential Oil, 50,000 Weight

  • Traxxas performance differential oils make it easy to increase or decrease the limited slip action of the gear differential.
  • Altering the limited slip capability can enhance turning performance for faster exit speeds.
  • Higher weights result in more differential locking action.
  • Use Traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles.
Check Stock

Traxxas 5136 Differential Oil, 30, 000 Weight

  • Traxxas performance differential oils make it easy to increase or decrease the limited slip action of the gear differential.
  • Altering the limited slip capability can enhance turning performance for faster exit speeds.
  • Higher weights result in more differential locking action.
  • Use Traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles.
Check Stock

MyParts Rear Differential Fluid VTM-4 1 Gallon, fits Acura, fits Honda

  • Vehicle Fitment Notes: Manufacturer Label: Differential Oil Differential Oil - Notes: 1 gallon container, fits Honda VTM-4, fits Honda VTM-4 Please refer to the owners manual to confirm this is the correct fluid your s differential. - Part Type: Differential Oil - Quantity Required: 1.
  • Designed With The Latest Software And Manufactured With Modern Tooling.
  • Same Dimensions as Original OE Vehicle Parts.
Check Stock

Motive Gear D60-373 Differential Ring and Pinion with 3.73 Ratio for 9.75 (Inch) (10 Bolt Cover), Dana 60 Standard, 41-11 Teeth

  • yukon master overhaul kits give you all the high quality parts you need to start and finish every differential job.
  • yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs.
  • this kit uses timken bearings and races along with high quality seals and small parts.
  • included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, oil baffles and slingers, thread locking compound, marking compound with brush, and gasket.
  • yukon's master overhaul kits are the most comprehensive and complete kits on the market.
Check Stock