Categories

Best Differential Crush Sleeve

12pcs Transmission Fluid and Rear Differential Oil Drain Plug Washer Gasket Seal - 20mm+18mm Replacement for Honda/Acura PN 94109-2000 (6pcs) 90471-PX4-000 (6pcs) 1990-2023 by AUTOMAJOR

  • PREMIUM QUALITY: only high grade rubber seal and strict quality guidelines are used in the production of our Transmission Fluid and Rear Differential Oil Drain Plug Crush Washer set offering you the top quality of every batch shipped to you..
  • WIDE COMPATIBILITY: the Transmission Fluid and Rear Differential Oil Drain Plug Crush Washer is compatible with Honda/Acura models including, but not limited to Accord Civic Clarity CR-V CR-Z Crosstour Element Fit HR-V Insight Passport Pilot Prelude Ridgeline Odyssey CL Integra ILX Legend MDX NSX RDX RL RLX RSX TL TLX TSX Vigor ZDX 1990-2022.
  • DIMESIONS: OEM Part Number 94109-2000 have the following dimension: ID is 0.94in = 24mm.
  • thickness is 0.04in = 1mm. 90471-PX4-000 have the following dimension: ID is 0.7in = 18mm.
  • SECURE FIT: our oil drain plug washer fits snug and flush providing a much more tight and secure fit than plastic or cooper seals and boast a much longer lasting sealing capabilities..
  • WEAR RESISTANCE: The 20mm and 18mm Transmission Fluid and Rear Differential Oil Drain Plug Crush Washer Gasket prevents any environmental damage such as high humidity, oxidative damage, corrosion excessive wear and tear..
Check Stock

Yukon Gear & Axle (YK GM8.5) Rear Master Overhaul Kit for GM 8.5 Differential

  • Yukon Master Overhaul kits give you all the high quality parts you need to start and finish every differential job.
  • Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs.
  • This kit uses Timken bearings and races along with high quality seals and small parts.
  • Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, c-clip, crush sleeve,.
  • Yukon's Master Overhaul kits are the most comprehensive and complete kits on the market.
Check Stock

Yukon Gear & Axle (AK SET10) Replacement Axle Bearing & Seal Kit for Dana 44/Dana 20

  • Yukon Master Overhaul kits give you all the high quality parts you need to start and finish every differential job.
  • Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs.
  • This kit uses Timken bearings and races along with high quality seals and small parts.
  • Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, oil baffles and slingers, Thread locking compound, marking compound with brush, and gasket.
  • Yukon's Master Overhaul kits are the most comprehensive and complete kits on the market.
Check Stock

Motive Gear D60-373 Differential Ring and Pinion with 3.73 Ratio for 9.75 (Inch) (10 Bolt Cover), Dana 60 Standard, 41-11 Teeth

  • yukon master overhaul kits give you all the high quality parts you need to start and finish every differential job.
  • yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs.
  • this kit uses timken bearings and races along with high quality seals and small parts.
  • included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, oil baffles and slingers, thread locking compound, marking compound with brush, and gasket.
  • yukon's master overhaul kits are the most comprehensive and complete kits on the market.
Check Stock

12157-10010 90430-24003 90430-18008 Differential and Transmission/Transfer Case Drain Plug Crush Washers Gaskets Compatible with Toyota 4runner Tacoma Tundra FJ cruiser Land Cruiser

  • This is the direct replacement for the part# 12157-10010 1215710010.
  • This is the front and rear differential fill and drain plug crush washers compatible with Toyota 4Runner Tacoma FJ Cruiser Land Cruiser etc.
  • Size: O.D.(outside diameter): 24 mm / 0.94 inch , I.D.(inside diameter): 18 mm / 0.71 inch , Thickness: 2.5 mm / 0.09 inch.
  • Package including:10 pcs crush washers,meet OEM Specification.
Check Stock

Front and Rear Differential Fill and Drain Plug Crush Washers Gasket Fits for Toyota 4Runner Tacoma FJ Cruiser Land Cruiser, Replacement for the part# 12157-10010, 10 Pack

  • This is the direct replacement for the part# 12157-10010 1215710010.
  • This is the front and rear differential fill and drain plug crush washers fits for Toyota 4Runner Tacoma FJ Cruiser Land Cruiser etc.
  • O.D.(outside diameter): 24 mm / 0.94 inch , I.D.(inside diameter): 18 mm / 0.71 inch , Thickness: 2.5 mm / 0.09 inch.
Check Stock

Genuine Toyota Parts - Gasket, Drain Plug (12157-10010)

  • Includes 20PCS M18 Stainless Steel Front and Rear Differential Fill and Drain Plug Crush Washers Gasket.
  • Aftermarket Part Replace for Toyota 21116, 1215710010, 12157-10010, BAS03565.
  • High Quality And Some Universal Gaskets Available..
Check Stock

UTSAUTO 90471-PX4-000 Transmission Fluid Drain Plug Crush Washer Oil Crush Washers/Drain Plug Gaskets Replacement for Honda Accord Acura Civic Ridgeline Odyssey CRV CR-V Pilot Fit Element (25Pcs)

  • PERFECT REPLACEMENT: UTSAUTO oil crush washers / drain plug gaskets are a perfect replacement for Honda OEM washer / gasket. Ideal for oil changes and oil filter replacements.
  • High Quality: Our oil drain plug gaskets are made with high quality materials, design and produced by the original washers ,can directly fits your cars.
  • Part Number: 90471-PX4-000, 90471PX4000.Size: Outside Diameter: 25.5 mm / 1 inch, Inside diameter: 18 mm / 0.71 inch..
  • This is the rear differential fill and drain plug gaskets for Honda Accord Acura Civic Ridgeline Odyssey CRV CR-V Pilot Fit Elemen.
  • Package Include:25pcs 90471-PX4-000 Transmission Fluid Drain Plug Crush Washer.
Check Stock

Brooks Women's Running Shoes, Multicolour Black Pink Grey 070, womens 10 D - Wide

  • Crush mile after mile in the plush cushioning and maximum support of the Brooks® Addiction 13!.
  • Surface: Road. Differential: 12 mm Moisture-managing, breathable mesh upper with structurally-supportive synthetic overlays. Lace-up closure. Padded tongue and collar. Buttery smooth fabric lining offers a great in-shoe feel. Removable foam insole. BioMoGo DNA midsole supplies long-lasting cushioning, and features an environmentally-friendly build that breaks down 50 times quicker at the landfill, compared to similar midsole materials. Extended Progressive Diagonal Rollbar® helps contr.
Check Stock

XtremeAmazing Front and Rear Differential Filler Oil Drain Plug Crush Washers Gasket Replace 12157-10010 Pack of 10

  • This is a complete set for front, rear differential and transfer case compatible with Toyota 4runner Tacoma Tundra FJ cruiser Land Cruiser etc..
  • Package including 6pcs replacement of the part# 12157-10010 (4 For Rear Diff, 2 For Front Dif Fill).
  • Package including 2pcs replacement of the part# 90430-24003 (2 Copper Washer For Front Dif Drain).
  • Package including 4pcs replacement of the part# 90430-18008/90430-A0003 (4 Alum Washers For Transfer Case).
  • Total 12pcs crush washers seals gaskets in the package,meet or exceed OEM Specification..
Check Stock

Prime Ave 5 Rear Differential + 5 Automatic Transmission Plug Washers Compatible With Honda & Acura Part# 90471-PX4-000 & 94109-20000

  • Includes (5) Rear Differential + (5) Automatic Transmission Plug Washers Part# 90471-PX4-000 & 94109-20000.
  • Compatible replacement crush washers designed for a solid seal | Manufactured in Japan to exact OE specification.
  • User-friendly & convenient packaging ~ Parts are packed & labeled taking the guess of figuring out which part is which.
  • 90471-PX4-000 ~ 18mm I.D X 26mm O.D X 2mm Thick | 94109-20000 ~ 20mm I.D X 28mm O.D X 2mm Thick.
  • Please refer to the PRODUCT DESCRIPTION below for your vehicle fitment information.
Check Stock

Taidacent THS4131 Fully Differential Input/Output Low Noise Amplifier Module Single Ended to Differential Single Ended Input Double Ended Output

  • Name: THS4131 Fully Differential Amplifier Size: 45mm X 34mm Supply Voltage Range: 5V Single Supply ±15V Dual Supply.
  • This module can implement single-ended to differential, single-ended input, and double-ended output. Has high performance, low noise, wide power supply voltage range and other advantages..
  • The THS413x consists of a true fully differential signal path from input to output. This design produced excellent common-mode noise suppression wells that improved total harmonic distortion..
  • Chip features High performance 150 MHz - 3 dB bandwidth (VCC = ±15V) 51V/us slew rate -100dB third harmonic distortion (250kHz) 2. Low noise 1.3 nV/vHz Input Reference Noise Differential input/cent output Balanced Output Suppresses Common Mode Noise Reduce second harmonic distortion from dry differential output.
  • Wide supply voltage range VCC-5 V Single Supply to ±15V Dual Supply ICC (SD) = 860 u A Shutdown Mode (THS4130) Chip application Single-ended to differential conversion Differential ADC Driver Differential antialiasing Differential transmitters and receivers Output Level Translator.
Check Stock

Taidacent AD8130 Differential Receiver Amplifier Module Differential to Single-ended High Common-mode Rejection Ratio Low Noise Low Distortion

  • Name: AD8130 Differential Amplifier Size: 43mm X 38mm Supply voltage range: ±5V~±12V.
  • The differential-to-single-ended amplifier, which has a 270-MHz bandwidth and a very high common-mode rejection ratio (CMRR) at high frequencies, can also be effectively used as a high-speed instrumentation amplifier or to convert a differential signal to a single-ended signal..
  • Differential amplifiers can process single-ended inputs as interactive differential outputs or treat differential inputs as differential outputs. These amplifiers have two independent feedback loops that control the differential and common-film output voltages, respectively..
  • Chip features 1. High speed AD8130: 270 MHz, 1090 V/us (G= +1) AD8129: 200 MHz, 1060 V/us (G= +10) 2. High Common Mode Rejection Ratio (CMRR) 94 dB (minimum, DCE100 kHz) 80 dB (minimum, 2 MHz) 70 dB (10 MHz) 3. High input impedance: 1 MQ differential 4. Low noise AD8130: 12.5 nV/Hz AD8129: 4.5 nV/vHz.
  • 5. Input common mode range: ±10.5V 6 low distortion, 1V peak-to-peak (5 MHz): AD8130, -79 dBc (Worst Harmonic, 5 MHz AD8129, -74 dBc (Worst Harmonic, 5 MHz) 7. User adjustable gain G= +1 without external components 8. Supply Voltage Range: +4.5V to ±12.6V 9. Power saving mode.
Check Stock