Digital Microphone Amplifier, Reverberation Board Low Noise for Audio Equipments
- For microcontrollers without an analog-to-digital converter or when you want a higher-precision ADC, the ADS1015 provides 12-bit precision at 3300 samples..
- Cond over I2C,The chip can be configured as 4 single-ended input channels, or two differential channels..
- As a nice bonus, it even includes a programmable gain amplifier, up to x16, to help boost up smaller single/differential signals to the full range..
- We like this ADC because it can run from 2V to 5V power/logic, can measure a large range of signals and its super easy to use. It is a great general purpose 12 bit converter..
- The chip's fairly small so it comes on a breakout board with ferrites to keep the AVDD and AGND quiet. Interfacing is done via I2C. The address can be changed , you can have up to 4 ADS1015's connected on a single 2-wire I2C bus for 16 single ended inputs..
Check StockNVX VADM4 400W RMS Full Range Class D 4-Channel Car/Marine/Powersports Compact Micro Amplifier - Marine Certified
- RMS POWER: 【4 ohms: 75W x 4 chan.】【2 ohms: 100W x 4 chan.】【4 ohms bridged: 200W x 2 chan.】.
- COMPACT: Cutting edge Micro Class D technology allows amplifier to be extremely compact. Dimensions: 7.2"L x 3.4"W x 1.45"H.
- MARINE CERTIFIED: Our VAD line includes a conformally coated, marine grade circuit board. This allows this amplifier to be installed in nearly any application..
- FEATURES: LED indicator lighting | 3-way protection circuitry | Balanced Differential Inputs | Speaker-level (high-level) inputs | Selectable crossover modes.
Check StockMonolith Liquid Gold Balanced Headphone Amplifier & DAC by Alex Cavalli, Solid State Amp, AKM AK4493EQ DAC, Balanced & Single-Ended Headphone Outputs
- Solid State Amplifier : Balanced design. Ultra high power. The Liquid Gold X is a fully differential, balanced, current feedback, solid state amplifier with an approximate full output power of 3.6 watts per channel into a 50-ohm load. The amplifier is microprocessor controlled using precision A-to-D and D-to-A conversions to manage and monitor the runtime behavior of all critical aspects of the circuitry..
- AKM AK4493EQ DAC: Detailed sound. Exceptional musicality. The AKM AK4493 is AKM's new flagship 32-bit stereo premium DAC. It supports PCM inputs up to 768kHz and a Direct Stream Digital (DSD) input of 2.8/5.6/11.2 (maximum) MHz, the industry's highest level. An internal circuit employs a newly developed 32-bit digital filter for the ultimate in sound quality and musicality..
- Balanced and Single-Ended Headphone Outputs: With multiple inputs and outputs for balanced and single-ended operation and easy front panel input selection, the Liquid Gold X is compatible with just about everything..
- Versatile Inputs: Digital or Analog — We've Got You Covered: The Liquid Gold X amplifier features both single-ended and balanced analog inputs, as well as USB, Coaxial, and Optical digital inputs to support all your connectivity needs..
Check StockJL Audio XD1000/1v2 Monoblock Class D 1000W Subwoofer Amplifier
- 600 watts RMS x 1 at 4 ohms (1000 watts RMS x 1 at 2 ohms) variable low-pass filter (50-500 Hz, 12 or 24dB/octave) switchable subsonic filter (30 Hz, 24 dB/oct).
- Class D amplifier design with NextD switching amp technology differential-balanced inputs eliminate noise coming from your vehicle's electrical system Advanced Rollback Protection System prevents thermal shut-down speaker- and preamp-level inputs (speaker-level input requires an.
- preamp outputs auto turn-on via DC offset or signal sensing 4-gauge power and ground leads and a 80-amp fuse recommended — wiring and hardware not included with amplifier.
- no onboard fuses — when installing multiple amps in a system, an additional 80-amp in-line fuse between the distribution block and the amplifier is recommended 14-3/4"W x 2"H x 7-1/8"D.
Check StockADS1115 16-Bit ADC - 4 Channel with Programmable Gain Amplifier
- Provides 16-bit precision at 860 samples/second over I2C.
- Can be configured as 4 single-ended input channels, or two differential channels.
- Up to 4 ADS1015's connected on a single 2-wire I2C bus for 16 single ended inputs possible.
Check StockDAOKI 5PCS PAM8302 2.5W Single Channel Class D Audio Power Amplifier Module Amp Development Board for DIY with Dupont Cable
- This super small mono amplifier is surprisingly powerful - able to deliver up to 2.5 Watts into 4-8 ohm impedance speakers, Inside the miniature chip....
- Since the amp is a class D, its very efficient (over 90% efficient when driving an 8Ω speaker at over half a Watt) - making it perfect for portable....
- The A+ and A- inputs of the amplifier go through 1.0uF capacitors, so they are fully 'differential' - if you don't have differential outputs, simply....
- The output is "Bridge Tied" - that means the output pins connect directly to the speaker pins, no connection to ground. The output is a high frequency....
- Package Content:5 x PAM8302 Class D Amplifier Module, 1 x 11.8" Female-Male Dupont Cables 30 PIN.
Check StockJBL DSP4086 8-Channel Class D Amplifier Design with Digital Signal Processing
- Small footprint, All-in-One Class D Amplifier with DSP Control: JBL DSP Amplifier has everything you need to create a professional sound quality audio system with the ability to mount your amplifier in tight spaces..
- Everything You Need to Get Started: JBL DSP Amplifier has everything you need to create an audio system, or expand your existing one, plus the ability to add more power by using it as a line driver when you are ready for your next power upgrade..
- Simple Tuning Interface with Complex Features: Easy-to-use tuning interface anyone can understand, learn and control with enough horsepower to satisfy experienced installers..
- Versatile Connectivity: This amplifier has balanced differential inputs to provide you with the best sound quality & noise rejection, can accept RCA or speaker-level inputs so it’ll work in almost any system..
- Convenient Bass Control: Wired remote control allows for quick adjustment of low frequency output with -30 to +6dB adjustment directly from the driver’s seat.
Check StockEMB Professional Sound System EB631EQ Graphic Equalizer
- TRS or XLR balanced inputs and outputs differential / Choice of stereo or the sum of the synthesis of left and right channel subwoofer.
- X10 range are two-channel selector switch / Two channels have 40Hz high pass filter (low cut).
- All outputs with phase reverse switch / The output of all bands can be independently adjusted average.
- 24dB/Unkwitz-Riley filters (the professional standard) - Stereo / Mono status indication LEO lights, indicating that the mode selection unit.
Check StockRockford Fosgate Punch PBR400x4D Compact Chassis 400-Watt Full-Range 4-Channel Amplifier
- Our compact (1.5" x 4.25" x 6.75") PBR400x4D is small enough to fit in just about any application but packs a Punch with 400 Watts RMS of power!.
- Versatile design can be used in either 2 or 4 channel configurations (RMS Power Output: 50 Watts x 4 @ 4-Ohm or 100 Watts x 4 @ 2-Ohm or 200 Watts x 2 @ 4-Ohm Bridged).
- Ultra efficient Class D full range design produces maximum power with minimal strain on the vehicle's electrical system. A great choice for both mobile installs as well as motorcycles and recreational vehicles.
- High level inputs with auto-on feature as well as differential RCA inputs along with selectable fixed 12dbB/Octave Butterworth Crossovers make the PBR400x4D amp compatible with just about any installation.
- Famous Rockford Fosgate build quality insures that the PBR400x4D will handle everything you throw at it! Full 1-year parts and labor warranty when purchased from an authorized Rockford Fosgate reseller.
Check StockDORHEA 3PCS ADS1115 16 Bit Analog to Digital Development Board ADC Converter Module 4 Channel Board with Programmable Gain Amplifier 2.0V to 5.5V for Raspberry Pi
- The address can be changed to one of four options (see the datasheet table 5) so you can have up to 4 ADS1115's connected on a single 2-wire I2C bus for 16 single ended inputs..
- For microcontrollers without an analog-to-digital converter or when you want a higher-precision ADC, the ADS1115 provides 16-bit precision at 860 samples/second over I2C..
- The chip can be configured as 4 single-ended input channels, or two differential channels, it even includes a programmable gain amplifier, up to x16, to help boost up smaller single/differential signals to the full range..
- This 16 bit converter can run from 2V to 5V power/logic, can measure a large range of signals and its super easy to use..
- The chip's fairly small so it comes on a breakout board with ferrites to keep the AVDD and AGND quiet. Interfacing is done via I2C..
Check StockCNC Motion Controller - DDCSV3.1 4 Axle Off-Line Controller with Emergency Stop Function Handwheel Kit
- 16 opto isolated digital inputs,3 opto isolated digital outputs.
- ARM9 main control chip,FPGA core algorithm chip.
- USB flash disk support for G code file input,no size limited of the G-code file.
- 4 axle motor Control.Differential Pulse and direction output signal,maximum.500Khz per axle.
- Upgrade algorithm,support soft interpolation,fixed arc interpolation bug of the old version.
Check StockRockford Fosgate R2-750X5 Prime 750-Watt 5-Channel Amplifier
- The R2-750X5 full-range class-D 5-channel amplifier (1.9" x 6.8" x 11.2") is packed with features and performance to deliver power and bass on demand....
- Class D technology makes this amp extremely efficient by reducing demand on the vehicles electrical system (RMS Power: 50 Watts x 4 + 200 Watts x 1 @....
- Featuring C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and....
- Featuring fully adjustable 12 dB/octave high and low pass butterworth crossovers, balanced differential inputs with RCA pass through outputs, high....
- Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller.
Check StockCNC Motion Controller, DDCSV3.1 3 Axle Off-Line Controller with Emergency Stop Function Handwheel Kit for CNC Machine Tools, Printing Machinery
- 1GB internal memory and support standard MPG..
- 16 opto isolated digital inputs,3 opto isolated digital outputs..
- 3 axle motor Control.Differential and direction output signal,maximum.500Khz per axle..
- USB flash disk support for G code file input,no size limited of the G-code file..
- Upgrade algorithm,support soft interpolation,fixed arc interpolation bug of the old version..
Check Stock