Yukon Gear & Axle (YPKM35-S-27-1.5) Standard Open Spider Gear Kit for AMC Model 35 with 27-Spline Axle
- Engineered to Fit Specific Differential Applications.
- Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
Check StockYukon Gear & Axle (YPKD44-S-30) Replacement Standard Open Spider Gear Kit for Dana 44 Differential with 30-Spline Axle
- Engineered to Fit Specific Differential Applications.
- Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
Check StockYukon Dura Grip Limited Slip Positraction Unit for GM 8.5 /8.6 Differential with 30 Spline Axle 2.73-And-Up Ratio YDGGM8.5-3-30-1
- Fits 8.5" & 8.6" GM with 30 Spline Axles.
- Limited Slip Differential with Composite Clutches.
- Yukon Dura Grips feature 4320 chromoly spider gears for ultimate durability.
- Fully rebuildable design and proudly assembled in the USA.
- All units are backed by extensive product testing and state-of-the-art software design.
Check Stock
Taidacent THS4131 Fully Differential Input/Output Low Noise Amplifier Module Single Ended to Differential Single Ended Input Double Ended Output
- Name: THS4131 Fully Differential Amplifier Size: 45mm X 34mm Supply Voltage Range: 5V Single Supply ±15V Dual Supply.
- This module can implement single-ended to differential, single-ended input, and double-ended output. Has high performance, low noise, wide power supply voltage range and other advantages..
- The THS413x consists of a true fully differential signal path from input to output. This design produced excellent common-mode noise suppression wells that improved total harmonic distortion..
- Chip features High performance 150 MHz - 3 dB bandwidth (VCC = ±15V) 51V/us slew rate -100dB third harmonic distortion (250kHz) 2. Low noise 1.3 nV/vHz Input Reference Noise Differential input/cent output Balanced Output Suppresses Common Mode Noise Reduce second harmonic distortion from dry differential output.
- Wide supply voltage range VCC-5 V Single Supply to ±15V Dual Supply ICC (SD) = 860 u A Shutdown Mode (THS4130) Chip application Single-ended to differential conversion Differential ADC Driver Differential antialiasing Differential transmitters and receivers Output Level Translator.
Check Stock
Taidacent AD8130 Differential Receiver Amplifier Module Differential to Single-ended High Common-mode Rejection Ratio Low Noise Low Distortion
- Name: AD8130 Differential Amplifier Size: 43mm X 38mm Supply voltage range: ±5V~±12V.
- The differential-to-single-ended amplifier, which has a 270-MHz bandwidth and a very high common-mode rejection ratio (CMRR) at high frequencies, can also be effectively used as a high-speed instrumentation amplifier or to convert a differential signal to a single-ended signal..
- Differential amplifiers can process single-ended inputs as interactive differential outputs or treat differential inputs as differential outputs. These amplifiers have two independent feedback loops that control the differential and common-film output voltages, respectively..
- Chip features 1. High speed AD8130: 270 MHz, 1090 V/us (G= +1) AD8129: 200 MHz, 1060 V/us (G= +10) 2. High Common Mode Rejection Ratio (CMRR) 94 dB (minimum, DCE100 kHz) 80 dB (minimum, 2 MHz) 70 dB (10 MHz) 3. High input impedance: 1 MQ differential 4. Low noise AD8130: 12.5 nV/Hz AD8129: 4.5 nV/vHz.
- 5. Input common mode range: ±10.5V 6 low distortion, 1V peak-to-peak (5 MHz): AD8130, -79 dBc (Worst Harmonic, 5 MHz AD8129, -74 dBc (Worst Harmonic, 5 MHz) 7. User adjustable gain G= +1 without external components 8. Supply Voltage Range: +4.5V to ±12.6V 9. Power saving mode.
Check StockAISIN CKT-063 Clutch Kit
- Designed for efficient, consistent performance and manufactured using only the highest quality materials.
- With superior OE technology and know-how, Aisin ensures that every differential lock actuator provides perfect OE form, fit, and function.
- Differential lock actuator engages locking function, changing differential from open to locked configuration.
- Unit mounts directly to the differential.
Check StockTraxxas 5137 Differential Oil, 50,000 Weight
- Traxxas performance differential oils make it easy to increase or decrease the limited slip action of the gear differential.
- Altering the limited slip capability can enhance turning performance for faster exit speeds.
- Higher weights result in more differential locking action.
- Use Traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles.
Check StockTraxxas 5136 Differential Oil, 30, 000 Weight
- Traxxas performance differential oils make it easy to increase or decrease the limited slip action of the gear differential.
- Altering the limited slip capability can enhance turning performance for faster exit speeds.
- Higher weights result in more differential locking action.
- Use Traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles.
Check StockMyParts Rear Differential Fluid VTM-4 1 Gallon, fits Acura, fits Honda
- Vehicle Fitment Notes: Manufacturer Label: Differential Oil Differential Oil - Notes: 1 gallon container, fits Honda VTM-4, fits Honda VTM-4 Please refer to the owners manual to confirm this is the correct fluid your s differential. - Part Type: Differential Oil - Quantity Required: 1.
- Designed With The Latest Software And Manufactured With Modern Tooling.
- Same Dimensions as Original OE Vehicle Parts.
Check StockDilwe Metal Ball Differential Fit for WLtoys 1/28 K989 K969 K979 K999 P929 P939 Remote Control Car RC Accessories
- This ball differential is made of high-quality metal material, fine workmanship, durable and long-term use..
- Our ball differential is ideal for replacing the original parts of the WLtoys 1/28 K989 K989 K969 K979 K999 P929 P939..
- RC differential is not only perfect in size, light in weight, but also easy to install and does not affect the speed of the car..
- While replacing the old ball differential accessory, it also improves control of the product and gives you more control over the car..
- RC metal differential has very good compatibility and is guaranteed to meet your standard requirements for original equipment. Help you repair expensive equipment yourself..
Check Stock
ARB 750001 Competition Differential Cover for DANA 50/60 ideal for increasing the rigidity of the whole axe and protect the differential and ring and pinion set from any off-road hazards
- WHY BUYING ARB 750001 DIFFERENTIAL COVER FOR DANA 50/60: When off-road, it is inevitable that obstacles and off-road hazards will be encountered that could potentially inflict expensive damage to your differential. To prevent this, ARB manufactures the Differential Cover. Using high tensile nodular iron, it has been engineered to protect the differential and ring and pinion set from any off-road hazards..
- IMPORTANT ARB 750001 FEATURES: Computer-optimized cross brace design increases the structural rigidity of the axle / Top quality neodymium magnets / Prolonged carrier bearing life / Magnet location in the end of the dipstick.
- BEST ARB DIFFERENTIAL COVER OF ALL: Computer-optimized cross brace design increases the structural rigidity of the whole axle / Unique dipstick/filler cap design allows differential oil level to be adjusted for customized high driveline angles / Prolonged carrier bearing life due to extra support to the bearing alignment / Top-quality, high-power neodymium magnets are used in both the drain plug and the dipstick to collect metallic wear particles as the vehicle moves.
Check StockDV8 Damn Good Verge Bowling Ball (15)
- CORE Threshold M. D. (Medium Differential).
- Low RG, medium to low differential, a strong solid cover, and a 1500 grit finish is the recipe for this Damn Good ball, COLOR Grape Sparkle CORE Threshold M. D. (Medium Differential).
Check StockDANFOSS 013G-8015 Straight HOT Water/Low Pressure/STEAM Nickel Plated 1/2 in Valve Thermostatic Radiator 10 PSI 250 Degree F
- Actuator Size: 9 mm | Actuator Size [in]: 0.35 in | Actuator System [mm]: 9 mm | Ambient Temperature max [°C]: 50°C | Body material: Brass |....
- Differential pressure [bar] [Max]: 11 bar | Differential pressure [bar] [Min]: 0 bar | Differential pressure [psi] [Max]: 160 psi | Differential....
- Maximum Working Pressure [psig]: 160 psig | Media recommendations: Technical Water | Media tolerance comments: Neutral media | Number of Ways: 2/2 |....
- Tightness: Internally: Better than 8.3 x 10-2 mbar l/sec (5 ccm air per min).
- Externally: Better than 1 x 10-3 mbar l/sec (100% He) | Viscosity: Max.....
- Supply Scope: 1 unit of Danfoss EV210A, Instruction Manual | Applications: Water, Steam, Oil, Compressed Air, Aggressive Liquids and Gases, Industrial....
Check Stock
