Categories

Best Differential Switch

EMB Professional EBX9Series Sound System Digital Crossover with XLR Input and Output for Home, DJ Performance, Club, Studio, Stage, Show, Entertainment

  • Stereo half-frequency, single-channel third-frequency electronic crossover. Trs or XLR balanced input and output Differential. Choice of stereo or the sum of left and right channels while the synthesis of ultra-low sound. Two channels are selected Xiao range switch. Two channels have 40Hz high pass filter (frequency cut End). all outputs with phase reverse switch.
  • Technical parameters: TRS or XLR balanced input and output Differential/ choice of stereo or the sum of the synthesis of left and right channel subwoofer.
  • The scope of the two-channel selection switches are x 10 two channels have 40Hz high pass filter (frequency cut End).
  • Therefore, the output spectrum can be independently adjusted average dB/ Oct linkwttz-riley filters (the professional standard). stereo/ mono status indication Leo lights, indicate the selected Mode of operation.
  • 24dB/Oct linkwitz-riiey filters (the professional standard) stereo/ mono status indication Leo lights, indicate the selected Mode of operation.
Check Stock

Braeburn 2000NC Value 5-2 Day Programmable 1H / 1C

  • 5-2 day separate weekday/weekend programming, bright blue display backlight.
  • Adjustable temperature limits, hardwire or battery powered, permanent memory retains settings, filter check monitor.
  • Adjustable temperature differential, adaptive recovery mode (arm ), separate O & B terminals.
  • Meets energy aware guidelines*, ESD guard electronic circuitry, low battery indication,compressor short cycle protection.
  • Temporary program override, programmable extended hold mode, front access reset button, F˚/C˚ switch, gas/electric Fan switch.
Check Stock

EMB Professional Sound System EB631EQ Graphic Equalizer

  • TRS or XLR balanced inputs and outputs differential / Choice of stereo or the sum of the synthesis of left and right channel subwoofer.
  • X10 range are two-channel selector switch / Two channels have 40Hz high pass filter (low cut).
  • All outputs with phase reverse switch / The output of all bands can be independently adjusted average.
  • 24dB/Unkwitz-Riley filters (the professional standard) - Stereo / Mono status indication LEO lights, indicating that the mode selection unit.
Check Stock

Taidacent THS4131 Fully Differential Input/Output Low Noise Amplifier Module Single Ended to Differential Single Ended Input Double Ended Output

  • Name: THS4131 Fully Differential Amplifier Size: 45mm X 34mm Supply Voltage Range: 5V Single Supply ±15V Dual Supply.
  • This module can implement single-ended to differential, single-ended input, and double-ended output. Has high performance, low noise, wide power supply voltage range and other advantages..
  • The THS413x consists of a true fully differential signal path from input to output. This design produced excellent common-mode noise suppression wells that improved total harmonic distortion..
  • Chip features High performance 150 MHz - 3 dB bandwidth (VCC = ±15V) 51V/us slew rate -100dB third harmonic distortion (250kHz) 2. Low noise 1.3 nV/vHz Input Reference Noise Differential input/cent output Balanced Output Suppresses Common Mode Noise Reduce second harmonic distortion from dry differential output.
  • Wide supply voltage range VCC-5 V Single Supply to ±15V Dual Supply ICC (SD) = 860 u A Shutdown Mode (THS4130) Chip application Single-ended to differential conversion Differential ADC Driver Differential antialiasing Differential transmitters and receivers Output Level Translator.
Check Stock

Taidacent AD8130 Differential Receiver Amplifier Module Differential to Single-ended High Common-mode Rejection Ratio Low Noise Low Distortion

  • Name: AD8130 Differential Amplifier Size: 43mm X 38mm Supply voltage range: ±5V~±12V.
  • The differential-to-single-ended amplifier, which has a 270-MHz bandwidth and a very high common-mode rejection ratio (CMRR) at high frequencies, can also be effectively used as a high-speed instrumentation amplifier or to convert a differential signal to a single-ended signal..
  • Differential amplifiers can process single-ended inputs as interactive differential outputs or treat differential inputs as differential outputs. These amplifiers have two independent feedback loops that control the differential and common-film output voltages, respectively..
  • Chip features 1. High speed AD8130: 270 MHz, 1090 V/us (G= +1) AD8129: 200 MHz, 1060 V/us (G= +10) 2. High Common Mode Rejection Ratio (CMRR) 94 dB (minimum, DCE100 kHz) 80 dB (minimum, 2 MHz) 70 dB (10 MHz) 3. High input impedance: 1 MQ differential 4. Low noise AD8130: 12.5 nV/Hz AD8129: 4.5 nV/vHz.
  • 5. Input common mode range: ±10.5V 6 low distortion, 1V peak-to-peak (5 MHz): AD8130, -79 dBc (Worst Harmonic, 5 MHz AD8129, -74 dBc (Worst Harmonic, 5 MHz) 7. User adjustable gain G= +1 without external components 8. Supply Voltage Range: +4.5V to ±12.6V 9. Power saving mode.
Check Stock

Micsig 700V 100MHz High Voltage Differential Probe kit 3.5ns Rise Time 10X/100X Attenuation Rate Oscilloscope Probe Kit Accessory DP10007

  • Widely Used: The attenuation rate is 10X/100X, widely used in any brand of oscilloscope..
  • Maximum differential test voltage (DC+ACPK-PK): 70V (10X), 700V (100X). You can safely measure floating voltages up to 700V and have a bandwidth up to 100 MHz..
  • Easier and Safer Use: High voltage differential probes sample high impedance isolation between input and output to protect person safety. Power supply USB DC 5V output, more portable while Oscilloscope has USB interface..
  • Versatile Kit: All 6 pieces with three different connectors help to test various on different occasions, including 2 alligator clips, 2 hook clips and 2 pincer clips..
  • Applications: Floating Measurements, Switch-Mode Power Supply (SMPS), Motor Drive Design, Power Device Testing & Evaluation, Power Converter Testing & Design..
Check Stock

Air Compressor Pressure Control Switch 4 Ports 95-125 PSI w/ 0-200 PSI Gauge 150 PSI pop off valve

  • Brand new Square D brand, Pumptrol air compressor pressure switch, model: 9013FHG42J59M1X 135-175 PSI with unloader control valve and On / Off switch..
  • This pressure switch is designed for a 2 stage air compressor pumping up to 175 PSI but can be adjusted anywhere from 100-200 PSI..
  • Model: 9013FHG42J59M1X Number of Pressure Sensing Connection Ports: One 1/4" Female NPT (Note: 1/4" NPT Measures About 1/2" In Diameter).
  • Unloader Connection Port: 1/4" Compression Which Accepts 1/4" Outside Diameter Copper Or High Pressure Tubing.
  • Preset On Pressure: 135 PSI Preset Off Pressure:175 PSI Differential: 40PSI Can Be Used With Single Or Three Phase.
Check Stock

AISIN CKT-063 Clutch Kit

  • Designed for efficient, consistent performance and manufactured using only the highest quality materials.
  • With superior OE technology and know-how, Aisin ensures that every differential lock actuator provides perfect OE form, fit, and function.
  • Differential lock actuator engages locking function, changing differential from open to locked configuration.
  • Unit mounts directly to the differential.
Check Stock

Traxxas 5137 Differential Oil, 50,000 Weight

  • Traxxas performance differential oils make it easy to increase or decrease the limited slip action of the gear differential.
  • Altering the limited slip capability can enhance turning performance for faster exit speeds.
  • Higher weights result in more differential locking action.
  • Use Traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles.
Check Stock

Traxxas 5136 Differential Oil, 30, 000 Weight

  • Traxxas performance differential oils make it easy to increase or decrease the limited slip action of the gear differential.
  • Altering the limited slip capability can enhance turning performance for faster exit speeds.
  • Higher weights result in more differential locking action.
  • Use Traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles.
Check Stock

Hosim 9156 46+ KMH High Speed RC Monster Trucks 1:12 Scale Large Size RC Cars for Adults Boys Kids- Radio Controlled RC Off Road Electronic Hobby Grade Remote Control Cars(Green)

  • ...car's four wheels are installed independent suspension springs let cross-country car body is more flexible and plays shockproof function, to protect electronic components inside the car body.
  • Rubber tires material is made of high quality PVC material, soft and elastic can be adjusted based on the road.
  • 【 Upgraded Differential Gear & All Terrain 】--- The four wheels consist of bouncing spring material, and the upgraded metal differential gear improves differential speed of the wheels. Suitable for all the road, such as on / off Road, Sand, Desert, 45° Rock climbing, puddle, Grass etc..
Check Stock

DuraChoice 2\ Oil Filled Vacuum Pressure Gauge - Stainless Steel Case, Brass, 1/4\ NPT, Lower Mount Connection, 30HG/60PSI

  • Pressure switch with 30-50 psi pressure setting range activates an electrically driven water pump within a power circuit when the adjustable rising and falling thresholds are reached.
  • Switch works with a 1. 5 hp or less pump, has an adjustable differential range of 15-30 psi, and has a cut-out range of 20-65 psi.
  • NEMA 1 enclosure has a 1/4" NPSF internal fluid connection.
Check Stock

lefoo LF10-1H-1-NPT1/4-95-125 Pressure Switch

  • Brand new LEFOO 95-125 PSI air compressor pressure switch, Single Port..
  • ¼" COMPRESSION UNLOADER VALVE CONNECTION.
Check Stock