Categories

Best Differential Upgrade

Taidacent THS4131 Fully Differential Input/Output Low Noise Amplifier Module Single Ended to Differential Single Ended Input Double Ended Output

  • Name: THS4131 Fully Differential Amplifier Size: 45mm X 34mm Supply Voltage Range: 5V Single Supply ±15V Dual Supply.
  • This module can implement single-ended to differential, single-ended input, and double-ended output. Has high performance, low noise, wide power supply voltage range and other advantages..
  • The THS413x consists of a true fully differential signal path from input to output. This design produced excellent common-mode noise suppression wells that improved total harmonic distortion..
  • Chip features High performance 150 MHz - 3 dB bandwidth (VCC = ±15V) 51V/us slew rate -100dB third harmonic distortion (250kHz) 2. Low noise 1.3 nV/vHz Input Reference Noise Differential input/cent output Balanced Output Suppresses Common Mode Noise Reduce second harmonic distortion from dry differential output.
  • Wide supply voltage range VCC-5 V Single Supply to ±15V Dual Supply ICC (SD) = 860 u A Shutdown Mode (THS4130) Chip application Single-ended to differential conversion Differential ADC Driver Differential antialiasing Differential transmitters and receivers Output Level Translator.
Check Stock

DV8 Offroad Rear Differential Skid Plate for 2021-2022 Ford Bronco | Paintable Aluminum Inserts | Quick & Easy Installation | Multiple Drain Holes | Bolt-on Installation | Black Finish

  • Upgrade - Our system will help to prevent you from getting caught up on rocks. Multiple drain holes are in several locations to release any water or mud that might collect in the skid plate.
  • Strength - Protects all aspects of your Bronco’s Rear Differential like Gasket Seal, & Pinion. In addition to protecting the full length of your Rear Axle & Upper Link Mounts.
  • Install - Utilizing the provided hardware, install is a smooth process and can be completed with 1-2 people. It takes approximately 1 hour to install. The install guide can be downloaded below!.
  • Fitment - This was engineered to work with the original factory diff covers. This may not fit with aftermarket diff covers.
  • Compatibility - DV8's Rear Differential Skid Plate is compatible with 2021 & 2022 Ford Bronco 6th Gen. Our skid plate fits all 2-door & 4-door Broncos.
Check Stock

Taidacent AD8130 Differential Receiver Amplifier Module Differential to Single-ended High Common-mode Rejection Ratio Low Noise Low Distortion

  • Name: AD8130 Differential Amplifier Size: 43mm X 38mm Supply voltage range: ±5V~±12V.
  • The differential-to-single-ended amplifier, which has a 270-MHz bandwidth and a very high common-mode rejection ratio (CMRR) at high frequencies, can also be effectively used as a high-speed instrumentation amplifier or to convert a differential signal to a single-ended signal..
  • Differential amplifiers can process single-ended inputs as interactive differential outputs or treat differential inputs as differential outputs. These amplifiers have two independent feedback loops that control the differential and common-film output voltages, respectively..
  • Chip features 1. High speed AD8130: 270 MHz, 1090 V/us (G= +1) AD8129: 200 MHz, 1060 V/us (G= +10) 2. High Common Mode Rejection Ratio (CMRR) 94 dB (minimum, DCE100 kHz) 80 dB (minimum, 2 MHz) 70 dB (10 MHz) 3. High input impedance: 1 MQ differential 4. Low noise AD8130: 12.5 nV/Hz AD8129: 4.5 nV/vHz.
  • 5. Input common mode range: ±10.5V 6 low distortion, 1V peak-to-peak (5 MHz): AD8130, -79 dBc (Worst Harmonic, 5 MHz AD8129, -74 dBc (Worst Harmonic, 5 MHz) 7. User adjustable gain G= +1 without external components 8. Supply Voltage Range: +4.5V to ±12.6V 9. Power saving mode.
Check Stock

Chilton Total Car Care Ford Pick-Ups 2004-2012 Repair Manual (Chilton's Total Car Care Repair Manual)

  • Brand New Premium Quality Front Axle 4-Wheel Drive Actuator.
  • Direct Fit For Models Manufactured After January 1996.
  • Can Be Used With APDTY 711711 Wiring Harness As Upgrade On 1988-1996 Models With The Older Style Thermal-Gas Type Actuator.
Check Stock

AISIN CKT-063 Clutch Kit

  • Designed for efficient, consistent performance and manufactured using only the highest quality materials.
  • With superior OE technology and know-how, Aisin ensures that every differential lock actuator provides perfect OE form, fit, and function.
  • Differential lock actuator engages locking function, changing differential from open to locked configuration.
  • Unit mounts directly to the differential.
Check Stock

Traxxas 5137 Differential Oil, 50,000 Weight

  • Traxxas performance differential oils make it easy to increase or decrease the limited slip action of the gear differential.
  • Altering the limited slip capability can enhance turning performance for faster exit speeds.
  • Higher weights result in more differential locking action.
  • Use Traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles.
Check Stock

Traxxas 5136 Differential Oil, 30, 000 Weight

  • Traxxas performance differential oils make it easy to increase or decrease the limited slip action of the gear differential.
  • Altering the limited slip capability can enhance turning performance for faster exit speeds.
  • Higher weights result in more differential locking action.
  • Use Traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles.
Check Stock

CNC Motion Controller - DDCSV3.1 4 Axle Off-Line Controller with Emergency Stop Function Handwheel Kit

  • 16 opto isolated digital inputs,3 opto isolated digital outputs.
  • ARM9 main control chip,FPGA core algorithm chip.
  • USB flash disk support for G code file input,no size limited of the G-code file.
  • 4 axle motor Control.Differential Pulse and direction output signal,maximum.500Khz per axle.
  • Upgrade algorithm,support soft interpolation,fixed arc interpolation bug of the old version.
Check Stock

MyParts Rear Differential Fluid VTM-4 1 Gallon, fits Acura, fits Honda

  • Vehicle Fitment Notes: Manufacturer Label: Differential Oil Differential Oil - Notes: 1 gallon container, fits Honda VTM-4, fits Honda VTM-4 Please refer to the owners manual to confirm this is the correct fluid your s differential. - Part Type: Differential Oil - Quantity Required: 1.
  • Designed With The Latest Software And Manufactured With Modern Tooling.
  • Same Dimensions as Original OE Vehicle Parts.
Check Stock

Dilwe Metal Ball Differential Fit for WLtoys 1/28 K989 K969 K979 K999 P929 P939 Remote Control Car RC Accessories

  • This ball differential is made of high-quality metal material, fine workmanship, durable and long-term use..
  • Our ball differential is ideal for replacing the original parts of the WLtoys 1/28 K989 K989 K969 K979 K999 P929 P939..
  • RC differential is not only perfect in size, light in weight, but also easy to install and does not affect the speed of the car..
  • While replacing the old ball differential accessory, it also improves control of the product and gives you more control over the car..
  • RC metal differential has very good compatibility and is guaranteed to meet your standard requirements for original equipment. Help you repair expensive equipment yourself..
Check Stock

ARB 750001 Competition Differential Cover for DANA 50/60 ideal for increasing the rigidity of the whole axe and protect the differential and ring and pinion set from any off-road hazards

  • WHY BUYING ARB 750001 DIFFERENTIAL COVER FOR DANA 50/60: When off-road, it is inevitable that obstacles and off-road hazards will be encountered that could potentially inflict expensive damage to your differential. To prevent this, ARB manufactures the Differential Cover. Using high tensile nodular iron, it has been engineered to protect the differential and ring and pinion set from any off-road hazards..
  • IMPORTANT ARB 750001 FEATURES: Computer-optimized cross brace design increases the structural rigidity of the axle / Top quality neodymium magnets / Prolonged carrier bearing life / Magnet location in the end of the dipstick.
  • BEST ARB DIFFERENTIAL COVER OF ALL: Computer-optimized cross brace design increases the structural rigidity of the whole axle / Unique dipstick/filler cap design allows differential oil level to be adjusted for customized high driveline angles / Prolonged carrier bearing life due to extra support to the bearing alignment / Top-quality, high-power neodymium magnets are used in both the drain plug and the dipstick to collect metallic wear particles as the vehicle moves.
Check Stock

CNC Motion Controller, DDCSV3.1 3 Axle Off-Line Controller with Emergency Stop Function Handwheel Kit for CNC Machine Tools, Printing Machinery

  • 1GB internal memory and support standard MPG..
  • 16 opto isolated digital inputs,3 opto isolated digital outputs..
  • 3 axle motor Control.Differential and direction output signal,maximum.500Khz per axle..
  • USB flash disk support for G code file input,no size limited of the G-code file..
  • Upgrade algorithm,support soft interpolation,fixed arc interpolation bug of the old version..
Check Stock

Hobbypark Aluminum Differential Housing Bulkhead Front & Rear Upgrades for 1/18 Traxxas LaTrax Teton Desert Prerunner Rally SST, Replacement Parts 7530 (Navy Blue)

  • ✔These Replacement Parts Compatible with Traxxas 1/18 LaTrax Teton Desert Prerunner Rally SST RC Cars Trucks Models.
  • ✔Replacement of stock part #7530,CNC machined for precision,easy upgrade from original ones.
  • ✔These option parts made of 6061-T6 aluminum, Anodized, for lightweight and durable performance..
  • ✔Package include: 2x Differential housing set with Bulkhead(As shown).
  • ✔100% New,Genuine HobbyPark RC Products,Exquisite workmanship & Durable.Buy with Confidence,Friendly Customer Service.
Check Stock