Best Digit Display Led

Treedix 0.56\ 3-Digit 7-Segment Display Common Cathode 3-Digit LED Display Digital Tube Compatible with Arduino (Blue, 5pcs)

• Can be used in Arduino project and other micro-controller development boards as output indicator..

Galaxy DX-939 Backlit 40ch Mobile CB Radio with TalkBack & Roger Beep

• Star Lite faceplate makes all lettering glow in the dark.
• Large, easy-to-read meter with scales for power output, modulation, SWR and incoming signal.
• Five-digit frequency counter and two-digit channel display using large blue LEDs , variable power output control, variable talkback circuit with on/off switch.
• Automatic SWR circuit with an SWR alert LED, Roger Beep circuit with on/off switch.
• Variable dimmer control, frequency display on/off switch, 3-position tone switch for receive.

Basic 16x2 Character LCD - RGB Backlight 5V

• DRIVER IC: The module driver IC is for AIP650 (compatible for TM650), as well as supports multiple display characters..
• 4 DIGIT 7 SEGMENT: The digital tube display module is designed for 4 digit 7 segment, with stable and reliable performance..
• CONTROL INTERFACE: With 4 pins, SDA is bidirectional data line, SCL is clock line, GND is for ground line, and VCC is power supply..
• COMPACT STRUCTURE: The LED digital tube module is exquisite and compact, which can be flexibly used in a variety of situations..
• WIDE APPLICATION: This module is suitable for Raspberry Pi 3 B+ 4, for DIY electronic devices, toy cars and instrumentation etc..

B&K Precision 815 Hand-held Component Tester

• 3-1/2 digit extra large (0.8'' digit) high contrast LCD display.

AOICRIE 2PCS MAX7219 Dot Matrix Module for Arduino Microcontroller 4 in 1 Display with 5pin Line for Arduino for Raspberry Pi (Green)

• ★The MAX7219 also allow the user to select code B decoding or no-decode for each digit..
• ★The MAX7219 is compact, serial input/output common-cathode display drivers that interface microprocessors (µPs) to 7-segment numeric LED displays of up to 8 digits, bar-graph displays, or 64 individual LEDs..
• ★Included on-chip are a BCD code-B decoder, multiplex scan circuitry, segment and digit drivers, and an 8x8 static RAM that stores each digit..
• ★Only one external resistor is required to set the segment current for all LEDs. A convenient 3-wire serial interface connects to all common µPs. Individual digits may be addressed and updated without rewriting the entire display..
• ★The devices include a 150µA low-power shutdown mode, analog and digital brightness control, a scan limit register that allows the user to display from 1 to 8 digits, and a test mode that forces all LEDs on..

yeastar yst-te100 neogate te100 voip pri gateway

• The Digi-Q Sign System provides and efficient method for businesses to conduct service in a timely, orderly manner. Perfect for bakeries, delis, pharmacies, post offices, and more!.
• Clearly visible 4" bright red LED characters are easy to read from across a room. Digit count from 000-999..
• Single wireless push button control activation is simple for customers to use.
• User friendly and easy to install. Just mount the unit to any desired location and connect the included power adapter. Easily mounts to walls..
• System includes: LED digit display, power adapter, wireless remote control, manual ticket dispenser, one ticket roll (3,000 tickets per roll), mounting hardware, and user’s manual.

Horizon Fitness T202 Treadmill

• up to 12 miles per hour and incline up to 12 percent for a wide range of workouts.
• Running Area: 20 by 55 inches with PerfectFLEX™ PLUS cushioning.
• FeatherLIGHT™ folding lift system for easy fold-up storage.
• Two 4-digit LED display windows, alphanumeric display, LED brickyard workout profile.
• Sonic Surround™ speakers with Made for iPod compatibility (charging and control).

horinker 2pcs MAX7219CNG MAX7219 Serially Interfaced 8-Digit LED Display Drivers，24Pins.

ALAMSCN MAX7219 Dot Matrix Module 32x8 4 in 1 LED Display Modules for Arduino Raspberry Pi Microcontroller with 5Pin Wires Red (Pack of 2)

• The MAX7219 is compact, serial input/output common-cathode display drivers that interface microprocessors (µPs) to 7-segment numeric LED displays of up to 8 digits, bar-graph displays, or 64 individual LEDs..
• Included on-chip are a BCD code-B decoder, multiplex scan circuitry, segment and digit drivers, and an 8x8 static RAM that stores each digit..
• Only one external resistor is required to set the segment current for all LEDs. A convenient 3-wire serial interface connects to all common µPs. Individual digits may be addressed and updated without rewriting the entire display..
• The MAX7219 also allow the user to select code B decoding or no-decode for each digit..
• The devices include a 150µA low-power shutdown mode, analog and digital brightness control, a scan limit register that allows the user to display from 1 to 8 digits, and a test mode that forces all LEDs on..

Key Display for AVR 8-Bit Digital LED Tube 8-Bit TM1638 Module

• DRIVER IC: The module driver IC is for AIP650 (compatible for TM650), as well as supports multiple display characters..
• 4 DIGIT 7 SEGMENT: The digital tube display module is designed for 4 digit 7 segment, with stable and reliable performance..
• CONTROL INTERFACE: With 4 pins, SDA is bidirectional data line, SCL is clock line, GND is for ground line, and VCC is power supply..
• COMPACT STRUCTURE: The LED digital tube module is exquisite and compact, which can be flexibly used in a variety of situations..
• WIDE APPLICATION: This module is suitable for 3 B+ 4, for DIY electronic devices, toy cars and instrumentation etc..

DC Power Supply Variable, 30V 10A Bench Power Supply with 4-Digits LED Display, USB Interface, Adjustable Regulated Switching Power Supply with Encoder Adjustment Knob, Output Enable/Disable Button

• 【Overcurrent Protection】When the OCP function is turned on, if the load equipment is short-circuited during operation, the adjustable power supply will automatically stop output and send a buzzer to alert the user. Protect the adjustable power supply and load from damage..
• 【Precise 4-digit LED Display】The variable power supply with a high-definition 4-digit display, which can display three values of voltage, current and power at the same time. The data is accurate to 0.01V and 0.001A. The bright white digital display helps you to operate as usual in the dark, and you can adjust the brightness of the screen as needed..
• 【Compact and Lightweight】The measures of the variable dc power supply is only 7.51*3.56*5.81inch and the weight is only 2.47 pounds, which saves more space on your workbench and is convenient for you to carry when you need it. NANKADF dc power supply is the best choice for beginners or professional electricians..

Galaxy DX-959B Mobile CB Radio with Blue Frequency and Channel Digits and Backlit StarLite Faceplate

• Five-digit frequency counter with large blue digits, two-digit channel display with larger blue digits. Large Galaxy meter with 4 scales: "S" Meter indicates up to 60 dB over S9. Modulation Percentage Scale for use on AM. Power Scale Calibrated for AM and SSB. SWR Scale.
• The Galaxy StarLite faceplate features back lighting of the white faceplate lettering in blue or red color back lighting. All faceplate lettering is white during daylight. The picture shows how the color back lighting turns the lettering blue or red. Frequency and Channel LED digits are always blue - day or night.
• Large, easy-to-read meter with scales for power output, modulation, SWR and incoming signal.
• Variable power output control, variable talkback circuit with on/off switch, automatic SWR circuit and an SWR alert LED, Roger Beep with on/off switch.
• Variable dimmer control with push switch to turn off the meter lamp, display digits and Star Lite back lighting, 3-position tone switch for receive, proprietary Galaxy Noise Filter (GNF) Circuit reduces noise to aid in the recovery of weak SSB signals.

Metra GM Speaker Harness (72-4568) (72-4568)

• BATTERY VOLTAGE MONITOR: The Voltmeter will Flash Constantly When the Voltage is Lower than 11.5V or Higher than 19.8V..
• EASY TO INSTALL: Only Two Wires, The Red Connects to Positive and Black Connects to Negative. No separate power supply is required.
• Mini size with 3-digit LED Digital Display. Simple connection, easy to use, and waterproof..
• DC 12V MOTORCYCLE VOLTMETER: It is perfect to Monitor the Condition of the Battery, You can Use It on Your Motorcycle, Car, Trailer, and Boat Marine Vehicle Truck ATV UTV Car Camper Caravan, etc..
• WIDE APPLICATION: Widely used for cars, motorcycles, bikes, substation automation, distribution automation, test equipment, voltage regulator, and so on..
• LARGE LED DISPLAY:Operation voltage: DC 8 – 16 Volt.
• Display mode: 0.56 inch digital tube. The display shows L.L.L. to warn when the voltage is below 8 Volt.
• the Display shows H.H.H. when the voltage is over 16 Volt..