Best Digital Current
NOYITO ACS712 Current Sensor Module Detector ACS712ELC 5A 20A 30A Amps Amperage Range (Pack of 2) (20A)
- USES: SZT20-CH-420E AC current sensor can measure the AC current in the grid or circuit in real time and convert it to 0-5V / 0-10V or 4-20mA DC current output signal..
- VERSATILE: It can be combined with various AD to form a variety of digital centralized acquisition systems. Or output to the PLC to form an automatic control system, or match the traditional analog and digital indicating instruments, display the measured values..
- EXCELLENT ATTRIBUTES: mutual current monitoring, high current detection accuracy, stable performance, safe isolation of input and output..
- HIGH PRECISION: The product has a hysteresis of less than 1% and can be used in strong magnetic field conditions..
- ADVANTAGES: It has the characteristics of strong overlapping ability, high precision, high isolation, high safety, low power consumption and strong anti-interference ability..
Check StockFluke 117 SureGrip KIT 117 Electrician True RMS Multimeter with TLK-225 SureGrip Master Accessory Kit
- The fluke 116 digital multimeter features a built-in thermometer for HVAC applications.
- Fluke 116 digital multimeter features micro amps to test flame sensors.
- Fluke 116 digital multimeter low input impedance helps prevent false readings due to ghost voltage.
- Fluke 323 true RMS clamp meter measures 400 A AC current and 600 VAC and DC voltage.
- Fluke 323 true rms clamp meter features true RMS AC voltage and current for accurate measurements on non linear signals.
Check StockJuried Engineering CD4016BE CD4016 4016 100-pA 20-V 1 1 SPST 4-Channel Analog Switch Breadboard-Friendly IC DIP-14 Pack of 10
- 20-V digital or ± 10-V peak-to-peak switching.
- 280 ohm- typical on-state resistance for 15-V operation, Matched control-input to signal-output capacitance: Reduces output signal transients, Frequency response, switch on = 40MHz (typ.), Maximum control input current of 1 µA at 18 V over full package temperature range.
- Switch on-state resistance matched to within 10 ohm typ. over 15-V signal-input range, High on/off output-voltage ratio: 65 dB typ. @ fis = 10 kHz, RL = 10 k ohm, Low crosstalk between switches: –50 dB typ. @ fis= 0.9 MHz, RL = 1 k ohm, 5-V, 10-V, and 15-V parametric ratings.
- Example Applications: Analog signal switching/multiplexing: Signal gating, Squelch control, Chopper, Modulator, Demodulator, Commutating switch, Digital signal switching/multiplexing, CMOS logic implementation, Analog-to-digital & digital-to-analog....
Check StockJuried Engineering CD4016BE CD4016 4016 100-pA 20-V 1 1 SPST 4-Channel Analog Switch Breadboard-Friendly IC DIP-14 Pack of 20
- 20-V digital or ± 10-V peak-to-peak switching.
- 280 ohm- typical on-state resistance for 15-V operation, Matched control-input to signal-output capacitance: Reduces output signal transients, Frequency response, switch on = 40MHz (typ.), Maximum control input current of 1 µA at 18 V over full package temperature range.
- Switch on-state resistance matched to within 10 ohm typ. over 15-V signal-input range, High on/off output-voltage ratio: 65 dB typ. @ fis = 10 kHz, RL = 10 k ohm, Low crosstalk between switches: –50 dB typ. @ fis= 0.9 MHz, RL = 1 k ohm, 5-V, 10-V, and 15-V parametric ratings.
- Example Applications: Analog signal switching/multiplexing: Signal gating, Squelch control, Chopper, Modulator, Demodulator, Commutating switch, Digital signal switching/multiplexing, CMOS logic implementation, Analog-to-digital & digital-to-analog....
Check StockJuried Engineering CD4016BE CD4016 4016 100-pA 20-V 1 1 SPST 4-Channel Analog Switch Breadboard-Friendly IC DIP-14 Pack of 5
- 20-V digital or ± 10-V peak-to-peak switching.
- 280 ohm- typical on-state resistance for 15-V operation, Matched control-input to signal-output capacitance: Reduces output signal transients, Frequency response, switch on = 40MHz (typ.), Maximum control input current of 1 µA at 18 V over full package temperature range.
- Switch on-state resistance matched to within 10 ohm typ. over 15-V signal-input range, High on/off output-voltage ratio: 65 dB typ. @ fis = 10 kHz, RL = 10 k ohm, Low crosstalk between switches: –50 dB typ. @ fis= 0.9 MHz, RL = 1 k ohm, 5-V, 10-V, and 15-V parametric ratings.
- Example Applications: Analog signal switching/multiplexing: Signal gating, Squelch control, Chopper, Modulator, Demodulator, Commutating switch, Digital signal switching/multiplexing, CMOS logic implementation, Analog-to-digital & digital-to-analog....
Check StockOBD2 Car Memory Saver Protection Connector Automotive Battery Computer ECU Power Off Protector Vehicle Replacement Battery Leak Detection Tool 12V SAE Quick Release Adapter Supply Cable
- High Quality- The dual digital display battery change tool uses environmentally friendly ABS high-quality materials, high-strength high-quality copper wire, silicone flame-retardant cable, the cable length is 1.3 meter/51 inch (approximately), the insulation is good , environmentally friendly and durable. After testing, the output and input power are normal to ensure that the product is qualified..
- Car dual digital display device- This device can be used with any 12V DC power supply, including trip starter, DC 12V lead-acid battery or other car DC 12V power socket. The power management system with core processor, the voltage and current are displayed at the time, the red displays the voltage, and the green displays the current. Using this simple memory saving device when replacing the car battery will help you avoid these problems and solve many problems first-line..
- Avoid loss of information- The dual digital display battery change tool can retain the dashboard information, audio, storage seat, digital clock, etc. of the car computer. It will not change the speaker and the anti-theft device will not be jammed and will not display a fault code. Retaining the vehicle code and electronic presets can prevent information loss when the on-board computer is ....
Check StockPower Supply, DPS3005 /DPS5005 Communication Version Bucks Power Supply Step-Down Voltage Converter(DPS3005-USB-BT)
- The constant voltage and constant current programmable control power supply module put the collection of analog integration and digital control functions in one.DPS3005 /DPS5005 have same functions, only the technical parameters are different,for example, voltage, current ,etc.
- This module has power-down stored function and can store 10 groups preset value.And it also has the function of extracting quickly two groups stored value. Though this module has reverse connection protection and output short circuit protection, you can muse be in strict accordance with connection description to connect. If you connect the supply power with output, the module will be burnt.
- Compared with the traditional analog power supply, it is more convenient to quickly extract the voltage or current required. This module has many advantages, small size, advanced function, good visual effect, high operability, high-precision, being used independently, being inset into the device and been widely applied.
- LCD display on the module has the function digital voltmeter and ammeter.You can view the preset voltage, input voltage, output voltage, the preset current, output current, output power, etc.
- On the setting data interface, you can adjust over-voltage value, over-current value, o....
Check Stock74LS153 Dual 4-Input Multiplexer (2 Pack)
- Wide Range of Digital and Analog Signal Levels Digital: 3 V to 20 V Analog: ≤ 20 VP-P, Break-Before-Make Switching Eliminates Channel Overlap.
- Low ON Resistance, 125 Ω (Typical) Over 15 VP-P Signal Input Range for VDD – VEE = 18 V.
- High OFF Resistance, Channel Leakage of ±100 pA (Typical) at VDD – VEE = 18 V, Maximum Input Current of 1 µA at 18 V Over Full Package Temperature Range, 100 nA at 18 V and 25°C.
- Logic-Level Conversion for Digital Addressing Signals of 3 V to 20 V (VDD – VSS = 3 V to 20 V) to Switch Analog Signals to 20 VP-P (VDD – VEE = 20 V) Matched Switch Characteristics, rON = 5 Ω (Typical) for VDD – VEE = 15 V Very Low Quiescent Power Dissipation Under All Digital-Control Input and Supply Conditions, 0.2 µW (Typical) at VDD – VSS = VDD – VEE = 10 V.
- Binary Address Decoding on Chip, 5 V, 10 V, and 15 V Parametric Ratings, 100% Tested for Quiescent Current at 20 V.
Check StockDigital Multimeter Tester, Electrical Voltmeter Tester, Volt Multi Meter, Car Battery Tester Circuit Tester
- Functions:Accurate measurement of Non-contact voltage test, AC/DC voltage, current, resistance, continuity, frequency, capacitance, and diode, temperature, wire on-off, Battery test. This multimeter can diagnose the automotive, industrial, and household electrical issues..
- Durable:The outer layer of the digital multimeter is wrapped with a sturdy silicone protective cover. Generally, a drop will not affect the integrity of the multimeter. The automatic range of the digital multimeter is 6000 ranges to ensure the long-term accuracy of the data.
- Convenient: Designed with a digital LCD display and 'Backlight', showing the reading clearly in dim environment areas. There are two pen holders on the back of the digital multimeter for easy placement.
- Safety:Passed CE, RoHS certification, with dual fuses and thermistor protection circuits for anti-burn and explosion-proof. Any current range will be protected stably.
- Practicality: Digital multimeter can record measurement data, which is more convenient. Multimeter with a flashlight lighting..
Check StockUSB 3.0 Tester, Eversame IPS Color Display Digital Multimeter Voltmeter Current and Voltage Monitor, DC 5.1A/30V/150W Power Meter Tester, Test Speed of Chargers, Cables, Capacity of Power Banks-Clear
- USB C Tester, 2 in 1 Type C Type A USB Tester Color Screen IPS Digital Multimeter,Voltage,Current,Power,Resistance,Capacity Detector,with clip cable Support QC2.0 (5V / 9V / 12V / 20V) Qualcomm QC3.0 (3.8 ~ 12V +/- 0.2 step), Android BC1.2 (5V), Apple 5V / 2.4A and MTK-PE (5V / 7V / 9V / 12V).
- Testers are widely used in the quality inspection of 3C digital peripheral products, and are the first choice for digital gamers and electronic enthusiasts.Real-time detection of the state of charge of the appliance, voltage, current, power and other indicators at a glance.
- USB internal data line before and after the through mode, it can also be compatible with U disk readings and computer USB interface data transfer voltage and current measurement applications, the use of a more extensive range of USB interface can be used..
- Featured with over-voltage protection, over-current protection, low-voltage protection, charging time setting and auto-off function, the meter can detect safely and maximally protect the appliances from damaging..
- Note: The PD charger needs to be connected to your (mobile phone, tablet computer, portable computer) and other equipment during the test. The usb meter will not be turne....
Check StockUSB C Tester, 2 in 1 Type C USB Tester Color Screen IPS Digital Multimeter,Voltage,Current,Power,Resistance,Temperature,Capacity Detector,with Clip Cable Support PD2.0/PD3.0,QC2.0/QC3.0,BC1.2
- USB C Tester, 2 in 1 Type C Type A USB Tester Color Screen IPS Digital Multimeter,Voltage,Current,Power,Resistance,Capacity Detector,with clip cable Support QC2.0 (5V / 9V / 12V / 20V) Qualcomm QC3.0 (3.8 ~ 12V +/- 0.2 step), Android BC1.2 (5V), Apple 5V / 2.4A and MTK-PE (5V / 7V / 9V / 12V).
- Testers are widely used in the quality inspection of 3C digital peripheral products, and are the first choice for digital gamers and electronic enthusiasts.Real-time detection of the state of charge of the appliance, voltage, current, power and other indicators at a glance.
- USB internal data line before and after the through mode, it can also be compatible with U disk readings and computer USB interface data transfer voltage and current measurement applications, the use of a more extensive range of USB interface can be used..
- Featured with over-voltage protection, over-current protection, low-voltage protection, charging time setting and auto-off function, the meter can detect safely and maximally protect the appliances from damaging..
- Note: The PD charger needs to be connected to your (mobile phone, tablet computer, portable computer) and other equipment during the test. The usb meter will not be turne....
Check StockThe Meters
- Customer Service: KAIWEETS provides a lifetime after sale service and technical support. This digital multimeter is included with 2 AAA batteries....
- Multi-Function: This multimeter can test AC/DC Voltage, DC current (Can not for AC current), Resistance, Continuity, Diode Measurement..
- Sensitive Test: Please make sure the rotary switch is located at the right test range. Data hold function, backlight function helps you test clearly....
- Safety Operation: IEC Rated CAT III 600V, CE and RoHS certified. Anti-Burn with double fuses. This multimeter has overload protection on all ranges..
- Widely Used: The Digital Multimeter is designed to be safe and accurate, and suitable for electrician test, household use, automotive, industrial....
Check StockHoneywell T3 Pro TH3110U2008 Non-Programmable Thermostat (1H/1C)
- T3 PRO UPGRADED SERIES: The UWP uses the same wall plate system as the rest of the T Series portfolio. Footprint covers the same space on the wall as the legacy PRO 3000 model..
- NON-PROGRAMMABLE DIGITAL THERMOSTAT: This thermostat operates as 1 Heat/1 Cool Conventional digital thermostat. Single-Stage Heat Pump without Aux..
- MULTIPLE POWER OPTIONS: Battery-powered, hard-wired, or both. NOTE: No C-wire adaptor (K terminal) option available..
- PRECISE COMFORT CONTROL: Maintains consistent comfort to the highest level of accuracy of temperature ranges [ 1 F ( 0. 5 C)]. Shows both current and set temperatures at the same time..
- BACKLIT DIGITAL DISPLAY: Both current and set temperatures are easy to read in various lighting conditions. Continuous backlight requires a common wire..
Check Stock