Categories

Best Digital Force Gauge Tester

VEVOR Digital Force Gauge 500N/50kgf/110lbf Push Pull Force Gauge w/LCD Backlight Display Pull Force Tester Peak/Track Mode Digital Thrust Meter Data Storage for Compression Load Plug Force Test

  • ...cy: The tension force gauge's test rods are made of high-quality stainless steel, with extreme hardness and excellent abrasiveness. The max load value is 500N. Each product is equipped with a high-precision sensor inside, providing marvelous mechanical performance and high accuracy..
  • Various Test Modes: The portable digital force gauge features three modes, the peak value, the first peak value, and the continuous value. You can choose suitable methods according to different experimental occasions, bringing great convenience to your test..
  • Digital Display: With the sizeable distinct LCD screen, it's easy for you to read and operate. Meanwhile, you can switch freely among three units of N /kgf / lbf. The push pull scale adopts the 3.7V lithium battery and will shut down automatically without operation in 10 minutes, providing a long standby time..
  • Abundant Accessories: Our dinamometro digital comes with five tensile test pieces, an extension rod, and a JO1 fixture. It can meet most of the test requirements. The portable digital force gauge is lightweight and small in size, easy to store and carry..
  • Extensive Utilization: As a helpful tool for tensile tests, the handheld force gauge can be used for insertion or tension force experiments. It's widely applied....
Check Stock

Manometer, 12 Selectable Units Differential Pressure Gauge, Dual-Port Manometer Gas Pressure Tester, Digital Pressure Gauge with Backlight, Professional Air Pressure Meter, Handheld HVAC Manometer

  • 【Portable Manometer with ABS Material and LCD Display】The handheld digital pressure gauge is made of ABS material, and the excellent performance of high-temperature resistance and impact resistance makes the air pressure meter have a long service life. 4.45CM×4.95CM display, support LCD backlight, convenient lighting operation, display data clearer and easier to read..
  • 【Multifunctional Pressure Gauge with Accurate Readings】The digital pressure gauge adopts a high-quality pressure sensor, which has the characteristics of high precision and wide range. High-precision ADC and low-power MCU. Maximum/minimum mode and DIF mode. Professional air pressure gauges are specially used for gas measurement and calibration, gas pressure system troubleshooting, laboratory testing, maintenance and installation of blowers, clean rooms, boilers and other gas appliances..
  • 【Differential Pressure Gauge with 12 Selectable Units】The length of the two hoses in the gas pressure gauge set is 25cm.
  • The thread size of the barb metal connector is 1/8 inch.
  • 12 optional units (mmHg, inHg, ftH₂O, cmH₂O, inH₂O, Pa, KPa, mbar, bar, psi, Kgcm² and ozin²).
  • 【Manometer for Measuring Positive and Negative Pressure】There are two ports on the top of the differentia....
Check Stock

Vibrometer Digital Split Type Vibration Meter LCD Displays Acceleration Sensor Gauge Handheld Vibration Analyzer Grey

  • TWO TEMPERATURE UNITS: It can measure the environment temperature with 2 temperature units (℃ and ℉), temperature measurement 0℃ - 60℃, temperature accuracy is ±2℃.
  • MEASURING RANGE: Digital vibration tester has wide measurement range of acceleration: 0.1~199.9m/s2 peak, vibration acquisition is piezoceramic accelerometer.
  • FUNCTION: Vibration gauge analyzer adopts piezoelectric acceleration transducer transfer the vibration signal in to electrical signal, analyze the input signals, and show the vibration speed, acceleration, displacement, can meet your different using need.
  • LCD DISPLAY: Vibrometer gauge LCD displays measurement result and conditions directly, three and a half digit display, clear display for easy reading.
  • APPLICATION: Vibration analyzer tester is widely used in mechanical manufacturing, electric power, chemical engineering, space flight and aviation and other fields.
Check Stock

Riverstone Audio Record-Level Turntable Stylus Tracking Force Gauge/Scale 0.005g Resolution Measures VTF at Correct LP Record Level Height 2 mm to 3 mm Color Graphite

  • A Professional digital tracking force gauge designed for vinyl record purist's interested in precise measurement of vertical tracking force (VTF) at....
  • For optimal accuracy, tracking force should be measured at the same vertical position as the record surface. With Riverstone's VTF gauge's patented....
  • Precision strain gauge sensor provides 0.005 g measurement resolution and accurate measurements over the entire calibration range of the VTF gauge. To....
  • Manufactured using non-magnetic materials to minimize interactions with MM and MC cartridges. The housing of the VTF gauge is manufactured from a....
  • Riverstone Audio Tracking Force Gauges are covered by our no-nonsense THREE-YEAR WARRANTY. The gauge is designed with two levels of battery....
Check Stock

Manometer Gas Pressure Tester，Manometer HVAC，Digital Manometer Gas Pressure Tester，Manometer LP Gas Pressure Tester，Digital Manometer HVAC for Temperature and Pressure Testing

  • ...cturing, biopharmaceutical molding, mining pressure testing, petrochemical Industrial smelting, gas, liquid and production industrial equipment pressure detection, liquid level detection, Laboratory calibration, medical environment micro-pressure testing, etc..
  • 【High Quality & LCD Backlight Display】The hand-held digital pressure gauge is made of high-quality ABS material, which is resistant to falling and durable. The manometer hvac with 4.45cm × 4.95cm high-definition display screen, which is clear and easy to read. The manometer lp gas pressure tester also supports LCD backlight display, and can easily read data even in dark environments..
  • 【Single and Dual Channel Test】There are two ports on the top of the digital manometer gas pressure tester. With a single channel it is possible to quickly measure the current detection pressure value(relative to the current atmospheric pressure) whereas the dual channel allows simultaneous detection of the pressure difference between the two detection ports( P1-P2 ). 12 optional units (mmHg, inHg, ftH₂O, cmH₂O, inH₂O, Pa, KPa, mbar, bar, psi, Kgcm² and ozin²)..
  • 【Storage Function and Reminder Function】The digital gas manometer with backlight has the storage function, which can store 100 grou....
Check Stock

Paint Thickness Gauge,Paint Coating Tester, Car Body Damage Detector,Crash-Test Check, Car Paint Inspection,Water Resistant, Great to Have When Shopping for Used car(Size:17.8x7.2x1.7cm)

  • This is a magnetic paint thickness gauge. It’s magnetic tip is extremely convenient in reaching curved surfaces, and in hard to reach places.Its mechanical thickness gauge is water resistant, no batteries needed and can be used in the rain and on a dirty car..
  • Colored gauge shows you exactly what you're dealing with as to thickness of metals and the paint on it, and it will easily reveal any damages..
  • The tester instrument is highly accurate with a micron-level color scale due to its compatibility with digital thickness gauge. Quickly and accurately check if the vehicle has been painted in the past..
  • It’s shaped as a small pen, and is made of high quality materials, making it the perfect choice to carry around and always be prepared..
  • Package includes:1* Paint thickness tester.
Check Stock

Antstone Digital Vacuum Gauge HVAC Micron Gauge Vacuum Tester Micron Meter with 6 Units 7/16'-20UNF(1/4' SAE)

  • [Wide Measurement Range] – The measuring range of the vacuum gauge is 99999~0.1Pa(740000~0.75Micron). Accuracy is ±5%(at 20℃)..
  • [Professinal Quality] – The digital vacuum gauge uses a professional Pirani vacuum sensor, which makes the measurement accurate and fast..
  • [6 Units] – This Vacuum Tester has 6 conversion units: Pa, mBar, mmHg, mTorr, InHg, Microns. Units can be converted as needed..
  • [Humanized Design] – 1)When the set target vacuum is reached, there will be a buzzer alarm. 2)It automatically shuts down after 10 minutes of inactivity. 3)The compact tool bag makes it easy to carry. 4)Large screen electronic digital display, high-definition 720p luminous display..
  • [Complete Accessories] – The packing list includes a vacuum gauge, 3 AA batteries, an extension connector, and a portable tool bag..
Check Stock

Mxmoonfree 500N Digital Force Gauge Push Pull Gauge with USB Output 500N/110Lbf/50Kgf Force Meter with Auto Power-Off, Auto Backlit LCD for Lab Tension and Compression Destructive Tests HP-500N

  • DATA STORAGE & OUTPUT - The Digital Force Gauge 500N can store up to 999 sets of peak test data. You can also connect the computer with the USB cable attached to the product to obtain real-time test data for statistics and analysis..
  • FREE SOFTWARE - We provide free software that can export test data or charts (force versus time curve). 【NOTE】If you need software, please contact us to get it after completing the order..
  • VARIOUS TEST PARTS & STORAGE CASE - Compression test parts *4, Tenslie test part *1, Extension rod *1, which are able to meet most of simple tests. The portable digital force gauge and various accessories can be put into the carrying case for convenient storage..
  • RECHARGEABLE BATTERY - The force gauge with USB output is equipped with a built-in Lithium battery and an AC adapter. When fully charged, it can be used continuously for about 6 hours, and each charge cannot exceed 12 hours..
  • 3 MEASUREMENT MODES - This pull gauge can switch three measurement modes (Real-time/PEAK/AUTO-PEAK). In "PEAK" mode, it can hold the maximum force applied shown on the screen..
  • PARAMETERS - Model: HP-500N | Capacity: 500N/110lbf/50Kgf | Resolution: 0.1N/0.01lbf/0.01Kgf | Accuracy: ±0.5% | Data Output: USB output | Lithium Battery: 5V, 1700mAh | Charger: I....
Check Stock

Mxmoonfree 500N Digital Force Gauge Push Pull Gauge with Force Gauge Stand Wheel-Operated Manual Push Pull Test Stand Stroke 180mm/7\ with Digital Scale and HJJ-001 Clamp x2 (HLD Test Stand+HP-500N)

  • USB DATA OUTPUT - The Digital Force Gauge 500N can store up to 999 sets of PEAK test data. You can use the attached CH340 chip USB data cable to connect to a laptop and export real-time measurement data..
  • FREE SOFTWARE - We provide free software that can export test data or charts (force versus time curve). You can contact us to get the software. Mxmmonfree provides a 365-day warranty service and free technical support..
  • VARIOUS ACCRSSORIES - Digital Force Meter comes with Compression test parts *4, Tenslie test part *1, Extension rod *1, which are able to meet most of simple tests. The gauge and various accessories can be put into the carrying case for convenient storage. Test Sand comes with screws for installing the gauge and 2 pcs HJJ-001 Clamp for tensile tests..
  • DIGITAL DISPLACEMENT SCALE - This HLD Test Stand has a digital displacement scale (no output function), which can help you measure the displacement during the test. Measurement Range: 0-6"/ 0-150mm | Resolution: 0.0005"/ 0.01mm.
  • GAUGE PARAMETERS - Model: HP-500N | Capacity: 500N/110lbf/50Kgf | Resolution: 0.1N/0.01lbf/0.01Kgf | Accuracy: ±0.5% | Data Output: USB output | Lithium Battery: 5V, 1700mAh | Charger: Input (AC 100-240V 50-60Hz), Output (DC 5V 0.5A) | 2 sets of Installation Dimens....
Check Stock

Yuhoo Paint Thickness Gauge, Car Body Damage Detector, Pen-Type Waterproof Paint Coating Tester with Magnetic Tip & Micron-Level Color Scale for Verifying The Car Thickness of Paint, Free size

  • High Accurate: The tester instrument is highly accurate with a micron-level color scale due to its compatibility with digital thickness gauge..
  • Easy To Carry: Compact size about 17.8x7.2x1.7cm, It’s shaped as a small pen, and is made of high quality materials, making it the perfect choice to carry around and always be prepared. The sensor can be used by both professional business to assess the condition of the parts, and by a buyer to appraise the quality of a car..
  • Crash Tester: Perfect for checking if a car has been involved in an accident and if the lacquer is original. The sensor can be used by both professional business to assess the condition of the parts, and by a buyer to appraise the quality of a car..
  • Magnetic Tip: It’s magnetic tip is extremely convenient in reaching curved surfaces, and in hard to reach places. Its mechanical thickness gauge is water resistant, no batteries needed and can be used in the rain and on a dirty car..
  • Micron-Level Color Scale: Colored gauge shows you exactly what you're dealing with as to thickness of metals and the paint on it, and it will easily reveal any damages. The thickness of the varnish and putty is measured by contacting the tip of the tester with the magnet of the test surface (the surface must be cl....
Check Stock

Digital Force Meter, 0N/100N/300N/500N Digital Display Dynamometer Force Gauge Push and Pull Tester Meter with 5 Side Heads for Industries Machinery (100)

  • HIGH QUALITY: This push-pull force gauge is made of high-quality metal + plastic materials, strong and durable, not easy to damage, and long service life..
  • TWO MODES: This digital push-pull force gauge supports peak/real-time two modes, adapting to changes.
  • it supports real-time display of values and also supports keeping the peak value unchanged..
  • INSTANT READING: high-definition large-screen display, high sensitivity, graduation value of 0.01, accurate value of thrust and pull, digital display design, reading is more intuitive, clear and convenient..
  • MULTIPLE UNIT CONVERSION: Newton, kilogram, pound and other commonly used measurement units can meet a variety of needs and are more convenient to use..
  • WIDELY USED: Digital push-pull force gauges are now widely used in electronics, high and low voltage electrical appliances, automobiles, chemicals, light industry, construction and other industries and scientific research institutions for tensile and compression loads, insertion and extraction forces, destructive test tests, etc..
Check Stock

HT-1201 Digital Vibration Meter Vibrometer Acceleration Sensor Gauge Analyzer Tester for Vibration Speed Acceleration Displacement

  • 【Widely Used】Digital Vibration Meter Tester adopts piezoelectric type acceleration sensor and is suitable for measurement of conventional vibration of mechanical equipment. It can measure the vibration speed, acceleration, displacement and is widely used in mechanical manufacturing, electric power, chemical engineering, space flight and aviation and other fields..
  • 【Display】This Digital Precision Split Type Vibration Meter Tester has three and a half digit backlight display.LCD displays measurement result and conditions directly.It can measure the environment temperature with 2 temperature units (℃ and ℉).The default state after power on is acceleration measurement unit (m/s2). Press ▼ key to switch to (mm/s) measurement unit or displacement measurement unit (mm) At the time of measurement, press the probe against the measured objects perpendicularly..
  • 【Parameter Reference】Measurement range: acceleration: 0.1-199.9m / s2 (peak value), speed: 0.1-199.9mm / s (effective value), displacement: 0.001-1.999mm (effective value), measurement accuracy: ± (5 % + 2digits), temperature accuracy: ± 2 ℃, frequency range and other parameters have been listed in the description, please confirm the parameters before buying..
Check Stock

Mxmoonfree 500N Digital Force Gauge Push Pull Gauge Portable Force Meter with Units N/ LB/ Kg/ Oz, Storage Case, Auto Backlit LCD, Auto Power-Off (ZMF-500N)

  • 4 MEASUREMENT UNITS - The portable digital force gauge can switch between 4 units of N / Lb / kg / Oz.
  • 3 MEASUREMENT MODES - This pull gauge can switch three measurement modes (Real-time / PEAK / First-PEAK). In "PEAK" mode, it can hold the maximum force applied shown on the screen..
  • AUTO POWER OFF - The push pull scale can set the automatic shutdown time and automatically shut down without operation for a long time to achieve the effect of power saving. The auto shutdown time can be set within 0-15 minutes, and the default time is 10 minutes..
  • MIN FORCE SHIELDING - The dynamometer can be set to shield the display of data below 0.5% of the full scale. This function can be cancelled, and the instrument defaults to enable the minimum force shielding function..
  • APPLICATION - The handheld force gauge is widely applied in pull push load testing, insertion force or destructive experiment and industry like electric, hardware, automobile parts, lighter and ignition system, light industry, mechanical, textile....
Check Stock