Categories

Best Digital Logic Design

Rigol MSO1104Z-S KIT - 100 MHz MSO with Waveform Gen. and Logic Probe (4 Analog, 16 Digital Channels)

  • 100 MHz MSO with 2 Ch/25 MHz source, 4 analog/16 digital channels with logic probe.
  • Includes DS1104Z-S Plus scope and RPL1116 logic probe.
  • Includes 2 channel integrated waveform generator.
Check Stock

5Pcs SONY SR716SW 315 Coin Cell 1.55V Silver Oxide Watch Battery Made in Japan

  • Driver unit: 50mm (CCAW voice coil adoption) / Reproduction bandwidth: 5-25,000Hz / Power supply: Built-in lithium ion chargeable battery.
  • Battery life: 12 hours (With fully charged built-in lithium ion chargeable battery) / Weight: 320g, processor - 410g.
  • Decoder: Dolby TrueHD, Dolby Digital Plus, Dolby Digital, Dolby Pro Logic IIx, DTS-HD Master Audio, DTS-HD High Resolution Audio, DTS 96/24, DTS-ES, DTS, DTS Neo:6, MPEG-2 AAC, LPCM 2ch/5.1ch/7.1ch, Dolby Pro Logic IIz.
  • Input terminal: HDMIx3, Opticalx1, Stereo pin jack x1 / Output termail: HDMIx1, Opticalx1.
  • Included Accessories: AC Adapter Optical digital cable (1.5m) Charger micro USB cable (1.5m).
Check Stock

Mastercam 2017-2020 - Introduction To Mastercam Video Tutorial in 720p HD

  • No Hardware Required: Virtual PLC on your Computer.
  • Manuals and examples in electronic format.
  • Programming in Ladder logic or in Function logic.
  • Analog or digital variables, Multiple timer counters, clocks.
Check Stock

NXP 74HC4052N 74HC4052 - Dual 4-channel analog multiplexer/demultiplexer DIP16 1 Pack

  • Wide analog input voltage range from -5 V to +5 V.
  • Logic level translation: to enable 5 V logic to communicate with ±5 V analog signals.
  • Typical ‘break before make’ built-in.
Check Stock

Weewooday 15 Pieces 5V Relay Module 1- Channel Relay Control Boards with Optocoupler Isolation High and Low Level Trigger Expansion Board

  • Relay module: this relay board supports high and low level trigger and can be controlled by any 5V digital output of the microcontroller.
  • Parameter details: maximum load of normally open interface: AC 250v/ 10A, DC 30v/ 10A, trigger current is 5mA.
  • The 5v relay control board adopts SMD optocoupler isolation, which has strong driving ability and stable performance.
  • Practical design: with fault-tolerant design, the relay module will not operate even if the control line is disconnected.
  • All interfaces can be provided through directly connected terminal s since the humanized interface design, it is very convenient to use.
  • High compatibility: the relay module can be directly controlled by the 5V logic signal provided by the microcontroller, suitable for 8051, Raspberry Pi, PIC, DSP, ARM, AVR, MSP430, TTL logic, etc..
  • Wide application: this 5V relay board can be applied with Raspberry/ CNC machine/ ARM/ PIC/ AVR/ MCU/ PS4 and more.
Check Stock

UNI-T UTG962 + UTD2152CEX, Function Generator and Oscilloscope Kit

  • MSO3000E not only has 4 analog channels, but also provides 16 digital channels to accurately capture and display digital level signals and bus logic status.
  • Built-in dual-channel 50MHz arbitrary waveform generator function, integrating oscilloscope, logic analyzer and signal source into one, bringing you a more efficient test experience..
  • Rich trigger function to meet more test conditions, and the time base of each channel is independently adjustable, which is convenient for users to observe four signals with large frequency differences at the same time..
  • It has a fast numeric keyboard to input the required data quickly and effectively, and it has an independent 4-window display to bring a more efficient user experience..
  • 70Mpts storage depth per channel, while observing four channels of signals at the same time, it can maintain the highest sampling rate for a longer period of time, without losing any waveform changes, and can also analyze waveform details.
Check Stock

Rigol MSO5074 LA KIT - Four Channel, 70 MHz Mixed Signal Oscilloscope with PLA2216 Logic Probe

  • 70 MHz MSO with 4 channels, 8GS/s, 100Mpoint memory and PLA2216 logic probe.
  • Four channel (2 analog 2 digital) 70 MHz mixed signal oscilloscope.
  • This package includes a PLA2216 logic probe.
  • 100 Mpts memory depth, optional memory depth up to 200 Mpts.
Check Stock

Rigol MSO5074 - Four Channel, 70 MHz Digital/Mixed Signal Oscilloscope

  • 70 MHz Digital Oscilloscope with 4 channels, 8GS/s, 100Mpoint memory.
  • Four channel, 70 MHz digital / mixed signal oscilloscope.
  • 100 Mpts memory depth, optional memory depth up to 200 Mpts.
  • 16 digital channels included - requires optional PLA2216 logic probe to operate.
Check Stock

Rigol MSO5104 - Four Channel, 100 MHz Digital/Mixed Signal Oscilloscope

  • 100 MHz Digital Oscilloscope with 4 channels, 8GS/s, 100Mpoint memory.
  • Four channel, 100 MHz digital / mixed signal oscilloscope.
  • 100 Mpts memory depth, optional memory depth up to 200 Mpts.
  • 16 digital channels included - requires optional PLA2216 logic probe to operate.
Check Stock

UNI-T UTD2052CEX Digital Oscilloscope 50MHz 2Channel 1 GSa/s 25 kpts 2000 wfms/s

  • MSO3000E not only has 4 analog channels, but also provides 16 digital channels to accurately capture and display digital level signals and bus logic status.
  • Built-in dual-channel 50MHz arbitrary waveform generator function, integrating oscilloscope, logic analyzer and signal source into one, bringing you a more efficient test experience..
  • Rich trigger function to meet more test conditions, and the time base of each channel is independently adjustable, which is convenient for users to observe four signals with large frequency differences at the same time..
  • It has a fast numeric keyboard to input the required data quickly and effectively, and it has an independent 4-window display to bring a more efficient user experience..
  • 70Mpts storage depth per channel, while observing four channels of signals at the same time, it can maintain the highest sampling rate for a longer period of time, without losing any waveform changes, and can also analyze waveform details.
Check Stock

CYSune Digital Logic Analyzer LA104 USB Mini 4 Channels 100MHz Max Sampling Rate Built in 8MB Flash Storage 2.8 Inch Oscilloscope

  • Machine introduction: LA104 is a four-channel logic analyzer with built-in screen and battery. The casing of LA104 is made of aluminum alloy through CNC..
  • Easy to use: It is compact and portable, making it easy for users to work on bench or outdoors..
  • The effect is obvious:LA104 has a 2.8-inch LCD display that allows the measured logic waveform to show directly on the screen, without connecting to other external display devices..
  • Multiple trigger modes: There are three serial protocol analyses: SPI, I2C, UART, supporting user-defined protocol mode.
  • Muti-functional: suitable for digital hardware verification and debugging, monitoring, measurement and optimization of digital hardware performance, and integration, debugging and verification of embedded software..
Check Stock

FiiO X3-II High Resolution Music Player 2nd Generation

  • All new digital audio architecture with native DSD support.
  • Dual crystal oscillators dedicated to multiples of 44.1kHz and 48kHz frequencies for lowest jitter at all sample rates..
  • Audiophile-grade architecture and components with Cirrus Logic CS4398 DAC.
  • Updated design with all-metal chassis and fine grained matte finish..
  • New user interface design on a high quality 2-inch LCD screen.
Check Stock

Analog Discovery Systems Kit: USB Oscilloscope & Logic Analyzer

  • Two-channel USB digital oscilloscope, spectrum analyzer, and network analyzer (±25V, differential, 14-bit, 100MS/s, 30MHz+ bandwidth).
  • Two-channel arbitrary function generator (±5V, 14-bit, 100MS/s, 12MHz+ bandwidth).
  • 16-channel digital logic analyzer, pattern generator, and protocol analyzer (3.3V CMOS and 1.8V or 5V tolerant, 100MS/s).
  • Two input/output digital trigger signals for linking multiple instruments (3.3V CMOS).
  • Additional instruments including a data logger, impedance analyzer, and power supplies.
Check Stock